How to choose the interior doors: 5 tests, that will make sure you liked the product in high quality

Interior doors are both functional and aesthetic value. In this regard, and to approach their choice should be especially careful. In this article I want to highlight the main aspects on which it should be to draw your attention.

Photo of interior doors

Approach to the selection of thoroughly

Before turning to a serious test of the door leaf, make sure that it is made of polluting materialWithout toxicity. Best of all, if the main part of the structure will be made of solid wood or wood veneer.

The wooden door to be installed in residential premises

Why such a material for interior doors is optimal?

To understand the answer to this question is quite familiar with its advantages, among which are:

• natural origin. Wood products are completely safe, even for young children and allergy sufferers that fully satisfies the above-noted first request;
• low thermal conductivity. Yes, the apartment is heated, and the front door with a heater, but, first, to separate the individual insulation room still does not hurt, and secondly, this figure is also a characteristic that the canvas will always be warm on touch;
• high Attenuation. This is more than a visual advantage, thanks to which it is possible to shut down for rest in the bedroom, even during children's games in the living room;

Wooden door in the bedroom - and reliable protection for your holiday

• A wide range of. It is appropriate to mention not only of the many varieties of wood, differing in cost, physical properties and appearance, but also on the amazing possibilities of timber processing, so the door leaf can be decorated with original art thread;
• High resistance to mechanical stress. Damage to wooden doors is not easy. And even if, for example, pets managed to still leave them scratching, everything can be solved by re-varnishing.

In such qualities may be marked as a negative side as:

• The relatively high price. Natural Veneer, and even more so the array does not differ cheapness. But because the purchase is carried on for many years, so that there is better not to be greedy;
• Fear of dampness. In general it can not be ignored, since inside the apartment or dwelling house priori should be dry. Otherwise, will suffer not only doors, but also tenants.

So again with the material we have decided, now we move on to the selection of interior doors more scrupulously:

Test №1: quality control coating

The application of varnish to the door leaf

Appearance of the door you can already tell a lot.

This is especially true of its cover:

1. The presence of spotsAnd turbid or heterogeneous areas that make the door dirty color indicates that the applied tinting to conceal various defects, irregularities and gaps, which provided high-quality assembly be no must;
2. Also pay attention to the presence of porosity, small tubercles, hairs and debris under the paint layer. For clarity, it is desirable to even hold his hand over this surface. Palm feels all the described drawbacks;

Spend a fingernail to cover an interior door. If it will be a scratch or even formed chips, keep in mind that this painting is not only a poor quality, but in general can be harmful to health.

1. door ends opposed to each other colors - another sign of poor-quality products, the purchase of which should beware

The main symptoms of poor coating

Test №2: geometry inspection

To select high-quality door is also necessary to pay attention and its geometrical parameters, or rather two of the most basic aspects:

1. Bring a tape measure to the store building. With its help with their own hands , measure and compare with each other the two diagonals of the door leaf. If the products are made using high-quality equipment in the manufacturing conditions, the difference between these values ​​will not exceed one millimeter. Samples also collected "on his knees" in sweatshops made measurements may vary, even a centimeter;

Construction tape will help to establish the quality of the equipment, which is manufactured using the Door

1. Also worth note on the end of the door leaf. If he looks like the Group of Eight, it means that the wood drying technology has been brokenAnd a curvature over time, will only get worse. Why do you need such a problem?

The main problems, concerning the geometry of the door leaf

Test №3: check the quality of surface treatment

Doors must be smooth and pleasant to the touch. Spend it on hand. Pay special attention to the ends of the attention that they did not have any rough and uneven. Tactile sensations play a significant role in testing the quality of the door panels.

Test №4: check glass inserts

Examples of interior wooden doors with glass inserts

Very often, interior doors in order to enhance the aesthetic qualities of glasses equipped. But the insertion of the already fragile and foreign wood material is sufficiently weak spot in the door leaf, requiring special attention.

Here, "not to miss" with the choice you will the following statement:

1. A little shake you liked the product. If the glass emits a rattling sound, it will signal about its weak fixing. In this case it is better to abandon the purchase;

If the surface has a matte dull or greasy spot, keep in mind you will not be able to bring it home. Such defects are removed only with a special factory equipment.

Frosted glass must be clean, without any spots or muddy areas

1. Ask glass origin. Cheap samples of unknown manufacturers may be too fragile not withstand operational loads of everyday life of your family;
2. You will also receive and information about the used seal. After all, he is responsible for the insulation construction parameters.

Test №5: check connections

Before choosing interior doors finally, be sure to consider the articulation of all its elements, in particular fillet. There should be no gaps, as well as any other irregularities or protruding edges.

shopping

How to choose the interior doors can be proposed from the current range of manufacturers?

I'll give you a few good examples, but I repeat that to buy a structural element for your home or apartment should be exclusively after survey with their own eyes and feeling with his own hands, using the above recommendations.

When purchasing be sure to also ask them to present a certificate of conformity. This is a very serious purchase guarantee of a really high quality stuff.

An example of a certificate of compliance for interior doors

• "EKOSHPON TURIN 508.12» Model:

Sample "EKOSHPON TURIN 508.12" model

• "EKOSHPON BETA" model:

Sample "EKOSHPON BETA" model

• "EKOSHPON Delta" model:

Sample "EKOSHPON Delta" model

• "EKOSHPON 3/1" Model:

Sample "EKOSHPON 3/1" model

• "EKOSHPON GAMMA" model:

Sample "EKOSHPON GAMMA" model

• "EKOSHPON 3/3" Model:

Sample "EKOSHPON 3/3" model

• "EKOSHPON L3PG1" model:

"EKOSHPON L3PG1" model sample

• "EKOSHPON №4H" model:

"EKOSHPON №4H" model sample

• "KOSHPON 290" model:

Sample "KOSHPON 290" model

• "EKOSHPON ALBERO SAN REMO SYMPHONY-1" Model:

The sample model "EKOSHPON ALBERO SAN REMO SYMPHONY-1"

conclusion

From the article, you learned how to approach the selection of interior doors. Videos in this article contains more information and can ask any questions you have on the subject in the comments.

Doors should be beautiful and quality