The pumping station Grundfos MQ 3 35 - all the features of the equipment
Table of contents
1 Equipment Information
- 1.1 features overview
- 1.2 The advantages of this option
- 2 Output
The simplicity and reliability ensure high popularity of this model
You do not know how to organize the water supply in a private house, in the country, or think about how to increase the pressure in the water? I'll tell you about a great solution - a pumping station Grundfos MQ3-35. I myself some years enjoyed such option and convinced of its reliability and high performance.
Here is the hardware connection scheme over which the assembly
Many refer to the installation of the pump Gryundfos MQ 3-35, but it is wrong. This is a full pumping station, which, unlike the pump can be operated in an automatic mode, which is very convenient.
To understand the difference, let's look at the main features and consider all the advantages of this equipment modifications.
The main technical characteristics are as follows:
|power equipment||850 W|
|maximum capacity||3 cubic meters per hour|
|Degree of protection against water||IP54|
|Pressure in the hydraulic system,||Up to 7.5 bar|
|Inlet pressure||3 Bar|
|The maximum water flow range of horizontal||36 meters|
|The maximum noise level during operation||Up to 55 dB|
|The height of water rise||Up to 8 meters|
To calculate the parameters of the water supply, use the chart below: Vertical pick lifting height, horizontally to see the maximum length of the pipeline.
On this chart, you can easily calculate the maximum distance water supply
We now consider other important features:
- dimensions. Pumping station Gryundfos MQ 3-35 characterized by compact dimensions. Length 570 mm, width 218 mm, height 320 mm allow to fit the installation even in limited space. You can put the equipment under the sink or even hide it inside the walls in the bathroom;
Compact installation allows to fit in a food locker
- 2 meters of cable length. You need to take care of that within this distance had been placed socket. Best of all, if the pump will go separate line and not part of the common wiring;
- Weight 13 kg. Low weight allows you to install a pumping station on the floor and on the brackets or on small platforms. The main thing is that the installation is horizontal;
Light weight makes it easy to carry and installation
- Quality and Warranty. Gryundfos company based in Denmark, the equipment is manufactured in the EU and is of high quality and reliability. The warranty period is 24 months, but if the water quality is good, the system will serve several times longer.
Price pumping station is 2-2,5 thousand rubles (prices are relevant for the spring of 2017).
The advantages of this option
By themselves, the characteristics of nothing is said. Let's see what advantages does this model:
- serviceability. The system is fully automatic, you only need to click on a simple control panel, after which the equipment will work without any configuration on your part. The photo below shows the control panel - it has only one button and a few indicators, showing the operation of the system and a fault when it occurs (user prompt appointment of each element);
The control panel is simple
- The presence of pressure tank. This element allows you to reduce the on-off cycles of the equipment at the leaks in the system, which protects the construction details from premature wear;
- Small noise. Automatic pump, which pumps water from the coolant system, however during its operation almost no noise is generated. This design provides increased reliability, as long as there is water, no detail is overheated;
- Good governance. The board is responsible for the activation and deactivation of the pumping station, it is very quick to respond to the change in pressure in the pipe, so the pressure differences are almost imperceptible. Sam electronic unit is protected against the ingress of moisture plastic housing;
- Easy installation. The connection can be made with your own hands with plastic fittings, all the details will prompt guide with detailed diagrams. Installation can be positioned both horizontally and at a slight incline, you do not have to align perfectly the surface;
Pump station MQ may be disposed at a slant of 18 degrees is not more
- safety. In the construction system is that the pump is switched off in the absence of water in the system and in case of overheating of individual parts of the unit. This prevents equipment damage when stopping delivery of water in the water or in case of overheating of parts due to wear;
- excellent moisture protection. Thanks to a sealed body, you can put the Grundfos MQ 335 both indoors and outdoors. This is a great option for summer use in the country - you just have to bring pre-piping and connection and disconnection of the equipment will take a few minutes. And thanks to the low weight to remove the system does not take much.
Ability to use on the street - another big advantage of this modification
When used outdoors it is important to clean up the installation time - if it freezes, then it will not be able to recover.
Now you know all the necessary information about the MQ 3-35 pumping stations, and you can decide whether this option is right for your house or apartment. Videos in this article will reveal some aspects of the theme even better. If something is not clear - do not hesitate to ask questions in the comments.