Sticky wallpapering with your own hands: how with your own hands, video, sticker on the wall, pasting walls, how to re-paste

click fraud protection

Sealing a room with wallpaper - it Sealing a room with wallpaper - it's not complicated, but it requires certain skills and rules One of the main components of repair is the wallpapering. This seemingly easy task can greatly impair the mood, if you do not know how to properly glue the wallpaper. On all the subtleties of wallpapering yourself, read on.

Contents:
    • How to paste the wallpaper itself: step by step guide
    • How to prepare a wall for wallpapering: putty yourself
    • Wall plastering: correctly qualitatively
    • Wall primer: why and why
    • Calculation of the number:
    • Wall sticker with your own hands: from words to the case
    • How to properly glue the wallpaper with your own hands( video)

Adhesive wallpaper is quite a troublesome business thatHe spends a lot of time, energy and money. Not always people have the opportunity to pay for professional wallpapering, in this case it is worth reading how to glue the wallpaper itself. In gluing wallpaper there are a lot of nuances that are very important to consider. Any trifle plays an important role, absolutely everything needs to be taken into account.

How to paste wallpaper yourself: step by step guide

For a woman to glue wallpaper is a troublesome task. If a girl does this for the first time, it's stress. For high-quality wallpapering with your own hands, you must strictly follow the instructions.

Adhesive wallpaper must go through several stages:

  1. The first stage - preparing the wall for wallpaper, putty;
  2. The second stage is the priming of the wall;
  3. The third stage - the calculation of the optimal number of wallpapers;
  4. The fourth stage - wallpaper gluing.

As you can see, to properly paste the wallpaper you need to observe four stages. Ignoring any of them can lead to "Sisyphean labor".The wallpaper will fall off, will be glued unevenly, go bubbles.
It is important to choose the type of wallpaper that will please the eye. There are several types of wallpaper: paper, vinyl, non-woven, wallpaper for paint. Depending on the type of wallpaper, the method of gluing is chosen, but this is a little later. In the meantime, it makes sense to disassemble the first three stages in detail.

Nowadays, you can choose wallpaper for every taste and purse, but without observing the technology results can disappoint Nowadays, you can choose wallpaper for every taste and purse, but without the technology, the results can disappoint

How to prepare a wall for wallpapering: putty yourself

Aligning the wall with putty is necessary in order to wallpaperGlued to a perfectly flat surface. So they will look beautiful on the wall, hold tight. The stage of putty should not be ignored, it must be approached as carefully and responsibly as possible.

In the process of puttying, walls are freed from old wallpaper, soot, grease, dirt and other unnecessary elements.

The first step on the road to leveling the wall is priming. It can be applied with a special roller, not missing, to cover the entire wall with one layer. When the coating dries, proceed directly to the putty.

Remove old wallpaper before gluing new ones - a prerequisite for the preparatory stage Remove old wallpaper before gluing new ones - a prerequisite for the preparation stage

The puttying of the wall is carried out in two stages:

  1. Start putty;
  2. Finishing putty.

What is the initial putty?Manufacturers call it the starting putty. It is necessary in the event that the walls in deep cracks, they have many holes and holes, there are large differences. One layer of initial putty should not exceed one and a half centimeters.

If the wall requires several layers of putty, it is applied through a paint net. So the layers will be strong, smooth, the surface will be smooth.

Starting putty should pay a lot of attention and try to achieve the most flat surface without defects, irregularities, etc. Once the initial puttying is completed, you can proceed to the final.
Finishing or final putty is designed to remove small defects from the wall. To detect them, professionals use a special light to detect the smallest flaws in the wall. For the final putty it is required to purchase a special finishing filler.

With the help of the finish putty the ideal surface of the walls is reached The ideal surface of the walls is achieved with the finishing putty

Wall plastering: correctly qualitatively

Putting the putty on the wall should be correct, according to all the rules.

There are some simple tips on how to apply the putty to the wall, being unprofessional:

  1. Application of the starting putty is carried out with a large spatula. It should be kept under a slight slope, applying shpaklevku small portions and moving diagonally, overlap. Use a corner trowel to handle the corners.
  2. After the puttying has dried( after 24 hours) it is necessary to proceed to the final puttying. To do this, take a small and large spatula, and apply in medium proportions an equal layer, not exceeding two millimeters.
  3. Before applying another layer, the primer already applied must be applied.
  4. After drying the last layer of putty, the wall should be sanded with sandpaper.

In order to achieve a perfectly flat wall surface, it is necessary to equip with high-quality tools In order to achieve a perfectly flat wall surface, it is necessary to arm with quality tools

For those who want to use thick wallpaper, two layers of puttying will suffice. For gluing of thin wall-paper three layers are required, that defects did not spoil a kind of wall-paper.

Wall priming: why and why

Wall priming is the final chord in the wall alignment under the wallpaper. Many ignore this stage, and then complain about the fragility of wallpaper, bubbles and other mucks. The fulfillment of this stage will protect you from troubles and defects that may affect the quality of wallpaper gluing.

The priming stage has undeniable advantages, among which:

  • Saving glue;
  • Prevent the spread of fungus and mold;
  • Dust removal from the wall surface;
  • Increased resistance to moisture at the walls.

These seemingly unimportant bonuses affect the longevity of the repair, its quality. For primer application, there are rules that must be taken into account for the correct implementation of this stage.

Primer is the connecting element between the wall and wallpaper Primer is the connecting element between the wall and the wallpaper

The first step is to prepare the grout by following the instructions. To mix the priming solution with water, you should use an electric drill with a special nozzle or make it by using a thick wire and any other electric tool. Apply the solution with a broad brush in even layers.

To owners of flat walls it is possible to use an ordinary paint roller.

In the instructions to the primer solution, the drying time of the solution will be written, it needs to be very clearly followed and no other layer should be applied until the first one dries. Then necessarily it is necessary to repeat a first coat, in order to guarantee the walls to the wallpaper.

Calculating the number of wallpapers: many do not mean good

Calculating the required number of wallpapers will save you from extra rolls at the end of the repair or from buying additional rolls in case of shortage. A careful attitude to this issue will prevent additional waste, an error in the color and design of the wallpaper, the problem of lack of space.

In order to make correct calculations it is necessary to calculate the area of ​​the walls. By measuring the length of adjacent walls and multiplying the resulting number by half, you get a perimeter.

After measuring the perimeter of the wall, you need to measure the height of the walls( ceiling).For example, if the height of the ceilings in the apartment is 3 meters, and the length of the usual roll is 10 meters, one roll will turn into 3 bands with a width of 50 centimeters each. To determine the number of rolls required per room, you need to divide the area of ​​the room by the sum of the width of the three rolls( 150 cm).

When performing all calculations for the necessary number of wallpapers, it is necessary to provide 1 additional roll When performing all calculations for the required number of wallpapers, it is necessary to provide 1 additional roll

In any case, the store provides professional assistance in counting the number of rolls, because the length and width of the roll depends on the design, manufacturer, Etc.

Sticker on the wall with your own hands: from words to deeds

Pasting the walls with wallpaper is a troublesome business, no one argues. But here the putty with the primer is made, the calculations are made, the rolls are bought. What actions go on. Then it is important to understand where to start. If we glue the wallpaper with our own hands, we carefully look at the origin of the pasting. This is not so important, but there is one strict rule: the first band must be perpendicular to the floor strictly. And, to use the angle, as a vertical landmark is prohibited. Landmark should go to the window and doorways. To paste the first strip should be directly parallel to the opening, where the sticker started.

Nowadays, when the wallpaper is not overlapped, but the butt-end, the initial point of pasting does not matter. You can start from both the window and the door. However, if you glue the wallpaper clockwise, you can not change direction.

The method of gluing depends on the type of wallpaper. If paper wallpaper is used, the edges are cut from them first, and the rolls are sorted by color.

Before gluing the wallpaper, you need to study the instruction on the roll Before wallpapering it is necessary to study the instruction on the roll

When the roll is cut, the pattern is corrected in parallel. Strips in length should be in accordance with the height of the room. The edge at the wallpaper goes on cutting. Thin paper wallpaper is glued with a cold liquid glue with a brush, after which the wallpaper is immediately glued to the wall. The wallpaper is smoothed out with a soft cloth to prevent bubbles in the wall. If the wallpaper is light, they are smoothed with a white sheet, put under a rag. Excess glue is removed with damp foam rubber, so as not to damage the wallpaper.

If the wallpaper is thick, they are covered with a warm glue with a double layer. To glue the wall with sockets and switches, you must first turn off the electricity. Especially carefully it is necessary to approach to cutting out a place for the socket or the switch, using special tools.

How to properly glue the wallpaper with your own hands( video)

It should be remembered that sticking the wallpaper on the old can not be categorically. This will lead to the fact that the new wallpaper will fall off together with the old ones. If you want to re-paste wallpaper, carefully follow all the rules and instructions. Then your work will not pass in vain. To wallpaper was easier to glue, take a friend or girlfriend in aide, their help can be very valuable and necessary.



instagram viewer