How to choose and install on their own deep pump Aquarius

You are interested in deep pump Aquarius, but you do not know whether it is right for you? Having accumulated experience, I am ready to talk about its technical parameters and how to install your own hands. With a relatively low price this device a fairly high quality, which allows me to recommend it for purchase.

Pumps for wells Aquarius - the optimal solution for private home or cottage.

A few words about the device and the principle of operation of the equipment

For pumping water from wells using 3 types of units:

1. centrifugal,
2. vortex,
3. vibration.

For use on small domestic wells are best suited centrifugal design, in this case centrifugal pump for wells Aquarius.

Centrifugal principle is best suited for use on small wells.

These pumps consist of the suction motor and the working block, there is a group of control capacitor, but it is mounted on the surface.

The control capacitor group in the downhole pump Aquarius put the German company «Thermik», it often is not a problem.

So the electric motor rotates the shaft on which are fixed several impellers with vanes. When rotating wheel creates a powerful centrifugal force, the water entering the lower chamber is captured and the centrifugal force pushes it up into the next chamber.

With every rise in the energy of the water flow increases, resulting in the output we get a powerful head. The more unit impellers, the higher specifications of the machine, but in detail the most popular models on the parameters I will a bit later.

The electric motor and the working part of this unit split.

Electric motor for submersible pump Aquarius is standard, in a casing filled electrical oil installed stator, a rotor and a group of bearings.

Do not forget to monitor the oil level.

The selection and installation of the pump

Kharkov Plant "Promelektro" under the name "Aquarius" produces units:

• ground-based;
• deep drainage pumps (dirty water);
• borehole pumps for drinking water.

To distinguish them in the directory can be on the label.

Note that under the name "Aquarius" household vibration pumps still produces Cherepovets plant, but they are low-power, and most importantly for the wells are not suitable, so look for Kharkov.

Submersible pumps can provide water as a house and a neighborhood.

Marking and popular models

We are interested in Aquarius BTSPE pumps (centrifugal, submersible pumps, domestic). To understand the marking just for example, take the pump Aquarius BTSPE 0,5-100U 60/150:

• 0.5 - indicates performance, number of liters per second (l / s);
• 100 - the height of the water column during normal operation, measured in meters;
• 60 - it is also a performance characteristic, but when operating in the overdrive mode, measured in liters per minute (l / m);
• 150 - the height of the water column in the overdrive mode.

By selecting a downhole pump Aquarius, you can use the schedule.

The unit should be selected according to individual requirements, according to your well performance, it should be specified in the certificate for the well. Do not take with a reserve, the pump will pump all the water, and when dry, can quickly burn out.

Pumps Aquarius BTSPE divided into 4 areas of performance:

1. BTSPE-0,32 l / s,
2. BTSPE-0,5 l / s,
3. BTSPE 1,2 l / s,
4. BTSPE 1,6 l / s.

Plus in each direction has its own range. On average, the price of domestic units ranges from 7,400 rubles., Up to 27,000 rubles. (Prices are relevant for the spring of 2017)

Often in a country house or cottage well is being drilled in the sand, in such wells production rate (productivity) is limited, so there is better to take the Aquarius BTSPE-0.32. In this niche 9 presents models with different characteristics.

Specifications lineup BTSPE-0.32.

Aggregates series Aquarius BTSPE-0,5 can also be used for wells on the sand, but the performance of such wells should be greater than 3 cubic meters per hour. In the line there are 8 models.

Specifications range BTSPE-0.5.

Units series Aquarius BTSPE 1.2-wells are not suitable for low performance. These units are installed on artesian wells - put them to several houses. The line is represented by 8 models.

Specifications range BTSPE-1,2.

Pumps Aquarius BTSPE-1.6 it is closer to the industrial version. If we talk about private homes or cottages, these borehole pumps are mounted on a powerful 1 artesian well and give the water a whole garden association or a small area.

Specifications lineup BTSPE-1.6.

Self-assembly

Call a specialist for the installation of the pump in a country house in the first place, will cost a lot of money, and secondly it makes no sense, all you can do yourself.

Instructions are readily available.

illustrations	recommendations
	Instruments: A pair of movable gas keys; Set carob keys; Hacksaw; Knife.
	materials: Foum tape; Brass check valve; Brass adapter for the check valve; HDPE pipe; Plastic collars can span; Downhole well head or adapter; A metal cable with a corrosion resistant coating 4 and clamp it.
	Set the pump for wells Aquarius: Box; Nylon rope; Capacitor group; power cable; Pumps for wells Aquarius. The rope is designed for hanging the unit in the well, so that's - throw it out immediately and replace metal cable.
	Putting the transition unit at the pump. The check valve has an arrow indicating the direction of flow, if you mess up, the pump will burn.
	Is wound on the thread adapter fum tape;
	Adapter is screwed into the pump neck and firmly tighten two gas keys;
	Is screwed onto the adapter check valve and also delaying;
	The check valve is screwed into the adapter HDPE pipe;
	Brass adapter; The check valve; Adapter HDPE pipe.
	Connect a pipe. HDPE pipe in our section of 32 mm. By the adapter is connected by means of sealing gaskets, they are included with the adapter.
	cable tie. Pump better fix. In the photo attachment of electrical cable, electrical tape, but generally it is better to do it with plastic clamps.
	Fasten the steel cable. Note that the steel cable is passed in both ears at the pump;
	Now take clips for steel wire rope, wire rope threaded through them and tighten the clamp keys. You need to fix in two places; Exactly the same loop are doing on the opposite side of the cable, it will cling to the carbine set on the center pole;
	To rope edge and clips less rusted, I shook their tape, and then the whole "bouquet" pulled a plastic clamp.
	installation tip: Further parse headroom, the plant in the tube and clamping it; Thereafter, through the carabiner clings to the end walls tether; Keep in mind - the pump should hang on the safety steel cable, not on the tube. The minimum gap between the well bottom and the pump 50 cm.
	We omit the pump into the well and secured to the well head casing. Headroom is fastened by means of gaskets and clamping screws. If the edge of the casing there is an extension with a thread, it should be cut, otherwise not nalezet headroom.
	missing parts. The pump is in the public assembly, so I recommend to purchase: Dry-running sensor as the photo (in case the water end into the wellbore); voltage regulator with protection against surges.

Output

The above statement is checked in practice, therefore, the selection and installation, you should have no problem. The video in this article you will find a number of nuances, and if any questions, please write in the comment - try to help.

Each choose a suitable downhole pump Aquarius.