Lambrequins with their own hands: how to draw, step-by-step photo, curtains according to the instructions, French pin, video

If you have the skills of sewing, then making lambrequin for you is not difficult Lambruckens do not always hide the aesthetic cornice. Adding the scenery of the windows a complete look. There are two types of lambrequins: hard and soft. The first option can be used in a variety of interiors, it gives the window space elegance and refinement. Soft lambrequins look majestic and pompous, such products are more suitable for classic luxury interiors. Any of the described designs can be purchased in specialized stores, but if you want to get a truly original product, it is better to sew it yourself. How to do it - read on.

Cooking materials, before making lambrequin

The way to go to the sewing store for materials for your brand-new labressen, you need to decide what type of product you want to receive. After all, it depends on this factor which accessories will be useful to you.

There are two types of lambrequins: one is made on a rigid basis, and the other is made of fabric. The first option is to choose those who have a room is large enough. The second kind will suit you if you are the owner of an apartment with small rooms.

Soft lambrequins perfectly fit into classic interiors. They have falling frills and consist of a large number of different parts, which make these products quite massive.

Before assembling the lambrequin, it is necessary to prepare and think over all the details of the composition

Parts of which are composed of soft lambrequins:

1. Svagi is the main decorative part of lambrequin. They are semi-circular pieces of fabric that extend across the entire width of the product.
2. The is located between the semicircles of the svag. They are not present in all the lambrequins.
3. Jabot - long details located on the sides of the lambrequin. They hang over the side edges of the curtains.

These elements make the soft lambrequin a luxurious part of the classic interior. However, they also attach a cumbersome design.

Rigid lambrequins are made from several layers, which include dense base fabric, glutinous web, non-woven fabric and soft facial material. Such products are more versatile, as they are suitable for most interiors. They are cut out on a stencil and look refined.

If you decide to make a soft lambrequin, then you will need several pieces of fabric of different density and color. Density of the fabric should depend on the degree of illumination of the room. If your windows are on the sunny side, then it is better to choose the material more tightly, for more dark airy fabrics.

In addition to the fabric, you will need: scissors, threads, needles, pins, iron, pattern paper, centimeter, pencil, templates and sewing machine.

Such a necessary French pin: photo

French, they are also English, pins - this is a subject that every hostess should have. You ask: "Why do I need it if I do not do professional sewing?".

The fact is that such tools greatly facilitate the work associated with sewing. With their help, you can sew pants to your child or sew lambrequins with your own hands, without first marking the product.

A French safety pin is a needle with a protective ball at the end. This structure does not allow the device to jump out of the fabric at the most inopportune moment

Earlier, French pins were used not only for sewing. Such products, which have a head decorated with precious stones, were worn by beautiful ladies. Now such costume jewelry can be found extremely rarely, as modern clothes do not fit well with such decor.

In our case, a French safety pin is useful for creating a lambrequin. With its help, you can fasten all the parts of the product together, which will save you a lot of time, which for lack of such a tool, you would have to spend on detail marking.

How to make your own hands lambreken from soft fabric

Lambrequin made from soft fabric is much harder to make than its hard analog. Here you will need to make some calculations and make a correct pattern.

When sewing a lambrequin it is important to observe the width of each fold or the product will turn out to be sloppy

Step-by-step instruction for lambreken:

1. First of all, you will have to calculate the length of the lambrequin sections. You should know that each section overlaps the next section by 1/3.Thus, one section equals 3/3, you need to multiply this figure by the number of sections, and then subtract from the resulting value 1/3 multiplied by the number of sections. Then measure the length of the cornice and divide it by the value obtained earlier.
2. On a sheet of paper, draw a line that is equal to the width of the section. Attach the cord to the ends of this line and slightly, letting it in, determine the level of hanging of the svag. Draw a curved line along the contour of the cord, and draw from its middle a line perpendicular to the width line of the section. From the point on the curved line, lower the height of the allowances down, it is equal to 50-80% of the width of the section. Place the compass at the point dividing the width of the section in half and draw a line through the point of the height of the allowances. Divide the top line into three parts and from the new 2-3 points draw the lines to the drawn semicircle, with the ends of the new lines intersecting with the semicircle at the section width level.
3. Cut the required number of parts from the pattern. For example, 3. Bend the lower rounded part of each part 2 cm, insert a metal tape into the hem, press and sew. Fold all three sections, with the central section at 1/3 should go to the side sections. Stitch the upper edge of the lambrequins with an allowance of 1 cm. Tuck the upper edge of the structure by 2 cm and iron. Away from the top 1 cm, sew a curtain tape. Next, pull the cords of the curtain tape so that the side sections are 1/3 of their width. The central part should remain smooth.

This manual describes the creation of the simplest lambrequin. If desired, you can decorate the design with lace or add a toad to it. However, even without decorative elements, such a product looks very elegant.

Rigid lambrequin with curtains by one's own hands: step by step instruction for manufacturing

To create a hard lambrequin you do not have to build complicated patterns. You can draw a pattern yourself or print a ready-made drawing.

To make a hard lambrequin you need to know two parameters: the width of the eaves and the length of the bando. The last size is selected depending on the size of your window.

You like the pattern, it can be openwork, transferred to paper and cut with scissors or a paint knife. Then, according to the obtained pattern, two mirror pieces from the front fabric and spider webs are cut out, and one of the non-woven and non-woven dense material. In this case, the pattern should be placed below the edge of the fabric for a distance equal to the diameter of the curtain section.

Hard lambrequin is much easier to make than in soft version

With a rigid openwork lambrequin, you can decorate not only curtains, but also tulle.

Next, you need to fold the parts in the following order: facial tissue, cobweb, lining, spiderweb, interlining, facial tissue. The received design is fixed by French pins and ironed by an iron.

Due to such components as glutinous web and non-woven fabric, the parts of lambriken are glued together under the influence of high temperature. After the elements of the bando glued together. The pins are removed and the construction is ironed again. The edges of the lambrequin are processed by the apparatus for burning through the fabric and velcro is sewn onto the upper part of the product.

How to make lambrequins with your own hands( video)

The production of lambrequin by yourself takes very little time. Having a good imagination and basic skills in sewing, you can easily cope with this work!

Examples: How do pelmet with their hands steps( photo ideas)