It is possible to cover walls with gypsum boards using a frameless connection or using the support frame. Today, any design ideas can be realized with such simple and popular material as gypsum board. It is now used everywhere: with its help erect interroom partitions, trim window slopes, sheath walls from the inside and outside, trim the ceiling, and also the interior decorative decoration of the room is popular. There are several ways to wall plasterboard: frameless connection and the use of a supporting frame. Most often for wooden surfaces, the second method is used, and wood is chosen as the frame material.
-
- How to decorate the walls with plasterboard in a wooden house with your own hands
- We mount plasterboard on wooden slats: the advantages of the solution
- Wall finishing in a wooden house with plasterboard: preparation for work
- How to decorate a wooden house from inside with plasterboard:We make the frame
- Walls from plasterboard in a wooden house: we prepare the material
- How to level the walls with plasterboard in a wooden house: installation of gypsum boards on the frame
- Treatment of a wall or neGypsum plasterboard in a wooden house
- How to wall plasterboard with your own hands( video)
- Interior finishing of a wooden house with gypsum board( photo process)
How to wall plasterboard in a wooden house with your own hands
Brought problems and long pleased the eye, before you start to take into account a number of very important points.
Features of the wooden frame:
- First of all, you need to know that if you decided to install a drywall on a frame of wooden bars, you need to pay attention to the characteristics of the room in which the work will be done. Remember that moisture affects the frame made of wooden rails.
- Inspect the beams carefully before purchasing: they should be free from cracks, chips and other damage.
- The wood from which the slats and beams are made must comply with fire safety standards.
- Before the work, the tree must be impregnated with an antiseptic compound: this will increase its service life. It can be any, but more often it is recommended to use sodium fluoride.
Before walling the walls with plasterboard in a wooden house, impregnate the walls with an antiseptic compound
Wood is an environmentally friendly material with which it is pleasant to work.
We mount plasterboard on wooden slats: the advantages of the
solution Despite the fact that many builders prefer metal as the basis for gypsum boards, the tree also has its obvious advantages, which make a wooden frame a worthy competitor to a metal analog!
Advantages of the wooden frame in front of the metal:
- Availability of the material and its low cost.
- High construction speed.
- Environmentally friendly.
- Easy to operate.
You can mount plasterboard on wooden slats - it's simple and affordable Before you start working with wood, the slats will need to be left for a few days indoors, where the installation will be done, for acclimatization.
Wall finishing in a wooden house with plasterboard: preparation for work
In any construction business, you can not do without special tools. To work smoothly, pre-purchase everything you need. What is needed in working with plasterboard is listed below.
Tools:
- Drill or screwdriver;
- Hacksaw or jigsaw;
- Roulette;
- Marker or chemical pencil.
Before starting to finish the walls, prepare the necessary materials and tools
Materials:
- Wooden slats and bars;
- Screws, screws;
- Metal corners.
Any finishing work begins, first of all, with cleaning the working surfaces.
First of all, it is required to remove from the walls the old coating, the remnants of insulation and sound insulation - in short, any items that can interfere with the work process.
Before work, the walls must be covered with a special primer to avoid the appearance of fungi and mold.
How to decorate a wooden house from the inside with plasterboard: we make the frame
When the walls are ready for work, you can proceed directly to the installation of the frame itself from the wooden beams.
We remind you that the slats must be pretreated with an antiseptic that will prevent rotting and destruction of the material.
Some advices before work:
- The distance between the bars should be 40-60 cm.
- The width of the slats should be of the order of 3-5 cm, but it should be taken into account that in places of joints of plasterboard sheets, Be less than 8 cm.
- The fastening of the rails is best done directly to the wooden wall and to each other. For these purposes, self-tapping screws fit perfectly.
It is possible to sew a wooden house from the inside with a frame made of wooden beams
The assembly of the carcass itself should begin with the fastening of solid beams along the walls and ceiling. After this, you can proceed to the installation of racks, which will be located vertically. Next, fix between the vertical bars additional horizontal short rails-jumpers. Between the parts of the frame can be fastened with building corners and overlays, this will give it additional stability.
During work, vertical and horizontal slats must be installed strictly in accordance with the level!
After this, if necessary, you will need to align the frame with the wooden wall. This is done in the following way: in the right places, bars of the required thickness are placed. After the installation of the frame has been completed, it is possible to begin attaching the sheets of gypsum board to the resulting rails and beams.
Plasterboard walls in a wooden house: we prepare the material
Before we start fixing the sheets of gypsum cardboard on the frame, they need to be cut. When cutting plasterboard, be careful and careful, use high-quality tools that will ensure your safety.
For cutting plasterboard sheets you need:
- Long rake or long level;
- Pencil or marker;
- Sharp knife;
- Roulette.
First of all we measure the required length and width of the drywall sheet. Next, we cut through the first layer of paper with a knife and break the gypsum board base of the sheet along the cut line. Then cut the paper of the sheet from the other side, bending it at a 90 ° angle, and grind the uneven ends with sandpaper or a file.
Before fixing, drywall sheets must be cut
When calculating sheet sizes, you should consider that you will position them with offset.
Before installation, you may encounter a problem such as cutouts. They can be on the edge and in the middle of the sheet. If the cutout is located on the edge, a jigsaw or a hacksaw, two parallel lines must be cut in the opposite direction from the edge and crack the sheet of drywall. To make a cut in the middle of the sheet, you need to cut three lines and break it.
How to level the walls with plasterboard in a wooden house: installation of gypsum boards on the frame
After preparing the drywall, you can proceed directly to its attachment to the crate. To do this, we closely apply the sheet to the slats and fix them with self-tapping screws. One edge of the sheet should be placed as close as possible to the wall. The heads of screws should be below the level of the sheet.
Important notes:
- Screws and screws must be wood: they are better fixed in the wood.
- The edges of the drywall sheets should be in the middle of the struts.
- Use an intermediate profile if necessary.
Align the walls in the wooden house with a frame to which the
sheets will be attached. When leveling the walls, keep a distance between the screws: it should not exceed 25-30 cm.
Wall or partition processing fromDrywall in the wooden house
After the installation is completed, the connections between the drywall sheets and the holes from the screws of the screws should be processed.
For this we will need:
- Spatula;
- Special putty;
- Reinforced tape or mesh;
- Electric drill with a nozzle for mixing putty.
To treat walls or partitions in the house, you will need putty, reinforced tape, electric drill and spatula
You need to start the work by preparing a filler mixture. We advise you to use a special putty to seal the seams. Also pick up a spatula, convenient for work. It should be with a flexible blade and a comfortable handle.
To avoid cracks on the seams, work should be carried out after establishing a constant temperature and humidity in the room.
A ready mix with a spatula is applied to the seams of plasterboard, as if pushing it between them, then cut off a piece of tape of the correct size and glue it onto the processed seam. Similarly, treat the remaining seams and joints. To fill the hole from the screws on the plasterboard, you need to put the putty putty on the right place, smoothing it in different directions. After carrying out all the necessary processes, you can, at your desire, prepare a wall decorated with plasterboard for further work. Options for decoration can be a mass, it all depends on your desire, imagination and possibilities.
How to wall plasterboard with your own hands( video)
Practice shows that if you adhere to certain rules and technology when plastering wooden walls, the work will not take much time and will not be difficult. In addition, by installing the drywall in a timber house on a wooden frame with your own hands, you significantly save the family budget.
Interior finish wooden house with plasterboard( photo process)
