Homemade summer garden shower at the cottage

Contents

  • 1 Shower planning at the cottage
  • 2 Shower room dimensions
  • 3
  • 4 shower shower foundation
  • 4 shower foundation installation
  • 5 shower garden shower assembly
  • 6 shower garden shower arrangement
  • 7
  • 7 shower water installation
  • 8 shower water fitting
  • 9 shower house insulation

shower headhands can be erected, following simple instructions. In the first, turn it is necessary to take into account how the country holiday will be spent from city vanity. A long summer vacation will require the installation of a global fixed building. With a short stay for a full rest in the garden or in the garden the best option will be a simpler design.

The main purpose of building a summer shower with your own hands is to conduct comfortable water procedures, which are highly desirable in the hot season. Therefore, it is very rational to approach the development of design parameters.

Planning a shower at the dacha

buy instagram followers

Installing a summer shower with your own hands, you need to decide on such important nuances as the organization of the flow, the method of supplying water to the tank and the way it is heated.

When selecting a location, it is recommended to pay attention to the following indicators:

  • Water distribution;
  • Presence of a hill;
  • Distance from the residential building;
  • Blown.

A normal water supply will be possible with proper consideration of the installation of the connecting pipeline. A rapid outflow of waste water is ensured by a small inclination angle. Therefore, it is best to build a shower in the dacha with your own hands on a hill.

The construction is not always close to the residential structure, but it is not recommended and a very long distance from it. Also it is necessary to give preference to the area most protected from drafts.

You can independently develop a variety of projects that will make it easy to build a shower house with your own hands. A visual drawing more clearly outlines and determines the choice of the most successful layout of the future structure.

Summer shower at the dacha - drawing

Drawing of a summer shower in a country house

Dimensions of a country shower

A shower in a dacha should not be a narrow booth with a barrel for water from above. When calculating the dimensions of the building, you should take into account your own dimensions, as well as all those who will regularly use the shower. Inside there should be a comfortable space that allows you to stand upright, turn around and bend easily.

When you build a country shower with your own hands, the standard dimensions are 190x140 cm. With these calculations, the shower enclosure has dimensions of 100x100 cm and the locker rooms are 90x40.The height of the structure can vary from 2 to 3 m.

When marking the location of the future shower, it is necessary to pay attention to the thickness of the material used. As a rule, for this type of construction a board is used, the standard size of which is 10 cm. Thus, from the calculation that the dimensions of the layout of 190x140 cm should be marked on the soil rectangle 200x150 cm.

Foundation of the summer shower

.The foundation, whose thickness is directly dependent on the material used. With a hollowed form of soil, a monolithic foundation 40 cm high is recommended. Before its installation, it is necessary to create a sand pillow. For other types of soil, preference should be given to the pile foundation installation technology.

The foundation of the garden shower

How to lay the foundation of a summer shower in the country.

For laying a pile foundation it is necessary: ​​

  • Do holes in the soil depth of 1-1.5 m or drive piles into the ground;
  • Install asbestos-cement or metal pipes having a diameter of 90-100 mm, leaving projectors above ground level 20-30 cm;
  • Make a recess at an angle for the drain pipe;
  • Insert the drain pipe;
  • Fill piles with concrete by pre-preparing the concrete mixture according to the instructions;
  • Align the surface;
  • After drying, it is necessary to coat the foundation with PVC film or a two-layer ruberoid;

Arrangement of a garden shower drain

Drain shower in the country

How to organize a sink in the shower in the country.

The drain system must be installed, taking into account the selected technology. The main place is laid by the laying of the pipeline, which is connected to the common sewerage system.

Instruments
Widget from SocialMart

If there is no sewage network or sewer nearby, you should dig a pit corresponding to the tank size. On average, the size of the drainage pit is 2-3 m. In addition, it is necessary to think about venting the drain.

Mounting the frame of the garden shower

An important step in the construction of a garden shower with their own hands is the installation of the frame of the future building. For the frame, metal or wooden beams are used. The installation of the frame should be carried out in stages. For this it is necessary: ​​

Skeleton frame

Construction of the frame of the country shower.

  • Install the beams at the corners and concrete them;
  • After drying the concrete, hold the lower and upper strap;
  • Secure the foundation of the walls with each other using stiff strips;
  • Make an internal dressing that serves as lags for the future sex.

Floor leveling

When starting the floor installation, you should consider such requirements as a high degree of surface hygiene, ease of care and the degree of slip. The first stage of floor design is the formation of a threshold that will divide the locker room and the washroom, and also eliminate the flow of water. Next, you can mount a boardwalk or install a special shower tray.

When finishing with uneven bars, there should be no slits that contribute to drafts. The pallet assumes the presence of a drain hole, from which the hose is withdrawn. This item eliminates the accumulation of moisture on the surface after washing.

Installation of water supply for garden shower

The main stage in the construction of a garden shower with your own hands is the installation of water supply. An excellent reservoir for water supply is a metal barrel or a plastic tank painted in black. Standard volume - from 100 to 200 liters. In the tank, a water level meter or valve should be installed that will block the flow of water when the tank is full.

The watering divider should be placed above the head level. This will help avoid pressure differences during operation.

For the shower tank in the country house, it is necessary to create a greenhouse based on the beams covered with PVC film. The tank can be glued with foil, which will help to speed up the process of heating the liquid from sunlight.

Water tank in the summer shower

Scheme of a water tank for a garden shower.

The tank must be mounted on top of the shower structure. To carry out the water supply, you should weld a water pipe or install a pump hose. Heating of water can be done with the help of a thermoelectric heater. This method shows itself as the most practical and economical.

Heaters are divided into two types - dry and wet. Dry work without direct contact with water, which eliminates the possibility of the appearance of scale on them. Therefore, such devices can last longer. However, wet TENs are much cheaper, so they are more common. When installing electrical heating equipment, it is necessary to take into account the safety techniques, to ensure the isolation of water from electricity, to ground and install the protection ouzo.

Thermal insulation of the

For the warming of the country shower, as a rule, foam plastic, expanded polystyrene and other insulating materials are used. For insulation of the structure it follows:

  • Fill the frame space with insulating material;
  • Cover with a plastic wrap and secure with a stapler;
  • You can also install overhead heaters on the door.

Facing the country shower

Before you make a shower at the dacha, you need to determine the outer lining. Most often, the material is similar to a residential building. When choosing a material, one should give preference to one that provides ease of installation, and also has strength and resistance to moisture. The best options are slate sheets, wooden beams, plastic panels.

The inner surface must be covered with a material resistant to moisture. The best fit is PVC lining. Wood is not recommended, which in this version will have a short service life.