UPS for a gas boiler: an uninterruptible power supply and a power source for heating, an external battery, how to choose a UPS

Thanks to the UPS, it is possible to extend the life of the gas boiler Modern gas boilers for heating a private house require continuous connection to the mains, and in particular for appliances equipped with automated technology systems. When the electricity is turned off, the heating system is maintained for 1-2 days using an uninterruptible power supply.

Continuity for a boiler

The design and construction of an uninterruptible power supply unit is quite simple andThis turns a stabilizer elektropotoka and battery.

This device has many advantages, in particular, such as :

• Simple installation and connection;
• Stable output voltage;
• Long service life;
• Minimum operating costs;
• Noiseless operation.

Before buying a breakaway for the boiler, it is worth reading about it reviews on the internet

Install the IPB for a gas boiler preferably in a well protected from moisture places, best in a special sealed cabinet located near the ventilation shaft. Such an arrangement will help protect the device from moisture and condensation, and also ensure its cooling. Modern gas boilers work completely autonomously. Intervention may be required only to correct certain parameters.

However, for stable operation only is required:

• Specific pressure;
• Required quantity of gas;
• Quality constant power supply.

Providing continuous power supply will help the source of uninterrupted supply for the gas boiler. You can pick up an uninterrupted( UPS) for absolutely any requests, as there are several different types of such devices, in particular such as: online, off-line, linear-interactive. The most simple and affordable are considered to be backup off-line uninterruptible power supplies. They are characterized by the fact that the upper and lower voltage limits are set, and in this range the boiler is operating normally.

When the power parameters are within the specified limits, the power is supplied directly from the network.

If the voltage becomes lower, the backup power from the batteries is activated. However, the disadvantage of this device is that the system is unstable, which is why it is only used if a stabilizer is already installed in the house or apartment. The on-line uninterruptible power supply refers to a constant type device. It is equipped with an external battery and is characterized by the fact that the incoming alternating voltage turns into a permanent one and is used to charge the connected devices. Thus, the voltage stabilization is guaranteed.

Linear interactive systems are considered an intermediate option between on-line and off-line devices. The disadvantage of such a device is that it takes a non-instantaneous switching of the device when the voltage changes. This equipment is considered the most optimal choice, as it shows good results at an affordable cost.

Uninterruptible power supply for heating boiler

The continuous power system for the heating boiler allows solving all existing problems related to power interruptions.

The uninterruptible power supply prevents the supply of electrical equipment to a high-voltage boiler

This unit is installed in a boiler room and is characterized by the fact that it is :

• No additional maintenance required;
• Features high reliability;
• Do not make any noise and sound when working;
• Do not have malfunction;
• Very simple to use.

If there is a power outage or there are various power failures, the device is accidentally connected. Make the right choice and buy a quality and reliable uninterrupted can be quite difficult. Initially, you need to familiarize yourself with the technical characteristics of the device, as well as the features of its operation.

The best and most functional uninterruptible power supplies are dual conversion devices. In addition to its main function, it acts as a voltage stabilizer. It is best to purchase a continuous power system with a double capacity reserve as to how much energy the boiler consumes.

Choosing a trouble-free kit for a gas boiler

For gas heating units, it is advisable to use continuous power sources, since the device itself and its individual parts are susceptible to breakdowns when power is suddenly cut off. However, not all of the uninterruptible power supplies are suitable for working with gas heating. Select devices with reliable and functional batteries. Important!For the stable and reliable operation of a gas boiler, it is best to select the best quality online power supply units. They provide double conversion and qualitative stabilization of .

It is not recommended to buy cheap uninterruptible power supplies for a gas boiler because they are unreliable

Among the available offers, the most popular models are :

• Energy;
• Bastion;
• Leaton;
• General Electric;
• Eaton.

It is best to give preference to the models of Russian manufacturers, since after mounting and setting of the main parameters, one can not worry about the safe operation of the gas boiler and the available additional equipment. Such devices can be mounted very easily without the use of experts. Acquire the device can be fully equipped or to assemble the device in parts. It is worth remembering that the battery needs to be purchased from the same manufacturer as the electronic unit, otherwise it will have to do power calculations.

Efficient emergency for the boiler with external battery

For the gas column, you must additionally purchase a fail-safe, as this will protect the device in case the electrical energy is unstable or it frequently turns off. Even the most modern and functional stand-alone device is not protected against power surges. That's why we need an uninterrupted power supply for a gas boiler, which is best suited to an external battery.

Uninterruptible power supply for a boiler with an external battery is characterized by a long service life and high reliability

The power outage can be :

• Temporary;
• Extended;
• Fan.

The temporary shutdown continues for only a few minutes, and then the electricity is switched on again. Long-term power outage can be for several days and occurs due to serious breakdowns or repair work. Fan blackout is characterized by the fact that it happens daily at the same time for several hours. Uninterruptible power, depending on its model and configuration, allows to maintain the efficiency of the heating system for a period of several minutes and up to several days. Everything depends on the power consumption and the capacity of the batteries used.

How to choose an uninterruptible power supply

An uninterruptible power supply or as it is called UPS, is designed to stabilize electricity. However, in order for the device to last for a long time, it is necessary to select the correct UPS, and also to mount it correctly, for which there is a special instruction and diagram for connecting the main elements.

When choosing an uninterruptible power supply, it is necessary to pay attention to such parameters as :

• Power;
• Battery life;
• Battery type.

When purchasing an uninterruptible power supply, it is absolutely necessary to get the warranty card

from the seller. To find the optimal power of the device, you need to find out the total electrical power of all devices that will be connected to it. The result should be multiplied by 1.3 and, as a result, the required power of the device will be obtained. To determine the operating time of the uninterruptible power supply, you need to schedule the maximum battery life and purchase the appropriate number of batteries.

Battery for gas boiler

With frequent voltage drops and for uninterrupted heating of a country house, you need an uninterruptible power supply.

This device consists of such units as :

• Inverter;
• Voltage stabilizer;
• Rechargeable batteries.

The battery for a gas boiler can be purchased from a specialized store

The inverter element for a heating boiler plays a very important role, since it converts the translational voltage into a constant one. This is necessary for the normal operation of the automation of the gas boiler and the heating system. The voltage stabilizer is required in order to bring a low-quality power supply to the level necessary for the correct and stable operation of the electronics. The accumulators accumulate the required amount of electricity and serve as a source of energy for the gas boiler and other units of the heating system.

Battery for an uninterruptible power supply is considered one of the main elements, without which the device simply will not work. When installing the IPB in a residential building, you need to select sealed batteries. For a gas boiler, lead-acid batteries are best suited, which do not require subsequent maintenance and work accurately and very qualitatively.

What is a UPS for a gas boiler( video)

To keep the house warm and cozy, it is necessary to use an uninterruptible power supply for a gas boiler. It will protect the device from voltage surges and guarantee continuous operation when the power is cut off.