Greenhouse with their own hands made of plastic pipes: greenhouse made of polycarbonate, plastic drawing, photos and video

Greenhouses made of plastic pipes can be made on their own or buy ready-made From the side it may seem that the greenhouse with its own hands of plastic pipes can be built only by builders with extensive experience. In fact, everything is much prose Analysis of existing needs, a correctly drawn up drawing, the right selection of building materials - all of the above lies at the basis of a reliable design in all respects.

The more attractive the plastic hothouse

From the side it may seem that the plastic can be attributed with great stretch to the durable materials. Experience shows that everything depends on the quality of the work done. It is about the need to analyze the characteristics of the soil.

If the groundwater approaches too close to the surface, the foundation must be made of bricks. Depending on the weight of the building, masonry is applied in 1 or 3 layers.

Among the advantages of plastic greenhouses, it should be noted a small price and excellent performance

Less difficulties to overcome those gardeners whose plots are burdened with underground sources of moisture. In this case a greenhouse made of polycarbonate can be made on the basis of a wooden base.

In terms of plastic construction in general, they have gained popularity due to the following advantages:

• The relatively small weight of plastic pipes reduces the total weight of the structure;
• Speed ​​of assembly and unpretentiousness in service;
• Ability to select any desired shape( width, height and length);
• Strengthening strength is achieved through the use of metal fittings.

Lightweight yet robust construction quickly gained popularity among gardeners. It can even cope with its installation, which speeds up the editing process. In addition, it is possible to increase the carrying capacity of the greenhouse to any desired extent.

We build a greenhouse with our own hands made of plastic pipes: drawing

Despite the apparent complexity, the project research can even be done by novice gardeners. Before you grab the pencil and paper, you need to ask yourself an almost existential question. What is a greenhouse for?Which crops are planned to grow?How often will the design be used?Simply put, a summer resident should approach the consideration of the feasibility of construction from various angles.

The replies received are made in writing. Based on the collected material, the so-called technical task is formed. This is a list of requirements that a greenhouse must meet.

Before manufacturing a plastic greenhouse it is necessary to execute its drawing

They look like this:

• The tree or brick for the foundation is chosen taking into account the planned width and height of the structure;
• Take into account the characteristics of the soil, for example, if it is too soft, a deep foundation is made;
• If the drawing takes into account all the above requirements, the horticulturist can fully enjoy the work in the greenhouse.

Beginners should remember that the value of the drawing lies in its informativeness, not the aesthetic component. It does not matter how well a person knows the skills of drawing. It is necessary to pay more attention to indicating all significant design parameters. In this case, you can build a hotbed with your own hands in a few hours.

We assemble the greenhouse framework from plastic pipes with our own hands

Having dealt with the floor, you can go to the walls. As it was said, it is necessary to push off from operating conditions.

Gusty wind, year-round use, a large amount of internal space - all this indicates the need for plastic.

Thanks to the hollow structure, the finished frame is easy enough while maintaining overall strength. Before starting work, it is necessary to visually inspect each part for even minor deformations.

The plastic pipe hull is excellent for growing plant crops in the country house

If not found, the transition to the practical part is carried out:

• Homemade plastic parts are bent so that the arches are made;
• The minimum interval between them is 75-80 cm, and in some cases 1 m;
• After this, the film and the base of the pipes on the "frame" must be bolted;
• We do this solely with the use of non-sharp fixatives, otherwise it is easy to damage the film;
• To avoid breaking the integrity of the film, it helps to cut even the minor sharp protrusions that are present in the plastic pipes.

Increased level of strength with a low overall weight is made by plastic pipe hobs in demand. At the stage of assembly, you need to make sure there are no sharp angles and a tight fit of each element. Only in this case, the minimum period of operation of the building will be 5-7 years.

Differences of greenhouses from polyethylene pipes

Gardeners without enough experience often confuse two, they think, identical options. In fact, there are a number of technical differences between them. To begin with, it is necessary to understand that plastic pipes have the ability to interact with metal reinforcement, and polyethylene pipes do not.

In addition, attention should be paid to a number of other functional differences between the two pipe types:

• The surface is more susceptible to the negative effects of external factors;
• The material is environmentally safe;
• The process of manufacturing polyethylene structures is characterized by less time and effort.

Materials for the manufacture of plastic greenhouses are sold in any construction shop

From the above characteristics it is easy to understand that the use of polyethylene pipes is allowed only in budgetary versions of greenhouses. The material does not allow the installation of additional equipment to monitor the air and soil conditions, not to mention additional sources of light and water. As a rule, heating in a structure of polyethylene pipes is carried out by a point method - a heat gun.

Smart greenhouse made of plastic pipes

If you have sufficient financial resources, you can personally install a greenhouse equipped with a system of round-the-clock monitoring. Depending on the manufacturer, such a gadget can simply inform about changes in the specified parameters or independently interfere with what is happening.

In order to avoid any difficulties during the operational phase, it is necessary to think in advance:

• The use of metal-plastic components requires the amplification of individual points where
• sensors will be placed. The sensors transmit all information without wire technology or cable;
• If the second takes place, you must provide for their tracing in advance;
• Before starting operation, it is necessary to study the manufacturer's recommendations in terms of placement of sensors that record various indicators.

Innovative transformations in the agricultural sector have made the computer a part of the greenhouse. The 24/7 system monitors what is happening inside.

This is done thanks to numerous sensors, mounted on arcs and walls. In order for them to fully cope with the task, it is recommended that the pipe cross-section and the width of the fixing beams be provided in advance.

We finish the greenhouse of plastic pipes and polycarbonate with our own hands

The closer the final point of all the work done, the more attention should be paid to measuring all the elements of the design. For this, the building level is used. It is advisable to proceed to the next stage only after checking the correctness of the previous one. Otherwise, you will have to shift all previously installed polymer parts.

The greenhouse made of plastic pipes can be finished with film or polycarbonate

Often, errors occur during the installation of the input group and windows.

The following tips of summer residents with the experience will help to avoid all kinds of skews:

1. Door installation is the most difficult stage, because it is necessary to achieve the perfect alignment of the opening and the box. It is useful for beginners to know that even an ideally installed door requires correction in the course of time. We carry out a similar procedure with the appearance of even an insignificant thrust.
2. Pins should close as tightly as possible, otherwise small, at first glance, drafts, violate the natural temperature regime.
3. When placing sensors, avoid plastic elements that are not very robust.

Greenhouse from plastic pipes with own hands( video)

The use of plastic for making greenhouses has become popular due to the characteristics of this material. Strength, durability, low weight and low cost - all these characteristics allow the construction of a greenhouse of any complexity in a short time. The main thing is to take into account all technical nuances at the stage of drawing development.

Examples greenhouses of plastic pipes with their hands( photo)