How to Make a Coupe Radius Cabinet

Building furniture by one's own hands is not an easy job, but with the right approach, the result of work is always pleasing with its uniqueness. If the radial cabinet of the coupe from the manufacturer, for some reason does not satisfy the consumer, then it is possible to build a radius enclosure with its own hands. With all the instructions, it is possible to do this even for non-professionals.

coupe radius enclosure Advantages of installing the

• coupe cabinet Space saving - the cabinet does not have a conventional swing door, so it does not require additional space for opening.
• Visual expansion of space - many models of sliding-door wardrobes have mirrored or glass doors that allow to expand the space of the room.
• Radius wardrobe gives the room a more modern look.
• A wide choice of individual design solutions.
• Possibility of built-in lighting.
• Use of the walls of the room, as the walls of the cabinet.

Radius cabinets of the coupe from the manufacturer

There are many manufacturers of coupe radii cabinets that offer a variety of options and design solutions. Let's consider some of them.

Factory Individual furniture offers the development of individual radii cabinets coupe. Many models of coupe radii cabinets, from concave and convex to curved and wavy, will please with its design and spaciousness. Austrian and German sliding systems guarantee quality and durability. A special program helps to calculate the cost of the cabinet right on the Internet.

The company Venta Furniture makes the radiused cabinets of the coupe with all the customer's wishes in mind. There is the possibility of developing any favorite radius enclosure in the remote mode, the main thing is to specify the dimensions, and also the specialists select the ready radiused cabinets for the compartment for the interior of the room.

Radius Line Company uses the latest printing technologies in the manufacture of coupe radii cabinets. If desired, any photo or drawing is applied to the cabinet door. Quality radii wardrobes for children's room not only decorate the room, but also ensure the safety of children.

Raumplus( Germany) is the world leader in the manufacture of radius coupe cabinets. Provides a warranty of 7 to 10 years. When manufacturing the radius cabinet of the coupe, it is possible to pick up other furniture that harmoniously fits into the interior of the room. The sliding door system complies with all international standards.

Radius cabinets of the compartment photo:

Company WOW Furniture is engaged in production of radius coupe cabinets for more than ten years. Designers are able to fulfill any wishes of the client in the development of individual radii cabinets coupe. On the radial wardrobe of the coupe, customer reviews are only positive.

For radii cabinets the coupe price is determined already when ordering.

Factors affecting the cost of the radius enclosure of the coupe:

• size;
• material from which the doors are made: glass, panel, chipboard, MDF, mirror, etc.;
• frame: aluminum or steel;
• manufacturer of guides and rails;
• internal contents of the cabinet: the number of shelves, drawers and baskets;
• additional development of individual design.

The coupe's radial cabinet, the cost from $ 130 to $ 200 - economy class, from $ 200 to $ 300 - standard, and from $ 350 to $ 1000 - radius cabinets of the elite class compartment.

Accessories for the radiused cabinets of the compartment

The doors of the radius enclosure of the compartment are moved by means of a special sliding mechanism. This process is almost silent. One of the components that goes into the sliding mechanism is the profile, which guarantees noiselessness. The profile in the radius compartment of the coupe is of two types:

• aluminum,
• steel.

It is preferable to choose an aluminum profile that is more resistant to damage and does not create noise when the wheels roll. Although the price of aluminum profile is higher than steel. The minimum thickness of the walls of the profile is 0.12 cm. The thicker the profile, the more reliable the fastening of the sheet material. When choosing a profile, be guided by such manufacturers: Komandor, Raumplus, Absolut, Aristo and others. When installing a radius enclosure with a height of more than 300 cm, the ideal option is Raumplus.

According to the type of slip, the following are distinguished:

1. Suspended systems - the door is fixed from below and hanging on rollers. In this system there is only an upper guide. The disadvantage of the suspension system is fast wear and unreliability. Since the door is fixed only to the top of the cabinet, all the load goes to the cabinet.
2. The best option for a radii enclosure is the lower sliding system. The door is attached and fixed to the upper guide, and the sliding guide slides. The load is distributed evenly, and the cabinet will last longer.

The same door of the radius enclosure enclosure consists of the following elements:

1. Vertical side profiles - act as a handle, they are: symmetrical and asymmetrical. When installing symmetrical side profiles, the door on both sides looks the same. Asymmetric profiles divide the door into the outer and outer sides.
2. Top asymmetric rollers - fix the door in the opening.
3. The upper frame of the door - serves to install the wheels and to lock the door in the upper profile.
4. The lower door frame is the mounting point for the lower wheels, ensuring the correct sliding of the door.
5. Internal filling of the door: mirror, glass, wood, etc. It serves as an ornament for the radius cabinet of the compartment and the entire interior in general.
6. Sealant - attached to the vertical side profile. Function: softening the impact of the door to the wall of the cabinet. Protects the cabinet door from dust pollution.
7. Door stopper - fixes the side profiles.
8. Screws: adjusting and assembly - adjust slip.
9. Positioner or stopper - allows you to lock a closed door in a certain position.

For the manufacture of the roof, side walls and doors of the radius enclosure of the coupe, chipboard is used, and for the rear wall a 3 mm chipboard is quite suitable.

Cabinets compartments of radius dimensions. Rules for calculating the capacity of the

The simplest way to calculate the dimensions of the radius enclosure is the online designer. In a special program, you need to specify the width, height and depth of the future cabinet. Next, choose the number of doors, the radius of the enclosure is convex or the radiused cabinet is concave. Type of material and filling for the door. Thus, we obtain a ready project of a radius compartment cabinet.

Advice on designing a radii enclosure:

• clearly define the space for the installation of the cabinet and the functional load;
• the number of sections for clothing should be more than two. So it's more convenient to arrange things according to the season;
• if it is necessary to build in luminaires, the roof of the cabinet must be taken out 12-17 cm ahead;
• recommended cabinet depth of at least 60 cm, for convenient location of all shelves;
• door width from 50 cm. With a smaller width, the doors fall out of the guides;
• do not make shelves for a cabinet that is more than 65 cm wide, since there is a risk that they will bend;
• the distance between the shelves is not more than 35 cm;

• on the thickness of the chipboard depends on the appearance and strength of the cabinet;
• the number of compartments is equal to the number of doors;
• provide for drawers for storing things;
• the width of all the doors of the radius enclosure of the compartment must be the same;
• can not be designed drawers opposite the door frame. Since in that place the doors do not open. Baskets can not be removed;
• if possible, make a built-in or semi-built-in radius enclosure;
• a semi-built or built-in radiused enclosure enclosure merges with the walls and conceals possible curvature, costs less, as less material is required, there is no gap between the walls of the cabinet and the wall where dust accumulates.

How to make the radial cabinet of the compartment

Consider the manufacture of the built-in radius cabinet of the coupe. To do this, you need to measure the height of the ceiling and the width of the walls between which the cabinet will be located. Next, determine the type of the radius cabinet: convex, curved, undulating or concave. Design the cabinet, using a special program or manually. Prepare tools for work.

Tools for making radii cabinets coupe:

• pencil,
• gon,
• drill,
• screwdriver.

Materials for the manufacture of the built-in radius enclosure of the compartment:

• drawings of the future cabinet,
• furniture board 18 mm thick,
• doors, prefabricated or ordered,
• inner filling: drawers, hangers, handles and guides,
• accessories: castors, profiles,screws and dowels,
• lateral, upper and lower panel falsework.

Instructions for manufacturing a radiused compartment compartment with your own hands:

• with the help of a pencil and a level make measurements and draw the future location of the built-in cabinet. On the wall, we mark the place where there will be vertical racks, and on the ceiling - profiles;
• , mark the height at which the shelves are fixed, and drill a hole for the dowels. Using a hammer, we block the dowels;
• profiles for shelves are attached to the wall. For reliability, install the lower shelf holders;
• apply marking to install the mezzanine shelf. Attach the shelf with self-tapping screws;
• measure the distance from the ceiling to the floor in the installation place of the side wall and cut the part according to the size;
• proceed to install the side profile;

• according to the cabinet drawing, install the coupe for the radius enclosure Filling: shelves, drawers and clothes hangers;
• when the internal filling installation is complete - proceed with the installation of the false panels;
• a false panel should be prepared in advance, their shape completely corresponds to the radius of the cabinet;
• with a screwdriver attach the panel flush to the side wall, ceiling and floor;
• cut and bend the lower and upper profile. When installing the lower profile, insert the positioners or the stopper one by one on each door;
• attach the lower and upper profile with screws on the panel falsh;
• cabinet door is manufactured according to the radius of fastening profiles. It is better to entrust this matter to professionals;
• in case the door is not decorated, use a self-adhesive film or other suitable material for finishing;
• to the sides of the door, fix the vertical profiles with screws. Install a silicone or rubber seal;
• further fix the upper and lower frame of the door;
• install upper and lower rollers;
• , first insert the upper guide, and then the lower guide rollers onto the rails;
• Check that the door is sliding properly. To adjust the slip, use a hexagon;
• if desired, glue the pile, to protect the doors from bumps.