Stairway for the roof: how to make for work, aluminum by hand, drawings, from metal, on the hobby for repair, photo with a hook

The staircase for the roof is a necessary and indispensable thing The roof ladder is a necessary and indispensable thing Satellite antennas are not uncommon, and they are installed on the roof of private houses. The staircase, built on the roof, not only protects you and your loved ones from an accident, but also serves for convenience, protects the roof of the house from damage. Walking on the top of the house and improper handling of tools can push the ceiling. After rotten or damaged shelter becomes the cause of leaking during the rainy season and the melting of snow.

        • How to make a ladder for roofing and what you need
        • The ladder with your own hands: drawings and diagrams
        • Economical option: the roof ladder
        • Choose the minimum weight: aluminum ladders
        • What should be the ladder for the roof of the metal roof
        • How to install the roof ladder( video)
        • Ladder nAnd the roof of the house with your own hands( photo options)

Private house roof ladder

There are many different types of this necessary accessory for repair and in the home. Often the stairs are made of steel, aluminum and wooden boards. And from the blanks you can assemble a ready-made structure for the building.

However, most often the following ladders are used for the roof:

  • Attic( attic or roof);
  • Wall-mounted to climb from the ground to the roof;
  • Pitched;
  • Wrecked;
  • For gable roof.

Stairs to the roof of a private sector house are of several types There are several types of roofs for the roof of a private sector house.

Note that between the edge of the eaves and the top step should be less than ten centimeters. From the stairs to the wall you need a distance of more than 20cm.

Wall staircases are also called façade. Where the front staircase ends, there must necessarily be a handrail with a good anchorage. The upper step should be at the height of the roofing ledge. The distance from the vertical ladder to the window sill should be more than 1m.

The ladder on the roof ridge with your own hands: what you need to take into account

The fin of any roof can be made of the same materials as the roof. A roofing horse is also called a ridge bar, there are many different profiles that will suit you. What design do you need?

The connector can be of any kind:

  • Figured shape;
  • Corner;
  • Semicircular;
  • Conical.

The stairway to the ridge is easy enough to make by yourself The staircase to the roof ridge is easy enough to make by yourself

When building a roof, the height of the ridge needs to be determined first. This is useful in calculating the volume of building components and the purchase price. After the manufacture of the ridge, a hook must be made to attach the ladder to it.

Please note. This design must be properly secured to prevent injuries. It is necessary to reduce the probability of falling down to a minimum.

How to make a ladder for roof work and what is needed

The results of installation work with a roofing ladder should provide an aesthetic appearance. The construction is fixed by brackets. They will pass through special holes. You must create a reliable waterproofing in the attachment points, and above all, ensure the safety of being at the top.

In order to make a ladder for the roof, you need bars, boards and screws In order to make a ladder for a roof, you need bars, boards and screws

For work you will need the following:

  • Self-tapping screws;
  • Bars with a cross-section of 40 × 40mm;
  • Flat wooden boards with a cross-section of 16 × 2.5mm.

The horizontal part of the steps is created from the bars. Thin stairs cause foot fatigue, and this must be borne in mind.

Ladder with own hands: drawings and diagrams

Any roof needs to be serviced with time, carry out various types of repairs. And therefore without special means you can not do. After all, it is necessary not just to move on the roof, but also to keep balance, to carry cargoes. Therefore, the safety of work at the height here above all else. Need a rope and a self-made ladder, which will be attached to it.

The ladder should be a reliable construction, therefore it is necessary to strictly calculate and draw a drawing The ladder must be a reliable construction, therefore it is necessary to strictly calculate and draw the drawing

Finished ladders have drawbacks. First, they have a high cost, even if it's cheap China. And secondly, a ladder can not fit into the frequency of the waves, and this will harm both the stairs and the roof. Sometimes the dimensions and characteristics of stairs in building supermarkets do not match the existing roofing material.

It is not difficult to find the required drawings with the chosen scale for the dimensions of the structure. The main thing is to correctly perform all calculations and correctly mount the ladder. The drawing of the house must indicate its location. You must do everything correctly and design and install the design correctly.

Economical variant: the roof ladder

Many private houses have a wooden staircase on gable roofs. Wood is much simpler and more convenient than a metal profile that is popular. It is also necessary to take into account the fragility of roofing materials. And this means that it is desirable to take boards with a large width.

Economical version of the staircase for the roof, made by own hands Economical version of the staircase for the roof, made by yourself

You will need:

  • Boards and bars of different lengths;
  • Long self-tapping screws;
  • Building tools.

We choose the minimum weight: aluminum ladders

Different building accessories from aluminum today are popular. Because it is considered convenient to use, light and durable material. In GOSTs and SNiPs much attention is paid to building safety and preventing slipping down, repair technologies.

Aluminum roof ladders are very popular Aluminum roof ladders are very popular

In aluminum roof ladders, the crossbeams must be curved to ensure that the lift is safe. And you can install a metal structure under a variety of angles. In such stairs, the most qualitative and tested material is used.

What should be a ladder for a roof of metal roofing

If you need to make a ladder of metal, take two poles 50 × 50mm and a length of 6 meters. You will need thin boards as steps. Use light and dry material. The steps are fixed using self-tapping screws. The staircase will be completed in any case, since putting it in this form is risky.

The steps of the ladder for the roof of metal should be affixed using screws The steps of the ladder for the roof of the metal should be affixed using the

. For a ladder of 6 meters, you must make 10 to 12 bars. They must be wrapped with foam( soft material) or penofol.

How to install the roof ladder( video)

The bars are attached to the ladder using self-tapping screws. The width of the ladder should correspond to the distance between the two poles. Bruski around the edges must be rounded with a plane. If you have a double-skinned roof, then a hook will be useful for fixing the moveable ladder.

ladder to the roof of the house with his own hands( photo options)