Today, more and more consumers are taking care that the finishing surfaces in non-residential premises are not only functional, but also bear an aesthetic load. That's why many people prefer to tile the surface with ceramic tiles. To make it better glued to the surface, many first produce a gypsum board installation. It has a flat surface, which ensures easy and high quality tile laying. Ceramic tiles on plasterboard in the bathroom fit simply, if you know the strict sequence of actions.
- Installation of tiles in the bathroom on plasterboard: surface advantages
- Plasterboard in the bathroom tile: which option to choose
- How to glue the tile in the bathroom on plasterboard: step-by-step actions
- Tile adhesive for gypsum boardIn the bathroom
- Laying the tiles on the plasterboard in the bathroom( video)
Laying the tiles in the bathroom on plasterboard: surface advantages
The bathroom tiling is often done with tiles. The laying process can be quite laborious if the surface of the walls has irregularities and swings. Previously, before laying the tiles, the surfaces were treated with plaster, sand or gypsum solutions.
Today, more and more masters prefer to lay tiles on directly installed sheets of gypsum board.
This kind of material allows you to perform the lining without excess dust and contaminants. At this time for laying the tile goes much less. Laying tiles on gypsum board has many advantages.
Advantages of stacking on GKL:
- Safety of material for health;
- High level of refractoriness;
- High thermal insulation properties;
In order for the surface to be strong and reliable, you must carefully consider the choice of material. Plasterboard sheets should be suitable for facing with ceramic tiles. For the bathroom, the best solution is to purchase a water-resistant GKL.
Drywall in bathroom tiles: which option to choose
The bathroom is subject to frequent changes in temperature. Despite the fact that today the laying of tiles on a plasterboard surface is quite common, many do not know what type of drywall should be preferred. The choice of material depends on the success of the entire repair.
Two types of gypsum fiber are suitable for tiling. However, each species has its own characteristics that affect the quality of the styling.
When choosing a drywall it is important to pay attention to the marking. Drywall in the bathroom should be selected with a note - GKLV.This means that a special hydrophobic impregnation was applied to the sheets.
Options for using drywall:
- Simple. In most cases, it is used to cover walls and ceilings in living quarters when repairing and zoning rooms.
- Hydrophobic. Gypsum board with impregnation, which does not allow water to deform the material.
Waterproof plasterboard - a reliable coating that allows you to perform high-quality cladding with ceramic tiles. With this material, it is fashionable to be sure that the constant moisture and the effect of water will not render gypsum cardboard unfit for use, and, consequently, tile.
How to glue a tile in the bathroom on plasterboard: step-by-step actions
You can make the tiling of plasterboard yourself. To do this, you must first familiarize yourself with the instructions and the repair stages. Initially, the surface should be finished with plasterboard.
How to install gypsum boards, you can read on the Internet, on specialized sites.
. It is important to install the plasterboard slabs so that their surface is stable and strong, then the tile will hold tightly and reliably. It is best to use a grid and straps during the installation. The installed surface must be thoroughly primed and plastered.
Stepwise tile gluing:
- Apply glue to the area in m.
- Stick the tiles on the plasterboard.
- Several times hit the tile with a rubber mallet.
The tiling of the plasterboard is not noticed much time. In order to be sure of the reliability of the gluing, it is necessary to choose high-quality glue. From its kind will also depend on a strong connection of surfaces.
Adhesive for tiles on plasterboard in the bathroom
The choice of glue for gluing tiles to plasterboard can significantly affect the outcome of the repair work. It is important to note that not all types of glue are able to glue the tile to the plasterboard. That's why you need to look in advance for a suitable look.
The tiling of gypsum boards can be done with two types of glue. Purchase can be done in specialized stores or online.
Manufacturers offer ready-made and dry mixes that you need to prepare yourself. The choice of the manufacturer depends on personal preferences and the budget of repair. Make the preparation of the glue mixture according to the instructions on the packaging.
Kinds of glue:
To prepare an elastic adhesive, you need water and a dry mix. Cement glue can be used when working with paper surfaces. It is important to remember that the glue has the ability to quickly solidify, so do not prepare all the composition at once.
Laying tiles on plasterboard in the bathroom( video)
The bathroom is a room, the surface of which requires special finishing. It must be strong, reliable, resistant to moisture and temperature changes. That's why many people come to the decision to put tiles on the bathroom surface. It is best to put the tile on a moisture-resistant plasterboard. It has a flat surface that promotes reliable bonding of materials. Repair work should be carried out in strict sequence. Lay the tile after installing the slabs and carry out their primer and putty.