Frame made of metal for gypsum cardboard: wall cladding, metal for GKL, cladding and fastening

Thanks to the skeleton made of metal profile under the drywall, the quality of the is improved. The wall and ceiling coverings are not only a budgetary, but also an extremely convenient option. That's why many masters give preference to this material. And that such a shell was perfectly even, use the trick - the frame of the metal profile. With this approach, the technology of performing works changes and becomes somewhat more complicated, but the appearance of the room becomes whole and correct.

Metal frame for gypsum plasterboard

First of all it is necessary to understand what a metal frame is and why it is needed for gypsum cardboard. It is a load-bearing structure to which the cladding material will be attached.

The metal profiles have many advantages:

• Strength;
• Reliability of construction;
• Ability to withstand heavy weight;
• It is capable of long-term operation.

The metal frame for gypsum board ensures the reliability and durability of the

. The important point is that the wall covered with plasterboard( GKL) with metal frame is absolutely even, even if the differences were significant.

It is for this reason that gypsum boards are the leader among the skin materials. Due to its properties and properly arranged frame, it is possible to construct interesting designs on the ceiling. For example, multi-level and non-standard shapes / sizes.

In addition, a similar skinning system helps to make doorways unusual. For example, in the form of an arch.

How to avoid mistakes in the construction of the metal frame for the GKL

Various unforeseen situations can arise during the installation of the carcass and the cladding.

Here is a list of the most common errors:

• Fastening a sheet of drywall to the wrong side;
• Incorrect mounting of sheets;
• Invalid choice of the profile;
• Wrong installation of the frame base;
• No suspensions leading to a skeleton failure;
• Incorrect cutting;
• Alignment of curved profile parts.

Fixing the sheet with the wrong side can affect not only the further painting, for example, painting. For example, a moisture-resistant plasterboard, installed not as it should, will deteriorate much more quickly.

The metal profile can not be cut with a Bulgarian - only with special scissors, as galvanizing can be melted at the cutting site, which will lead to corrosion.

But incorrect distribution of sheets during installation will lead to cracks in joints, Profile due to incorrect distribution of loads. Another big mistake is the use of ceiling profiles for wall cladding. This is possible, but it's not necessary to speak about strength.

Failure to comply with the metal profile mounting technology is one of the reasons for the damaged structures. Bad or incorrectly fixed profile will fall off for sure. Especially scary, if this happens to the ceiling.

In the absence of such an important detail as the suspension, cracks inevitably form. In addition, then the installation scheme will be broken, which also affects the strength.

Unraveling the profile is a very thankless task. The stiffness decreases, the profile is deformed. This reduces the strength to zero. Therefore, it is very important to comply with the installation technology, so that the design will last a long time.

The device of a metal skeleton for gypsum cardboard

It is worth noting that if it is planned to cover both the ceiling and the walls, then the installation must begin with the ceiling. Then it will be difficult, especially when repairing your own hands. In points of additional loads( chandelier, shelf, large picture), experts recommend reinforcing the frame with additional profiles and fastenings.

The arch profile is commonly used for doorways and complex figures on the ceiling.

Next, you need to determine what kind of metal profile you will need to build the frame:

• PU( angular profile for strengthening corners);
• PP( ceiling profile, to which is fixed GKL on the ceiling);
• PNP( profile directing the ceiling, which will be fixed to the wall);
• PS( profile is rack-mounted, i.e. vertical, used for wall covering);
• PN( profile for walls, which must be fixed to the ceiling and floor).

Sometimes a long profile is required. Therefore, to connect the two metal parts, a coupling is used, that is, a connector for the PP.And crabs are used to regulate the intersection of profiles: they strengthen the frame, connecting parts from metal. Direct hangers are attached to walls or ceiling, and then bend along the lines that are on the product. A metal profile is inserted into the connector. And the hangers themselves are mounted with the help of hardware.

Wall cladding with gypsum plasterboard on metal frame

For plasterboard wall covering with metal frame installation, materials and tools are required.

Here is the list:

• Directly GCR;
• Profiles;
• Direct suspension;
• Dowels and screws;
• Drill or perforator;Screwdriver or screwdriver;
• ;
• Adhesive paper tape;
• Measuring tape and pencil;
• Construction level.

Special attention should be paid to the correct fixing of plasterboard sheets to the frame - they must be installed with the right side, which will facilitate further finishing.

The first thing to do is marking for hangers, which should be located at a distance of 80 cm from each other. It is necessary to choose the most protruding part of the wall, and from it to carry out calculations. The profile on the walls should be in meters. Profiles are fastened with crabs, screws and screws. In the resulting box you can hide the heater, wires and communications.

Drywall should be cut according to the dimensions. Then it is fastened with self-tapping screws. Seams need to be glued with paper tape. You can use a ribbon in the form of a grid, but the masters recommend the use of a paper self-adhesive tape.

Then apply a thin layer of putty on the joints, and with it you can hide some depressions, if during the assembly of the sheet a little deformed. The seams are treated with sandpaper, and then the walls can be further finished. Sealing and processing of seams should be carried out at a temperature of at least ten degrees above zero. During installation, it is necessary that the humidity is normal, and there are no drafts.

The metal frame is able to withstand almost any finishing material, even the decoration with bas-reliefs. However, it is better to use polyurethane products.

We make a skeleton from a metal profile for gypsum cardboard( video)

It is not too difficult to cover walls with plasterboard on a metal frame. In addition, all materials will be affordable for almost everyone, and are in free sale in all construction stores. The final result can surpass all the most daring expectations - the main thing is to observe the installation technology, because this is the guarantee of a quality work done.