The furnace for the greenhouse: long-term burning with their own hands, on wood for heating, made of polycarbonate and brick, provide watering

Many summer residents want to grow their fruits not only in the summer, but also during the winter weather. Therefore, they buy a furnace for heating the greenhouse. Summer residents advise them to their neighbors in the site and friends. Those who want to enjoy vegetables from their beds at any time of the year. To heat a greenhouse or greenhouse in the cold season, you must use the furnace for the greenhouse. Otherwise, your vegetables that you grow with such care will simply die. The purpose of a greenhouse stove is to heat the interior of a greenhouse or greenhouse during cold weather. Oven heating today is used by many summer residents in their greenhouses. The presence of a furnace with a heat exchanger is especially important for warm irrigation and efficient cultivation in greenhouses.

What is a stove for a greenhouse on the market

There are different models of heating stoves on the market today. They differ both in design and in the fuel used in the furnace. Some work with electricity, others with gas or solid fuel.

You can purchase both a ready-made oven and make a do-it-yourself oven. Of course, making the furnace for heating yourself will be much cheaper. But do not forget that the polycarbonate greenhouse is not your home, do not spend a lot of money on the purchase of a furnace. A greenhouse stove should be compact, efficient and budget-friendly.

You can also make a bubafony stove - this is an economy stove. Unlike others, such a furnace is characterized by the intake of air, which goes from above.

This has its advantages:

• Longer burning of fuel;
• Able to heat the entire volume of the greenhouse;
• Improved heat storage for heating;
• Heats well from chips and chips.

To make such a furnace, it will be enough for you to take an iron barrel or other metal.

A rocket furnace has one similarity with long-burning furnaces - they need to be run only on a warm pipe.

During the combustion of such an oven, the blower door should be fully opened. When the stove is completely “dispersed” for work, then a light hum is emitted from it. That is when the rocket should be loaded with fuel. Gradually, air access should be covered. To make a rocket stove yourself, you will need a barrel with a diameter of 24 inches or 200-liter. For a blower, a hopper and a furnace, pipes of different sizes, both round and profile, are quite suitable. Outwardly, it is better to coat the oven with a special heat accumulator - adobe. This is necessary in order to heat the vegetarian solid fuel. The boiler can be made of a gas cylinder. Heating characteristics will not be affected.

To find out the designs of waste oil furnaces, visit this page: https://homeli.ru/stroitelstvo-doma/inzhenernye-sistemy/otoplenie/pech-na-otrabotannom-masle

A brick oven is a massive enough stove for a greenhouse. However, if your greenhouse is very large, then you can use it. A brick oven is difficult to build. But a rocket furnace made of bricks can be made in 5-20 minutes.

A good solution would be to use an autonomous furnace in diesel fuel. Such an oven is small in size and weighs less than 10 kilograms. To make a furnace in diesel fuel with your own hands, you need to take a metal casing, a fuel tank and connect them according to the principle of communicating vessels. The pipe should be equipped with a valve. The burner for the furnace, which will run on solar fuel, looks like a wick. The lower part of the wick should be immersed in a tank with liquid fuel.

Kuznetsov's furnace is another type of furnace for a greenhouse, as well as large rooms. No barrels are used here, only bricks. Such furnaces give high efficiency and good temperature. Kuznetsovka does not require special care and in some cases have not even been cleaned for several years. It is easy to integrate a water-heating circuit into such a furnace and not worsen the condition of the furnace. You can also make a mini-oven Kuznetsov.

Advantages of blacksmithing:

• Great traction
• Good heating;
• Pleasant appearance;

Homemade Kuznetsov stoves can often be found in summer residents who heat the greenhouse in winter.

Popular wood burning stoves for long burning

One of the most popular stoves on the market is buleryan and potbelly stove. Consider the most popular long-burning wood-burning stoves that you can buy on the market or make yourself.

Buleryan is a miracle stove that runs on ordinary wood. Wood flooding will allow you to warm the greenhouse well. The stove is quite economical, this is achieved due to the special design. The furnace at the working place lasts from 8 to 12 hours, with a full load.

Install buleryan should be further than 1 meter from materials that may self-ignite. The stove can be placed on an elevated surface to protect the space around the greenhouse. In addition, you can make a separate niche for the stove where you can put firewood.

If, after all, you decide to make a buleryan yourself, then make a pipe with a height of 5 meters. The best fuel for such a stove is wood. The heat transfer of such a furnace is more economical.

One of the simple and popular stoves for greenhouses is a potbelly stove. It has no complex structures, which allows you to make it from improvised means. To make a potbelly stove with your own hands, you only need a welding inverter, a chisel, rags, a hammer, sandpaper, body, refractory brick, steel pipes, grate, nozzle, door hinges and steel wire.

Also for greenhouses a potbelly stove in waste oil is suitable. How to do it, read the following article: https://homeli.ru/stroitelstvo-doma/inzhenernye-sistemy/kanalizatsiya/burzhujka-na-otrabotke

We make a stove for a greenhouse with our own hands: what it consists of and what kind of fuel you can use

You can make a stove for a greenhouse with your own hands, or you can buy it in the market. In the market you can find many types of systems that provide heating of a greenhouse. It all depends on your time and budget. But the basic design of the purchased stove, and the stove that you make yourself, will be the same.

The furnace for heating the greenhouse consists of a combustion chamber, channels, a conventional jacket and additional elements that depend on the type of furnace. A combustion chamber is needed for fuel combustion. Channels are needed in order to ensure the movement of air in the furnace.

For the furnace in the greenhouse, you can use different fuels: coal, simple sawdust, firewood and even fuel in a liquid state. Each type of fuel has its advantages and disadvantages. For example, if the size of your greenhouse is small, then a stack of firewood will be able to keep the greenhouse warm for a whole day. The main thing is to know how much time you need to keep the greenhouse warm.

How to make a do-it-yourself stove for a long-term burning greenhouse

To save their own money, summer residents recommend making a stove for heating a long-burning greenhouse with their own hands. The question is, what materials to use?

The best material that should be used to make a furnace for a greenhouse is metal. The material allows you to warm the entire room, transmitting warm air through the airspace. In this case, the most important element of the furnace is a metal casing.

To make such a case, you can take a steel cylinder, any gas cylinder that can be cut in half, a large pipe, a metal tank or a strong metal barrel. Next, you should find the pipe through which smoke will go.

Furnaces that have a water circuit have their advantages:

1. High performance
2. The ability to use different fuels for heating
3. No need for electricity. Only solid fuel is needed.

You will learn more about hydrolysis furnaces in the article: https://homeli.ru/stroitelstvo-doma/inzhenernye-sistemy/kanalizatsiya/piroliznyj-kotel-svoimi-rukami 

But there are also disadvantages - this is low efficiency and manual control. Such control means that it will be necessary to constantly supply fuel to the furnace. In addition, it will be necessary to clean the furnace from burning residues.

Do-it-yourself stove for a greenhouse: stages of creation

A self-made greenhouse stove will save you money. And in terms of effectiveness, it will be similarly purchased.

Consider the creation of a furnace using the example of a barrel:

1. Take a metal barrel. Cut off the top of the lid.
2. We make a groove in the barrel. Weld the chimney.
3. We cut individual doors in a metal barrel in order to lay combustible material.
4. Create a blow. We cut a hole in the center of the lid and weld another pipe. This is done for the purpose that during the operation of the furnace the fuel smolders. At this time, the lid goes down due to its weight.

For a home-made oven to work correctly, it is necessary to insert a cone-shaped pipe into the inside of the upper barrel. You need to insert so that the narrow part fits a couple of centimeters into the opening of the partition. The space around the pipe should be filled with dry sawdust.

Do-it-yourself stoves for the greenhouse (video)

If you want to save money, then you should think about how to make a furnace for the greenhouse yourself. The types of furnaces that you can do yourself are described above. Which one is better is for you to choose. A greenhouse oven is a great way to enjoy a fresh harvest from your land at any time of the year.