Installation of stretch ceilings video

click fraud protection

Installation of stretch ceilings photo, how to install a stretch ceiling with your own hands Video for repairing the apartment with your own hands. How to install a stretch ceiling video example.

Stretch ceiling - this is the best way to hide all the irregularities of the native ceiling. See how to choose a stretch ceiling correctly, what textures, colors, materials are. The resulting canvas should be left indoors for a while. On the canvas you can not put objects, otherwise there may be creases that after the installation of the ceiling can be seen. It is not recommended to store the canvas for more than 5 days. Installation is recommended in daylight. Now we will consider a more detailed installation of stretch ceilings with a video instruction for a snack.

Preliminary it is necessary to make a marking for the profile( baguette).For this, a water or laser level is used. Usually the distance from the stretch ceiling to the native( depending on its curvature) does not exceed 10 cm. If spotlights are installed, then the distance is 7 cm. A baguette is attached to the wall along the intended line. First it is glued with a special glue, and then fixed with screws. The distance between the screws should be the same. The profile can be metal or plastic. Joints of profiles must be glued with a molar tape. The baguette is installed around the perimeter of the room.

The next step is how to install a stretch ceiling - installation of racks for built-in lamps. Preliminary for them, you need to make wiring. It is allowed to use incandescent lamps with a power of up to 50 W, and halogen lamps with a power of up to 35 W.If it is necessary to mount more powerful lamps, then their additional thermal insulation is needed, since a high temperature can damage the stretch ceiling. In parallel, smoke detectors and a ventilation system can be installed. In case of a large ceiling area, it is recommended to install additional stiffeners so that the film does not sag.

Instruments
 Widget from SocialMart

The film is suspended in the corners. Then, with the help of a thermal gun, the canvas and the room warm up to 60 degrees. Further, the fabric is stretched and is filled with a special semicircular plastic spatula into the baguette. After cooling, the film forms an even surface.

With another method of installing a stretch ceiling, which does not require heating the room, a larger fabric is used. Installation is from the wall. First pre-fixing the canvas, slightly pulling it. Then, when the canvas is completely suspended, it is denser packed in a baguette. So the film is stretched better. Work is conducted from the middle of the wall to the corners. After the excess film is cut off.

When the suspended ceiling is installed, holes are cut in the film and insulated with insulating rings. Then the fixtures are mounted.

On the perimeter of the ceiling, you can glue the ceiling plinth( molding) and the ceiling is ready.

Installation of stretch ceilings video

Clipso company shows how they make the installation of a stretch ceiling. If you do not pay attention to English-language comments, then you get an excellent step-by-step instruction to use.

Now the video with the Russian comments, here they are debunking everything on the shelves - measuring the perimeter, how to install a stretch ceiling, choosing the best lighting option, to watch necessarily.

Now we look at a useful video how to drain water from a stretch ceiling so that it would not flood the neighbors from below and not damage the finish of the room.

Author Kurochkina Svetlana Sergeevna

instagram viewer