The ceiling in the garage: what to trim, photo than to finish, height, own hands than paint, what to make, of corrugated board in metal than is better

click fraud protection

To finish the ceiling in the garage is better to use plywood or PVC panels For finishing the ceiling in the garage, it is better to use plywood or PVC panels What is the best way to trim the ceiling in the garage?For finishing the ceiling with your own hands, it is recommended to use plywood or PVC panels. These materials are relatively inexpensive and easy to care for. Remember that the quality of the finish of the ceiling will depend on the safety of your vehicle. That's why carry out the installation strictly according to the instructions.

      • How can I fix the ceiling in the garage
      • What should be the ceiling height in the garage
      • We insulate the ceiling in the garage with our own hands
      • How can I paint the ceiling in the garage
      • What else can I make the ceiling inGarage
      • Decorating the ceiling in the garage with plastic panels( video)

Than it is possible to sew the ceiling in the garage

How to sew the ceiling in the garage?You can trim the ceiling with plywood. This material is universal and easy. In addition, plywood is an organic material. Before you start, you need to choose the right kind of plywood. It is recommended to give preference to materials with high moisture resistance. They add special melamine resins.

Finishing the ceiling with plywood begins with the cleaning of the ceiling. You need to clean the surface of the wallpaper and paint residues. If there are irregularities on the ceiling, remove them with a sealant or putty mixture.

Decoration of the ceiling in the garage can be done with the help of plywood, before cleaning the ceiling and eliminating unevenness You can finish the ceiling in the garage with plywood, before cleaning the ceiling and removing any unevenness.

The ceiling plywood is piled in this order:

  1. Install the wooden crate. Attach it to the ceiling with self-tapping screws.
  2. Attach the plywood sheet to the frame.
  3. Align the blade and fix it with screws.
  4. Remove the cracks between the ceiling and the walls using a wooden skirting board. If desired, you can apply to the joints of the putty.

What should be the ceiling height in the garage

According to the SNIP, the ceiling height in the garage must be at least 2 meters. However, in order to feel comfortable in the garage, you need to raise the ceiling a little. If you plan to cover the ceiling with plywood, then the height of the room should be at least 2.5 meters.

When calculating the optimum ceiling height, it is necessary to take into account:

  • Vehicle height.
  • Free height margin. Usually takes 200-300 millimeters. A place for lighting fixtures.
  • .
  • Height of automatic gate elements.

If you use a sectional door, the optimum ceiling height is 2300 millimeters. In the case where you have an SUV, the height of the room should be at least 2700 millimeters.

The height of the ceiling in the garage depends on the height of the car, the place for placing lighting devices and the height of the elements of the automatic gate. The height of the ceiling in the garage depends on the height of the car, the space for the lighting fixtures and the height of the automatic gate elements.

Storage of a boat in a metal garage provides for an increase in the ceiling height. In addition, you need to clean the boat from sand and dirt. After that, it needs to be washed with warm water and thoroughly dried. Remember that the inflatable boat should not be close to the heating devices.

We insulate the ceiling in the garage with our own hands

Many people notice that the ceiling in the garage "cries".Why is this happening?Experts argue that the overlap sweats due to the fact that condensation forms on the surface. Correctly made insulation will help to get rid of this problem.

You can make the insulation in the garage using:

  1. Mineral wool.
  2. Glass wool.
  3. Polyfoam.

If you have a metal ceiling in the garage, then it is desirable to use foil materials. You can fix them with a stapler or glue. It is desirable to attach the foil materials to the frame of corrugated board.

Implement the thermal insulation of the ceiling in the garage can be using foam, glass wool or mineral wool The insulation of the ceiling in the garage can be carried out with the help of polystyrene, glass wool or mineral wool

Ceiling finish with foam:

  • Apply glue to the material.
  • After this, attach the material to the ceiling.
  • Fix the foam with dowels.
  • Remove the cracks in the joint between the ceiling and the wall. Fill gaps with foam.
  • Finish the ceiling with plaster.

If you decide to use mineral wool or fiberglass as a heater, you need to lay the material between the profiles. After that, you need to trim the ceiling with PVC panels.

Than it is possible to paint a ceiling in garage

To paint a ceiling in garage it is possible a water-emulsion paint. This material is stable and practical. Remember that it is not recommended to apply water-based paint to the wet ceiling.

Before starting work, it is necessary to clean the surface of the ceiling from dirt and debris of finishing materials. This can be done with a construction spatula. In addition, before applying the paint, it is recommended to vacuum the ceiling.

Pre-cleaning and leveling the ceiling in the garage it can be painted with water-based paint several times Preliminary cleaning and leveling the ceiling in the garage it can be painted with water-based paint several times

Ceiling painting is performed in 4 stages:

  1. Apply to the ceiling the plaster and putty.
  2. Then, with the help of a building level, try to level the ceiling.
  3. Apply a second layer of putty and a primer to the surface.
  4. Begin painting the ceiling. To do this, use a roller. Hard-to-reach places can be painted over with a brush. It is desirable to paint 2-3 layers.

From what else can you make the ceiling in the garage

For finishing the ceiling in the garage you can use gypsum cardboard and corrugated board. To install such a structure is very simple. Remember that it is recommended to use plasterboard 9.5 millimeters thick for carcass plating.

If there is high humidity in the garage, use moisture-resistant plasterboard for the plating, since it is not subject to deformation. This material is processed by a specialized staff. Moisture-resistant plasterboard has a greenish tinge.

Drywall and corrugated board are well suited for finishing the ceiling in the garage Gypsum board and corrugated board are well suited for ceiling finishing in the garage.

Assembly sequence:

  • Attach the guide rail. To fix the part it is desirable to use self-tapping screws or dowels.
  • Install the rack profiles and insert the guides into them.
  • Fix the suspensions. These parts will increase the rigidity of the structure.
  • Next, make slots in the gypsum board under the lighting fixtures.
  • Wrap the frame with plasterboard sheets. To fix the material, use self-tapping screws.
  • Attach a serpentine net to the joints of the fabric.
  • Apply to the ceiling putty.
  • Sand the surface with sandpaper.
  • Apply primer and paint to the surface.

Decorating the ceiling in the garage with plastic panels( video)

There are many ways to finish the ceiling in the garage. Each of them has its advantages and disadvantages. It is recommended to give preference to plasterboard or plywood for roofing. These materials are more practical than PVC panels. After the ceiling is covered, it is necessary to apply water-based paint to the surface. Alternatively, you can use acrylic paint. If you notice that the ceiling in the garage is wet, be sure to insulate the room. It is recommended to use foam or mineral wool as a heat-insulating material.



instagram viewer