Ceiling panels for bathroom: selection and installation

The ceiling in the bathroom must be resistant to different influences, otherwise it will very soon be necessary to begin repairs from the beginning. It should be borne in mind that only some materials can withstand high humidity and sudden changes in temperature conditions. Such materials, as a rule, are expensive. Not every consumer can afford them. A successful solution to this problem are the ceiling panels for the bathroom.

ceiling panels The ceiling panels have many advantages compared to other materials for the bathroom ceiling:

• The main quality of the panels is water resistance and moisture resistance, because they are covered with a special film that prevents moisture from penetrating inside the panel.
• Ceiling panels do not deform - they do not change shape, there are no cracks.
• They can not appear fungus and reproduction of bacteria, which often occur in rooms with high humidity.
• Panels perfectly hide the uneven ceiling.
• All ceiling panel materials are environmentally friendly.
• They are not afraid of rapid changes in temperature conditions, which usually lead to the formation of cracks and deformations.
• They are perfectly cleaned with detergents and do not need constant care.
• Long-lasting use of panels gives a unique opportunity to make quality repairs only once and forget about it.
• Thanks to the variety of colors of the panels you can choose the right shade for any style.

1. panels Accumulation of condensation from the formation of vapors in the bathroom. Wipe with a damp cloth and leave the room open for airing.
2. Ceiling panels are made of plastic and therefore can ignite, while they emit a very toxic gas. Therefore, you should try to ensure that the panels do not have a close contact with devices that are very hot.
3. Panels are susceptible to mechanical damage, especially when punctured. That there are no cracks, it is necessary to consider this feature.
4. From direct exposure to sunlight, the pattern fades with time, and the snow-white panel begins to turn yellow.
5. Many people do not want to use the ceiling panels at home, as the plastic is associated with the office space. They do not feel the atmosphere of home comfort. But it's all a matter of taste.

All panels are divided into two huge classes: ceiling and wall.

When purchasing panels, you should consider their use.

Wall panels are characterized by a rigid structure and a large weight.

Ceiling panels are inferior in strength, but characterized by ease. When transporting the ceiling panels, you need to do everything neatly and slowly to preserve the original appearance.

Ceiling panels impress with their variety. You can choose the color gamut and texture of the panels to emphasize the style you have chosen.

If you want to visually increase the bathroom, then use the ceiling panels only light and warm colors. They can imitate ceramic tiles, brick laying and even wood texture.

You can also make a variety using the fastening method: vertical, horizontal or diagonal.

When selecting panels, it is necessary to consider their dimensions. Rack panels are available in various sizes, tiled panels are manufactured in squares of different sizes, and leaf panels have the appearance of large sheets that are perfect for bathrooms that have a considerable area. You can also experiment and use several invoices for one room at a time.

For the production of ceiling panels, polyvinyl chloride( PVC) is used. This kind of panels has become very popular among consumers, because it can withstand heavy loads and can not be deformed. Operation is possible approximately 20-40 years.

Also very often used MDF ( medium density fibreboard) for the manufacture of ceiling panels. They are very light in the fastening, and there is no need to prepare the surface before the fastening.

ceiling Do not interfere with the ventilation of the bathroom. A variety of drawings will help create an extraordinary design. Color solutions are endless.

Perfect fit, if you do not have interlace inserts inserted. With a ceiling height of less than 5 m, this will be an excellent solution.

Characterized by a unique surface that perfectly imitates natural wood, fabric, stone and even the skin. Color scales and a variety of textures will be indispensable in any interior of the bathroom.

Ceilings of this type are characterized by low weight and do not require the construction of frame systems. Therefore, they are widely used to arrange ceilings throughout the house, and for public places - offices, swimming pools and other premises.

Represented in the form of a frame, which is assembled as a lattice. It should be in each grid cell to put a tile of the material that you like. With it, you can create a glass, metal or even a mirror ceiling.

Have a beautiful aesthetic appearance, because they do not have so-called "seams".They are characterized by increased resistance to moisture, so they wash well. In addition to a huge palette of colors, decorative panels have different textures. Housewives will be pleased with the panels "aprons", because they will give originality and uniqueness to any interior of the kitchen. For the bathroom is perfect "mosaic", which will give an elegant look. For dachas you can make ceilings that mimic a brick, slate or natural stone.

Widely used, because it's fast, cheap, and perfect choice. A huge palette of colors and textures panels perfectly combines the ceiling of the panels with wall coverings.

Polystyrene panels are still widely used.

The main advantages of are water resistance, they do not deform and are resistant to sharp temperature changes. Can boast of high waterproofing and sound insulation. They are very light, so they can be mounted without assistance. They are not expensive.

Before choosing a color scheme or a decorative pattern for a ceiling, you should calculate the consumables for the entire ceiling:

• First, calculate the area of ​​the entire ceiling, which is determined by multiplying the width by the length.
• Next, by the same principle, we calculate the area of ​​one ceiling panel, all sizes can be viewed on the package.
• Then divide the area of ​​the entire ceiling into the area of ​​one panel. To the resulting number, add ten percent to form some stock.

To calculate the profile, you must start by creating a schema. For it, you need to measure the length along the perimeter of the ceiling and add parallel segments, using a step of 50 cm. The figure that turned out to be the required number of profiles.

Please note that the profiles have several markings. The UD profile usually fixes the material around the perimeter, and the CD profile is used as a strip across.

Usually, the ceiling panels are attached using dowels. To calculate their number, you do not need to do complex operations. It's simple: for every 0.5 m of the profile, one dowel is needed. Therefore, the entire amount of the profile must be divided by 0.5 and we get the number of dowels. But do not forget to add another 10 percent to make a small stock. If the ceiling panels are fixed with screws, then the same calculation should be made.

You do not need to be a professional to install ceiling panels.

All that is needed is a set of laying tools:

• moisture resistant panels;
• metal profiles;
• self-tapping screws;
• hacksaw;
• perforator or drill;
• waterproof adhesive.

If the ceiling or walls are perfectly level, then the panels are fastened to a moisture-resistant adhesive. Roller with glue must be lubricated with clean dry walls, and then attach panels.

For uneven walls, metal profiles must be used.

Before mounting the panels to the ceiling, a frame must be constructed. It is made from profiles for plasterboard, the size of which is 27x28 mm. Then it is attached to the ceiling along the perimeter. For a plastic ceiling, a profile of 27x60 mm is used, it should be attached every 60 cm. It is not necessary to adhere to this dimension: if there are some inconveniences, this step can be increased.

The process of ceiling installation from ceiling panels occurs in several stages of :

1. It should first be taken into account that the panel ceiling is in harmony with the walls and floor. Do not forget to install all necessary communications before installing the ceiling.

2. First, along the entire perimeter on the walls make special notes for the future ceiling. Take into account that between the main ceiling and the plastic must fit the inserts of fixtures or fixtures for decor elements.

3. The process of fixing the profile for the gypsum board all along the perimeter is carried out, using self-tapping screws or dowels. If the ceiling of the ceiling is concrete, the crate is attached only with dowels.

4. Profile profile poles for the ceiling are inserted into the guides, and only then can the profile be screwed to them, using the self-tapping screw with a press washer.

5. The skirting board is screwed to the ceiling along the entire perimeter. Do not forget that the skirting board is severely cut at an angle of 45 degrees.

6. Then the entire ceiling is covered with panels. They are inserted into the plinth and fixed to the ceiling profiles using a self-tapping screw with a press washer.

Please note! Mounting of panels must be started from the corner and fasten the butt joint .

7. When the last panel remains, use the tape measure to measure the distance that remains to the wall, take 5-6 mm and only then cut off the desired piece. The panel is first inserted into the plinth, and then gently pushed backwards for a good fit with the previous panel.

In conclusion, it should be noted that the ceiling panels for the bathroom are a modern and inexpensive way of finishing the .A variety of color gamuts, as well as the ability to use different materials only gives them advantages. They perfectly fit and emphasize any style of the bathroom. Ceiling panels have good quality indicators and are not fastidious to use. And also very important is that you can independently carry out their installation. You will do the repair once, and the ceiling panels will serve you for many years.