The dimensions of the bathroom: norms and standards 4 kinds of fonts
Table of contents
1 Dimensions of bathrooms in your own house and apartment
- 1.1 Regulations
- 1.2 Standard dimensions of the bathroom in apartment buildings
2 Dimensions baths of different materials
- 2.1 View 1. Cast Iron font
- 2.2 View 2. steel counterparts
- 2.3 View 3. acrylic bowls
- 2.4 View 4. Triangular and corner baths Acrylic
- 3 Output
Value vannogo premises need to know to choose the optimal font size.
The most important parameter in the planning of housing - it's the size of a bathtub. In this room, you need to build a rational and comfortable interior. For example, the size of the room depends on what size bath, and the material from which you install it. Let's understand what the standard sizes bathrooms and bathing bowls.
Dimensions of bathrooms in your own house and apartment
Bathroom size is necessary to know in order to determine together whether it all the necessary sanitary devices, including the font.
The width, length, height and area of the bathrooms are regulated by a number of standards
Before you implement your project, for example, to expand the room, examine the regulations in this area. If they neglected the possible redevelopment of the bathroom can be found to be illegal.
Expand the bathroom as possible so that it is not over the living room downstairs neighbor.
BTI often do not allow the implementation of the project. Especially if you plan to change the configuration of the wet zone in relation to the bathroom downstairs neighbor. In this case, your bathroom can accommodate over a living room, and regulations forbid it.
If Bathing room is very small, Then it is often not possible to place all the necessary plumbing fixtures. On this basis, the owners of these bathrooms are trying to expand them. The main thing - do not violate the norms prescribed in the SNIP №2.08.01 / 89 "Residential buildings" and JV №54.13330.2011 «Residential apartment buildings."
The minimum size of the bathroom Building Code:
- room height - should be no less than 220 cm.
- The length of the room - shall be at least 170 cm.
- The width of the bathroom - should be not less than 90 cm.
Parameters bathrooms in private homes instruction is not strictly regulated. Here in the regeneration of the room you need to start with a comfortable and convenient to use.
Standard dimensions of the bathroom in apartment buildings
Dimensions bathrooms directly influence the choice of plumbing fixtures.
The pre-fabricated house, and Khrushchev provided such dimensions bathrooms:
- Small toilet with toilet - 100 × 150 cm.
- Toilet with toilet and washbasin - 150 × 200 cm.
- Small - 198 × 173 cm.
- Medium - 250 × 150 cm.
- Large - 290 × 200.
- A bathroom with a shower instead of a bath bowl - 140 × 150 cm.
When planning note and:
- distance from the shower or bath to other devicesExcept basin must be at least 70 cm;
- front of the toilet must be a clear space at least 60 cm;
- door width should be not less than 55 cm.
Dimensions baths of different materials
bowl dimensions affect its usability.
Different types of material baths are available in different sizes.
View 1. Cast Iron font
First, I explain what constitutes a cast iron bathtub and their sizes. These bowls are very durable and practical. Manufacturers produce their large, medium or small.
|Picture||The value of a cast-iron bath|
Little Hot 120 × 70 cm.
It makes it possible to save space. However, a person of average height (165 cm), it will not be able to lie down. Swim in a font you can only recline.
Dimensions bowls 130 × 70 cm is considered to be too small.|
Capacity of this size are usually made to order.
Average size bowl 140 × 70 cm.
Good fit in the bathroom non-standard configuration.
Average standard tub 150 × 70 cm.
This size cast iron bath is more common among middle-size. Some manufacturers like bowls with increased width of 75 cm.
Most Hot 170 × 70 cm.
Designed for spacious bathrooms in the apartments with a modern layout. Water in its procedures can be taken lying down.
Large tub 180 × 85 cm.
This convenient and very comfortable font can be used in a large bathroom of your own home or in the bathroom of luxury apartments.
View 2. steel counterparts
Bowl of steel inexpensive and very light.
Steel baths are the cheapest. They are very light, their maximum weight is 30 kg. The wall thickness of the cup at a 3 mm.
Disadvantages of steel baths:
- The ability to bend. Under the weight of a large enough font thin man bends. This shortens the life of the enamel lining.
- The lack of soundproofing. Exercising choice bath, keep in mind that steel cup low sound insulation. She rattles when water flows.
Dimensions of steel bowls are very diverse.
The dimensions of the steel bath:
- width can range from 70 cm to 85 in increments of 5 cm;
- length - from 120 cm to 180 in increments of 5 cm;
- height equal to 65 cm.
- depth - 50, 55 and 60 cm.
View 3. acrylic bowls
Devices acrylic heat up quickly, they are comfortable and modern.
Acrylic bowls warm and comfortableWith a high level of heat resistance and antibacterial properties.
Acrylic is very light fontSo install it with your own hands quickly and without too much difficulty. Color design of plastic bowls are very diverse. You can choose the color of the device under the colors of the room, or vice versa, do the bath to the emphasis by choosing a contrasting color for her.
The surface of plastic devices is quite vulnerable. Note that sharp objects and cleaning abrasives leave scratches on the cup of acrylic bathtubs.
Standard sizes of plastic tubs very diverse. The most in demand these dimensions:
- width - 90 cm, 100, 105-135 in increments of 5 cm;
- length - 185 cm, 150 and 140.
Example of exclusive plumbing, custom-made.
Most manufacturers are now providing services for the production of acrylic bowls on request. In the device of your project can be any size, shape and color. It can be equipped with a suitable style equipment and additional options.
View 4. Triangular and corner baths Acrylic
In the photo - Corner container for bathing: saves a lot of space.
Plastic injection molding has a great plasticity. Therefore it can make the font of any design, size and shape. For example, now popular triangular shape and angle of acrylic baths. They save space in the room and bring diversity in its interior.
The size of a standard bath triangular shape:
- length of the sides - 150-180 cm;
- depth Most of these models - 48-65 cm;
- the internal volume triangular fonts may be up to 400 liters.
In a large plastic fonts you can splash around together.
The largest model of the angular fonts are free to take water treatments two people. If the cup has anatomical recesses, niches, headrests, armrests, the projections, the tank capacity is changed upwards or downwards. The price may also change.
Bath standard shapes and sizes make it possible to plan the interior space and equipment vannogo plumbing fixtures. Knowing the size of the room and the bath, you can choose the model that fits perfectly in space.
Videos in this article will help you to do this. If you have any questions, you can ask them in the comments.