The principle of the pump station: a device with a hydraulic accumulator, an ejector, a tank for water supply of a dacha and a house, a cumulative

By installing a high-quality pump, you can be assured of the uninterrupted operation of the water supply. The efficiency of the water supply to the house will depend on the pumping station device. Today, the market offers two types of pumps: with a hydraulic accumulator and a storage tank. Each species has its own nuances that affect the operation of the pump.

How the pumping station works: 6 consecutive algorithms

The pump for water supply is a kind of unit, The entire house is flooded with water. The installation improves the efficiency of the water supply system in the house and the safety of the pipeline.

Having studied carefully the operating principle of the pump station and the instruction, it is possible to install the

equipment on its own. The pump operation algorithm:

1. The pump is switched on. At this time, there is a rise of water from the source;
2. Water gradually fills the system of the device and the hydraulic accumulator before reaching the limit value;
3. As soon as the maximum value is reached - the pump shuts down;
4. You take a shower, wash your hands in the sink, wash your face and drain the water accordingly. At this moment, the water level in the system decreases;
5. Water is flowing from the tank or accumulator;
6. The water pump turns on, and all operations are repeated anew.

This is how a water pump station works. The schematic diagram of connecting an autonomous pump with a built-in accumulator is not complicated. All this can be found in the instructions that come with the pump. The operating principle may differ from the model you have chosen. But the difference will be insignificant, because the basic principles in all pumping stations are the same.

Now you know how the pump works in the house. So now you can more responsibly approach the choice of pumping station in your house. If some part of the device breaks, you will know what is the possible cause of the failure. And if it is insignificant, you can fix it yourself.

What is included in the

pump station The private use water tower on a production scale often has pumping stations. But they are also used as a household component. This shows that pumps are widely used both for country purposes, and in larger scale production.

When choosing a pump station, it is better to give preference to already proven, well-known manufacturers( brands)

The pump station device consists of the basic functions that the unit must perform. The device includes the following components:

• Water intake - needed for water supply. It is in a well or a well. Equipped with a water intake fence for filtration. The grid stops large particles that can get into the pipeline together with water. In the same place is a non-return valve. It is in turn necessary to stop the reverse flow of water. This happens when the pressure drops or the pump stops working;
• Suction line. This is the area between the water intake and the pump;
• Pressure gauge with pressure switch. The centrifugal pressure pump discharges the pipeline, which gives water from the source. At this time, there is an intensive rise and pressure increases, which has critical indicators. The manometer and relay at this time optimize the operation of the pumping station. With their help, the device turns on or off, when the values ​​reach critical values;
• Pump station ejector;
• Reservoirs. Theirs them is the water in the pipeline.

Each element has its own functions and each element is important for a single functional operation of the system. Therefore it is important to buy proven and quality pumping stations. It is better to acquire known brands of stations. So you will protect yourself against forgery.

What you need to know about the principle of the pump station with the accumulator

The accumulator is a very useful thing in the pump. The very principle of operation of a pumping station with a hydraulic accumulator differs from a pump that does not contain it.

Thanks to pressure regulation, the pump with accumulator is considered more reliable

If you bought a pump station with a hydraulic accumulator, then you have new advantages for improving the water supply system. Among them, it is an opportunity to put a hydroaccumulator near the pump without changing the altitude. Such pumping stations have chambers with compressed air. This allows you to adjust the pressure that can rise while the pump is running.

The hydraulic accumulator allows you to supply water over your pipes more stably than a pump without it.

Setting the pressure level will affect the level of water that enters the pipes. Of course, this is a huge plus. In this case, you reduce the likelihood of a broken pipe in your home due to excess pressure.

If you have a choice, which pumping station to buy: with hydro- or without a hydraulic accumulator, then of course take the pump with a hydraulic accumulator. So you will protect yourself from premature broken pipes. It will help reduce pressure and prevent your pipes from bursting during the passage of water.

Than good pump station without accumulator

The pump station without a hydraulic accumulator is located in many suburban areas. Its main difference from pumps with a hydraulic accumulator is, as you correctly noted, the lack of a hydraulic accumulator.

The pump station with accumulator is inexpensive, but it has many drawbacks.

. If the pump does not have it, it most likely works with a storage tank. This is the second type of pumping stations. This is an old construction, but it is still used in summer cottages. The amount of water in the tank can be estimated from the float, which is put in the tank. When the water volume has decreased to the limit values, the sensor is triggered at this moment. At this moment, he sends a signal to start pumping water.

The storage tank is very large, so it uses less and less.

Among the minuses of the system can be identified:

• Low water pressure;
• Large tank sizes;
• Installation difficulty;
• The storage tank must be installed above the pump level;
• If a sensor breaks that indicates an overflow, water can flood the house.

The main advantage of this pump is its low cost. The accumulator is not cheap, so without it you can save money.

Pump station without accumulator with storage tank is the last century. Summer residents do not recommend buying it, if there is an opportunity to buy a pump with a hydraulic accumulator. Despite the low cost of such pumps, you risk flooding your house with water. Therefore, it is better not to purchase such pumps.

How the pumping station works for a dacha( video)

The pumping station today is a stable water supply for your home. People are always looking for comfort, and purchasing a pump is a great way to constantly have water in your home. Now you have learned how the pump works and you know what is better to buy in the market. Good luck in buying and good water pressure!