Infrared heaters for polycarbonate greenhouses: ceiling heating, heating and reviews, gas lamps

The best heaters for heating greenhouses are infrared heaters Infrared heaters for polycarbonate greenhouse have the property of heating the soil and planted plants without heating, at the same time, the air of the room itself. This happens with the help of electromagnetic waves. This makes it possible to grow useful crops inside the greenhouse around the clock. In addition, they are more cost-effective and efficient than other heating systems.

How does the IR heater for the

work? The heater is connected to the energy emitted by the electromagnetic waves in the infrared light range.

Each type of wave has its own length, therefore they differ, as:

• Short;
• Long-range;
• Medium.

Many people prefer to install infrared heaters, as they are qualitative and ergonomic.

The equipment used in greenhouses has its undoubted advantages.

Advantages of the equipment:

• It is ergonomic, and even for a large enough area of ​​10 square meters, a device with a power of up to 500 W;
• This is an absolutely harmless way of heating, this radiation positively influences the growth of plants, enhancing their taste and useful properties;
• Infrared heaters are convenient to use and equipped with regulating devices;
• The heating process can be automatic, thanks to the additional equipment of the controllers;
• Operation is related only to the presence of power.

Heaters can be placed on the ceiling of the greenhouse - when the waves cover the entire interior space of the room, the warm air mass can not rise up.

Thus, uniform heating of soil and plants without heat leakage is carried out, and the floor of the hotbed always remains warm, even in winter.

Differences between infra-red ceiling heaters for greenhouses

Ceiling devices are most in demand, as they ensure proper heating of the area. They are safe for any kind of greenhouse coating, whether it's film or glass. And much more efficient than gas-based heating systems.

When choosing ceiling infrared heaters, their quality and basic characteristics must be taken into account.

Heaters with different incandescent elements differ:

• The simplest is a tubular heater made of aluminum plates;
• The tungsten filament in the quartz case very well conducts and distributes heat;
• Carbon fiber absorbs a minimum of electricity and has excellent heat dissipation, but it is fragile enough and has a high cost;
• Micathermic plates show good results when used in greenhouses, but at a price too expensive;
• Heating based on ceramic heaters is a good option, they spend a minimum of electricity and are resistant to humidity and different temperatures.

In most cases, the models are equipped with a thermoregulator, with which you can create ideal conditions for the growth of various plants.

Choose the most robust models, characterized by a long service life, and equipped with a regulator.

Types of heating the greenhouse by an infra-red heater by the way of installation

Infrared heating devices are portable and stationary. The latter are more efficient.

The most convenient are the ceiling infrared heaters for greenhouses

There are 3 types of devices among them:

1. Wall heating structures fixed on a vertical surface. The model can be placed in any convenient place.
2. Heating systems placed on the floor, when buying, it is best to choose the carbon and tubular versions.
3. The most convenient are ceiling film constructions. They save space in the greenhouse and cover the whole area well. Method of attachment - on brackets.

During seasonal use of the greenhouse, heating is applied from above, that is, ceiling. If early cropping is required, it is better to use floor heating.

When the goal is to operate the greenhouse year round, you can combine different types of infrared heating. Conveniently, all types use ordinary electric current, so do not worry about other sources.

It is worth remembering that ceramic heaters are not particularly strong, and, moreover, may not be safe for human health.

Choosing quality IR equipment

The wide range of products and its various characteristics make you think about which product to purchase.

Before purchasing an infrared heater, it is better to consult

when buying:

1. First you need to determine the number of IR lamps. If it is decided to use them in combination with a water or gas heater, the devices will need much less.
2. If not installed, what capacity should be used, you can consult the seller;
3. The product must be packed correctly, it must be accompanied by a quality certificate.
4. The operation must be checked in the store. In this case, it is worth paying attention to the presence of noise. Perhaps the device is not working properly.
5. When you buy, you should have a warranty card for the service and check.

Different heaters can have their own work features, and the buyer should be warned about this.

Productive heating of a greenhouse made of polycarbonate with an infrared heater

When it comes to a greenhouse intended for winter growing flowers and vegetables, a polycarbonate sheet or honeycomb is usually used for covering. For such a hotbed, you can choose any heating, as the material itself already creates a fairly comfortable level of the climate environment.

The advantage of an infrared heater is that it saves a lot of electricity

Different heating systems for this design have their pros and cons:

1. If you take a gas convector, it has the advantage of heating speed, But in this case the ventilation system of the building must be seriously considered. Gas equipment is extremely easy to install, and can also easily move from one section of the greenhouse to another.
2. For heating with water heating you will need to lay pipes. In addition to purchasing equipment, such a system can dry air and distribute heat unevenly. In addition, you will need to install a foundation.
3. Despite the fact that a lot of electricity will be spent on providing infrared equipment in winter, this is one of the best ways to heat a winter greenhouse.

However, if you place the lamps of infrared light wisely, this can save considerable electricity. For example, in a square greenhouse it is possible to arrange lamps at four corners and this will be enough for their productive work. In addition, such devices protect the room from drafts.

Efficient heating of the greenhouse with an infrared heater: reviews and tips

Infrared radiators are particularly in demand for the cultivation of early harvests. The consumers' opinion about this type of heating is mostly positive. However, there are some subtleties when using different types of IR equipment.

Read reviews on infrared heaters for greenhouses can easily be found on the Internet

The comments of greenhouse owners say that wave technology is chosen because of the main advantages:

• Naturalness of the heating process;
• Quick payback of the structure.

It is noted that the economical use of infrared lamps is enhanced when used in combination with other heating systems. This applies to year-round operation of greenhouses.

Based on user experience, it is advisable to purchase equipment with protection against vertically dripping water( IPX 1).

In order not to damage the coatings, including polycarbonate, it is important that a reliable heat-insulating material is applied in the greenhouse.

Extra power will not be consumed if the IR-reflector is used simultaneously in the operation of the ceiling radiators.

The only thing is regretted that there are too few high-quality domestic IR heaters, and foreign analogues are too high in value.

Infrared heater in the greenhouse( video)

It can be concluded that the use of infrared radiation is quite acceptable for different types of greenhouses, but, basically, it is required for winter variants. Do not be afraid to experiment - IR devices can and should be combined with other heating systems. This will help to avoid over-consumption of electricity, and in combination with other devices will create an optimal microclimate in the premises of the greenhouse.