Venetian stucco coating technology: how to apply the method and equipment

Venetian plaster (42 photos) technology application from the masters of their craft

X

Table of contents

  • 1 Working with the material
    • 1.1 Preparatory stage
    • 1.2 Applying foundation
    • 1.3 creation of the hue
  • 2 Some of the nuances and peculiarities
  • 3 Total
  • 4 Photo Gallery

Modern "Venetian" - a combination of calcium-containing fillers: marble, granite, limestone, quartz chips and flour, an acrylic binder and various callers. You can do it yourself, do not be afraid of the concept of Venetian plaster - application of its technology is now extremely simplified.

Working with the material

Venetian stucco coating technology

Preparatory stage

Carefully prepare the wall. Prepared under the decorative plaster walls should be as smooth, dry and clean.

If these conditions are not met, you will need to initially align the walls with plaster and allow them to dry completely.

Soak them in two layers of a special polymer primer.

Applying foundation

Plaster is applied with a trowel or steel graters and spatulas. Selected size and shape of the tool is determined pattern and texture of the lining. The angles of all spatulas and graters should be rounded and polished, so that left irregularities and chipping.

The main work starts after the complete drying of the soil. Carefully, layer by layer, stroke by stroke coated with a grater / spatula and trowel.

Each layer must be dry, then it is trimmed to remove the irregularities. The lower layer is applied with a trowel or float general, the latter covering layer - a small spatula. After 15 minutes after application surface is trimmed fine sandpaper a circular motion.

Tip! The coating is applied to the substrate in small portions, as the material is quickly grasped. When the hold the tool at an angle of 15 ° to the walls.

creation of the hue

Instructions:

Zakoleruyte mixture. The first primer is smeared evenly over the entire wall and a base, which provides a common background color. Allow it to dry for 4-5 hours, sandpaper, sand the nulevkoy and remove the resulting dust.

The second layer of Venetian plaster with your hands to smear chaotic small strokes in different directions. Continuing remove the excess mixture from the tool edges, podohshie stucco particles can ruin the results.

The third layer produces the desired texture. Layering of strokes forming a certain pattern. To achieve the typical gloss coating repeatedly polished spatula with a little pressure from almost parallel to the wall surface. The applied decorative plaster their hands dries overnight at room temperature mode and a normal relative humidity.

coating secret concluded that the effect of the glossy surface is formed due to the special composition of the mixture applied to the two major layers. Various patterns and textures are obtained by varying the technique of motion tools, their size and effort being applied. The process of carbonization and the polymerization hardens the upper cladding layer.

How to apply the plaster Venetian

Mastering the art of work

Before Venetian stucco applied onto the surface of the wall, learn technique work on pieces of a sheet material.

A week after the last, the wall is covered with a protective wax colorless. It increases the visual effect of an optical illusion, changing and breaking the angles of rays of light.

Some nuances:

  • The colors specified in the manufacturer's catalog, may vary depending on the amount of the added dye.
  • You can use and universal colorants.
  • Wax for the plaster should not be diluted and tinted.
  • The use of wax makes it possible to create a coating in wet areas.
  • It is recommended to work with plaster to produce vykraski coating.

Such base, classic Venetian stucco coating technology. As for the method of applying highly decorative plaster, in this case, the Venetian, of which there are many and some will be discussed in the next block.

Some of the nuances and peculiarities

Application method Venetian stucco

Pearl coating (price - from 780 rubles).

Quite an interesting effect can be obtained when applied to a Venetian plaster pearl Glaze.

Coating with pearl effect can be applied on the surface of virtually all building materials. The essence of the technique lies in the application of individual spots and leveling tool.

Unlike classical "Venetian" is to work with the third covering layer, which contains pearl. As required, it is applied and a fourth protective layer of wax.

The color of this type of plaster as a decorative pearlescent selected on the color chart manufacturers that may contain up to 40 shades of primary colors with different nacre glints.

Venetian stucco application technique

In the photo stencil drawings on Venetian

No less interesting and highly aesthetic application technique of Venetian plaster with the use of drawings on a cliche.

It allows you to easily and simply, without the help of professional artists, to obtain the desired pattern on your surface.

Take a stencil made from a solid polymer film. We hasten to warn you: do not try to make it yourself or use a template from thin materials. Also, do not apply multilayer patterns.

Apply Venetian plaster in the usual way (without a protective layer), allow it to dry. Place the template on the selected portion of the wall and apply a thin layer of the composition using a large spatula. Hold the tool at an angle of 60 ° and carefully spend it on a template, remove any excess material.

Very carefully remove the film. Repeat the application pattern as many times as necessary. As soon as a characteristic matte surface, you can start polishing the image.

Tip! Do it with a trowel or spatula, take care not to damage the pattern. The longer the grinding procedure, the expressive drawing.

Total

We hope that our material has been useful for you. We can only wish you good luck and offer to view the video in this article.

Photo Gallery