Installation of luminaires in the suspended ceiling: installation of lighting, pinpointing how to fix, how to make the backlight, video

selection and installation of lighting at a tension coating will not cause difficulties importance of lighting the space can not be underestimated. The correct light can hide shortcomings, it is advantageous to emphasize the advantages of the room. And, conversely, with a problem light, not only the beautiful interior looks unattractive, but the appearance of the tenants of the house is distorted towards the unhealthy kind. Examples of such influence can serve as fitting rooms in clothing stores with different lighting.

addition to aesthetic and visual component of the light quality in the roomAffects the psychological and physical health criteria.

Which fixtures can be installed in the suspended ceiling

The rooms in the house are designed for some functions and fulfill their roles. Based on these roles, the standards of illumination for each functional meter of the room were developed. Depending on the international recommendations, the square of the room, the power of the lamps, you can determine which lights to install in the house so that lighting is beneficial. The choice of fixtures is also influenced by the type of ceiling coating. Stretch ceiling, for example, has its own operational features, which somewhat limit the owners in choosing lighting equipment.

Constraints concern:

1. bulbs Capacity( 40 wadded lamp does not damage the PVC film);
2. Forms of light engineering( from round to square shapes, but taking into account fastening, which should not damage the tension base);
3. Failure to repair electrical wiring or install additional lighting if the ceilings are equipped with a tension system.

For ceiling structures, spotlights are most suitable, but there are other options for selection.

For rooms with high humidity the best solution would be to put the incandescent

under ceilings can be used:

• LED lamps;
• Halogen;
• Bulb;
• Fluorescent;
• Spot.

LEDs are the most expensive, but at the same time with maximum energy-saving efficiency and a long period of operation. Installation of halogen lighting technology allows you to make directional bright light at low power.

And the advantage of fluorescent lamps is good light output, low cost and the ability not to heat up.

Kinds of fixtures:

1. Decoration;
2. Spot;
3. Suspended.

Several alternatives, how to install a luminaire on a stretch ceiling.

Before fixing a polyvinyl chloride or fabric fabric to the ceiling, you should definitely decide on the layout of the lighting technique.

The mounting of lighting technology is possible in two ways:

• Overhead;
• Built-in on the ceiling itself.

for embedded spotlights picked up the designs with the ideas of design ceiling coverings such kind of lighting

Surface method makes it possible to install lighting on the surface tension of the film, and you can hang any type of lamps. To fix lighting equipment with the built-in method it is necessary directly to the ceiling.

Integrated installation method is more popular because:

1. has a number of visual benefits;
2. Creates tightness for lighting technology.

Mounting fixtures to a tension ceiling

Information is required about the dimensions, mounting features and details of the luminaire that was chosen for installation on the suspended ceiling.

Mount lighting technology is possible due to:

• hook;
• Special straps;
• Cross-shaped plates.

Installation of lighting on the hook - the easiest and best way but would prefer just hanging chandeliers

builders themselves set the hook and the mounting pad of the supply of electricity in buildings with reinforced concrete slabs. If the original location of the hook does not coincide with the plans for lighting the room, it can be inserted in the right place with your own hands. For this, a hole is drilled in the ceiling plate by means of a perforator and a hook is installed using a dowel or a special anchor.

You can install the hook using a wooden bookmark that is attached to the ceiling, and the hook itself to the tab.

The height of the hook, as well as the indentation from the ceiling to the tensioning structure, must be known in advance in order to correctly adjust the wiring. On the finished belt, the thermo-ring is fixed, where the hook ends, to which the suspension light is suspended.

The luminaires, which are equipped with a special mounting plate( metal profile with studs), can also be used with stretched ceiling systems. In this case, a beam is installed on the ceiling, the height of which in the end will be less than the distance from the ceiling to the tension film for a couple of millimeters. The plate is attached to the beam, and the lamp itself after tensioning the tensioning structure - as in the case with the hook.

The cross-shaped plate is installed in the same way as the metal bar. With the difference that on the PVC film 5 holes are made with a fuser( four of them for fastening the plate, the fifth for the chandelier itself).

Easy installation spotlights in the suspended ceiling structure

Due spotlights excluded damage film tensioning system from temperature effects. Suspensions, which are accessories of fixtures, help to easily establish this kind of lighting at home. The abundance of accessible training video allows you to familiarize yourself with the stages of fastening.

installation kit consists of a point light:

1. Feet rack;
2. Racks of the lamp itself;
3. Protector ring;
4. Thermal ring;
5. Directly of the luminaire.

Locate spotlights with a wide variety of combinations. This can be a main light in the room, and an additional functional or

main assembling steps spotlight:

• ceiling covering is prepared. For this, necessary electrical communications are carried out. At this time, the future skeleton for the tension system can be mounted.
• The ceiling is marked for future lighting fixtures. For this purpose preliminary ideas are worked out, the main and auxiliary light is compositionally composed.
• With a special foot, the internal structure is fixed to the ceiling.
• The rack displays communications.
• The tread ring is put on the stand.
• The operational status of the communications is checked.( It is worthwhile to connect the wiring for all the fixtures in a parallel way).
• The final installation of the tension system is carried out, the web is stretched.
• In the places of installation of the internal system of the luminaire on PVC linen, a protective thermal insulating ring is put on, which also serves as a fixative.
• The fabric is cut inside the fixing ring.
• Connect wires and install a luminaire.

How to highlight a stretch ceiling

Due to the design stretch ceiling system can be advantageous to use the space that is between the ceiling and the film, for additional illumination. To do this, enjoy the benefits of LED strip.

OFF, mainly light LED strip creates a special atmosphere languid

This type lamps is mounted:

1. to the ceiling;
2. To the frame profile of the tension structure.

Illumination plays the role of only auxiliary light, but it looks very impressive in modern premises.

There are color variants of such illumination.

The tape is attached to the frame in case it is enough to decorate the room around the perimeter. To create a pattern on the entire ceiling surface, the tape should be attached only to the ceiling.

Quick installation of lamps in suspended ceiling( video)

It should take care of the protection film in the places where the lights are mounted, select the appropriate lamps reliably and in time to make the installation of ground under the lighting equipment.