Gypsum boardboarding: repair and use, how to install, laying on the dacha with your own hands, how to do the installation

recommends the use of gypsum boards, in order to make the wall smooth and smooth Thanks gypsum boards can perfectly align the walls and ceiling inside. Now you do not need to buy additional funds to level the surface. Moreover, the use of gipsokartonnyh sheets provides a guarantee that the finish finish will be performed qualitatively and ideally. This option of wall lining in the room allows you to even out any irregularities, with various differences. As a rule, if the difference is up to 5 cm, then it is possible to sheathe the walls without the frame. If the figures are higher than 5 cm, then it is necessary to install a special frame for laying gypsum boards.

Tools for laying drywall when repairing

A professional specialist can also perform the work. But if there is a desire, you can always learn to put the GKL yourself in the apartment or at the dacha. It is enough to take into account all the recommendations and advice of a qualified master. First of all, you need to prepare the necessary materials and tools for working with drywall sheets.

commencing repair work necessary to be a complete set of tools and materials that may be needed during

Tools and materials:

• GCR conventional, water-resistant or refractory, laminated or purple. It all depends on the room where the work will be done.
• Special metal profiles;
• Wooden bars;Dowels and pendants;
• ;
• Bulgarian;
• Drill;
• Screwdriver;
• Shears for metal;
• Self-tapping screws;
• A simple pencil or marker;
• Leveling level;
• Tape reinforcing;

Once all the tools have been prepared, you can start working. In this there is nothing complicated, it is not necessary to have professional knowledge and skills to cover the walls of the GCR independently.

Useful tips for applying drywall cladding

work with gypsum boards quickly and easily. Experts recommend to approach the facing with responsibility, so you do not have to call a specialist and do everything. Gypsum boardboarding significantly speeds up repair in the room.

In order to quickly and accurately lining the walls of plasterboard, it is better to seek help from professionals

EXPERT ADVICE:

1. Firstly, work better with a partner. Gypsum boards are very large. It will be inconvenient to perform the assembly yourself.
2. Secondly, to tighten the screws, it is better to use a special repair tool - a screwdriver. It has limitations as to the depth of screwing in the screw. Therefore, you can not overdo it.
3. In addition, if the walls are covered with plasterboard inside a wooden house, then all the details should be treated with an antiseptic. Especially those that remain under the sheets of drywall.
4. If there is high humidity in the room, then the appropriate class of drywall is recommended. As a rule, such a restoration material looks a little greenish in appearance.

To work does not require special equipment, and after installation is not much construction waste as after a normal repair.

How to put plasterboard on the frame

There are two methods of wall plastering with gypsum boards. The first is a wireframe installation. The second one is frameless, when the installation of plates is carried out with the help of special glue. But this option provides for some limitations in the work. For example, the height of the wall should be the same as that of the drywall sheet. This is necessary to get the most smooth interfaces. In addition, it is necessary to prepare the surface for work so that it is as flat as possible.

The mandatory step is to mount the frame from the metal profile

The most common method is the frame method of wall plastering with gypsum board.

This method is practical and popular, so it can be used to sew walls by yourself. It provides its advantages and dignity, for which it is chosen. In this way, you can even trim the stairs in the house to create an original interior decoration.

Advantages:

• Work is relatively fast and easy;
• Frame wall covering allows you to hide any disadvantages of the surface, regardless of size and condition;
• You can hide any communication systems under drywall sheets;
• This method of cladding makes the room most attractive.

The frame can be made of wood or from a metal profile. It is necessary to think carefully about how to make a frame under the plasterboard planking. It is the defining final work. Specialists recommend using a metal profile to create a frame base.

Step-by-step laying of drywall

Before proceeding with installation, it is necessary to determine the method of skinning. Frame is in demand due to the fact that it hides communication systems and can be installed on any uneven surface. You can use this method of plating in the kitchen and bathroom, as there is an opportunity to immediately lay the tile. Among the shortcomings can be noted the complexity, high cost and the need for a large room.

The choice of the method of skinning depends on the surface quality

By following the instructions correctly and carefully, it is possible to quickly and easily complete all repairs that are associated with the

gypsum board. The frameless skinning method is inexpensive and fast, saving space. But for the wall, even with minor defects is not suitable. In addition, the tile, soundproofing or insulation material can not be used together with this method.

Stages of operation:

1. Using the building level, it is necessary to mark the places where horizontal profiles for gypsum boards will be installed. Markups should be checked several times, exact data is needed.
2. Install the central racking profiles, observing the distance of 40 - 50 cm. To the wall they are fixed with special supports made of metal with a distance of 60 cm.
3. The empty space of the frame can be filled with a heater. Especially it is necessary if the walls are made from the outside of the house.
4. For cutting sheets use a stationery and construction knife. First, markings are applied, then a knife is used.
5. Install gipsokartonny sheet, and fix it with screws to the profile. That the ledge always looked outward. Carefully and accurately, do not be too zealous, otherwise you will have to additionally screw in the screws in another place.
6. The final stage of work is the sealing of seams. A special putty, reinforcing tape, spatula and small trowel are used.

Specialists recommend carefully and carefully seal the seams so that the surface is as smooth as possible. After processing, it should be ground with a special grater or ordinary sandpaper. It is compulsory to treat the entire surface of the GKL with the finishing putty.

Plasterboard plasterboard examples( video)

Drywall lining does not present certain difficulties. Everything is easy and simple. This budgetary version of the decoration of the walls allows you to create the most flat surface. Using gipsokartonnye sheets for wall sheathing, you can create the most original design solutions. Cardinally change the room. It's enough just to be patient and show your imagination. If you follow all the helpful recommendations correctly, the result will definitely please, especially if everything is done by yourself.