Aluminum glazing of balconies: profile for loggias, how to glaze with cold aluminum, video of concrete construction

You can perform aluminum glazing of balconies either independently or with the help of professionals. When looking at new buildings, the owners of the apartment, where the loggia glazing is not done, are thinking about the immediate installation of the profile, the insulation of the balcony room, the finish inside and out. In order to perform the installation yourself, you need to have the skills and know some of the nuances of the glazing of the balcony room, technology must be observed. This will be discussed below.

Aluminum balconies: the right choice of design

Cold glazing of balcony rooms of any typeIt is better to make azimer from aluminum profiles. Today, the market offers an abundance of high-quality aluminum alloy profiles. The main advantage of such designs is that the product has a low enough weight, if compared with other profiles. The service life of aluminum structures is 50 years or more. This is very important and should be taken into account when making an estimate of financial investments in order to glaze the balcony / loggia. The second advantage is that the construction is much cheaper than the PVC profile.

The design of the aluminum balcony should be chosen according to the general design of the room

To the above, you can add :

• Aesthetics;
• Fire resistance;
• Strength;
• Environmentally friendly.

The negative thermal moments of aluminum glazing include the high thermal conductivity of the material. By arranging a loggia / balcony, this nuance matters. Among professionals, the opinion was formed that aluminum structures are used when cold glazing is planned.

In order to compensate for the high thermal conductivity, the steel profile manufacturers produce structures with an air gap from the inside.

In order to better conserve heat, this cavity is filled with a special material. In addition to conventional glass, reliable double-glazed windows are put. Thanks to a simple calculation, it became clear that this approach to creating a profile brings aluminum structures to the leading positions in the market. The appearance on the market of a profile made of aluminum makes it possible to make a balcony glazing with removal.

Mounting technology makes it possible to arrange aluminum structures with removal and do not add a serious weight to the load on the balcony / loggia fence, since their mass is minimal. If the balcony room is small, it is better to arrange a sliding window opening system, this will save space. From aluminum guides, such a system, it is possible, to complete and install yourself.

Glazing of balconies with aluminum profile:

mounting sequence Before glazing aluminum balcony or balcony room, it is necessary to perform a competent assembly of building materials and fasteners. If the home master decides to do all the work on the construction of the structure himself, then it is necessary to perform a preliminary calculation of the glazing area. This indicator affects the type of profile that will be selected.

Aluminum profile can be painted in any color

In its functionality, aluminum frames from can be divided into 3 main types :

• Deaf;
• Reversible;
• Sliding.

The swing profile is the ideal solution for a wide, bulky balcony room. If the balcony is medium-sized or the loggia is narrow, it is better to give preference to the sliding mechanism. In order to ensure a highly efficient airing of the apartment, it is necessary to arrange 2 opening structures for 4 blind frames.

Cold glazing of the balcony with aluminum profile

If there are already wooden frames on the loggia, they should be carefully removed using a special tool. At the same time, the area of ​​the balcony room should be freed from any objects or objects. It is necessary to check the strength and reliability of the balcony plate without fail.

In old houses, a concrete or brick foundation may over the years lose its original reliability.

The old vertical surface must be reinforced with a metal strap. A structured metal frame must take on all the load from the glazed frames. Perhaps it's another way to go. Make a cement-sand base, by pouring. At the top of the parapet is arranged a small formwork. After the solution is poured, the surface must be leveled strictly horizontally. It is necessary to wait for the moment when the solution completely dries. Only then it is possible to continue the repair of the glazing.

In some cases, the parapet may be leveled, having strengthened the top of the timber. This option is well suited for glazing of loggias. Canopy is arranged from the top immediately after cleaning. It must be done before assembling the frames. The visor needs to be mounted irrespective of which glazing - cold or warm - is done on a particular balcony room. Thanks to this, rainwater will be drained from the double-glazed windows. Before starting the installation, it is necessary to remove the glazing from the frame. This is done in order to not break the glass during the fastening process.

As the canopy has already been made, the next step is to strengthen the tide from below. The void that formed between the parapet and the ebb should be filled with a sealant. The next step is to attach the mounting plates to the aluminum profile. Mount it is necessary for building screws. The distance between the mounting plates should be about 7 cm. After this, the frame must be placed in the opening.

Before proceeding to the cold glazing of balconies with an aluminum profile, it is worth to look at the training video and get acquainted with the advice of specialists

Construction is necessary :

• Deliver;
• Secure with wood wedges;
• Align.

Alignment is a very important step and must be performed carefully and carefully. The frame must be leveled horizontally, vertically and in the plane of the balcony / loggia. This is done in order to identify places in vertical surfaces and ceiling where holes for fasteners will be drilled. Having strengthened the frame, it is necessary to once again verify its orientation in space. Vertical and horizontal deviations can not be more than 3 mm.

When the rigid structure is in place, it is necessary to mount blind and mobile frames.

The sliding doors must be simply removed and put back. When moving, the sash must be easy to open. If these conditions are not met, then the metalwork is skewed. We need to conduct an inspection and remake everything anew.

The final stage of installing the aluminum profile for balconies and loggias

At the final stage, it is necessary to fix all the cracks and empty places with the mounting foam. All the zones of frothing, both from the outside and from the inside, must be covered with plastic racks. After the finish is finished on the frames, you need to put the fittings.

This is also an important stage, we must do everything very carefully. All levers and handles should be checked and adjusted. The leafs on the guides should move apart well. For this, the elements must be well lubricated with engine oil.

Cold glazing of the balcony with aluminum profile( video)

In conclusion, we note that intending to glazel the balcony room yourself, it is necessary to decide what type of profile will be mounted. To this end, it is necessary to assess the strength of its balcony, its orientation toward the side of the sun or shadow and the condition of the residential building as a whole.