Bedside table for shoes with your own hands

Get rid of the shoe disorder in the hallway, help the bedside table for shoes. Of course, you can buy a nightstand in the store, but there you will sell consumer goods of questionable quality at an inflated price. An exclusive piece of furniture, which will immediately rush guests in the eyes is absolutely not difficult to do with your own hands.

Decide to start with materials. Good tables are made of a wooden board, laminated chipboard or finished with facade MDF boards. For a good nightstand in the hallway will require a solid foundation, finished to your taste, harmonizing with the interior materials. Choose your suitable version of the bedside table for shoes can be from numerous photos on the Internet.

For the manufacture of bedside tables for shoes with their own hands will require a small set of tools, furniture fittings and materials. Depending on the free area in the hallway, you can choose a vertical or horizontal model of the bedside table for shoes. The simplest tables are made of metal.

Booths for shoes made of metal

1. It is best to order accessories in the workshop for the manufacture of metal window grilles for your sketches and to assemble all the houses on bolts.
2. The side racks are forked, it is better to make of a rod or square with a cross section of 6 - 8 mm, this will be quite enough for a beautiful look and bearing loads. You can order a twisted square and forged items for the exquisite design of the bedside table.
3. Shelves are made from a strip of rolled metal with a thickness of 2 mm and a width of 50 mm. It is necessary to provide in the drawing the attachment points, which you will be prepared in advance or you will drill them yourself.

Materials and tools for making wooden bedside tables for wood

Tools for manufacturing bedside tables for shoes

1. Screwdriver and electric jigsaw. Screwdriver - up to 8 - 10 mm diameter of the cartridge. You will need a jigsaw in the case of the curvatures provided in the construction. You can do with a fine-handed wooden hacksaw.
2. A set of rasps and an abrasive material for cleaning out flaws.
3. Sandpaper, PVA glue, tinted pencils and stubs for confirmations.
4. Marking devices - measuring tape, carpentry corner, pencil, etc.

Materials for shoe cabinet in the hallway

1. The material area is easy to calculate. According to your plan - scheme, buy a board or laminated chipboard. On the back of a fairly small sheet of fiberboard.
2. Behind legs, door handles and drawer guides, one should go to the furniture hardware store. Handles are a very important element of decor. Beautiful handles on the doors - cardinally transform and change for the better any most banal product.
3. Based on the projected dimensions, you need a bar with a cross section of 30x30 mm and a board or chipboard of at least 2 x cm thick.

Detailing the cabinet for the hall

1. For the conventional unit, you can take a laminated pressed board of sawn timber thickness of 20 mm. It can be cut to size independently by electric jigsaw or small-toothed circular saw. If small cuts appear at the sawing at the sawing - do not worry, they are easily decorated with a face band and a furniture corrector of the appropriate color.
2. For an elementary pedestal, no frills suits an approximate pattern:

• 833X350 - on the side of the curbstone;
• 850X350 - on the top board( table top);
• 818Х100 - for clamping and base planks( 4 pcs.);
• 813X360 - on the front facades.

Rear rear wall, cut from fiberboard or hardboard, and its size is 830X845 mm.

The above dimensions are suitable for a simple horizontal bedside table.

Construction of the frame of the bedside table

1. The base of the frame, made of a bar or steel corner, in the form of a parallelepiped. The frame base is covered with a decorative facing plate.
2. The back wall is made of fiberboard on the side of the bedside table or from the chipboard in case if a mirror paired with a bedside table is provided.
3. Accessories for boards from chipboard or wooden boards are cut with a jig saw or a circular saw. On each plate is done the rice marking with a thin pencil.
4. The end pieces, which were machined with a hacksaw tool, are decorated with a miter self-adhesive tape. There is a wide choice of miter bands, different shades, well combined with laminated chipboard.

Fixing of fittings for wooden bedside tables for shoes

1. Transverse tie rods have a significant role in the reliability and stability of the frame base. The bottom of the frame base is also made of a stronger and thicker material. The defining requirement is the stability of the bedside table for storing shoes.
2. Four holes are drilled at the corners of the bottom. It is advisable to buy the legs in the furniture store of the fittings or to make it yourself from a thick and strong timber.
3. Handles for doors and overhead decorative elements for beauty, give the facade an unusual and individual appearance.
4. Figured elements of the lining can be purchased in a furniture store and put them on the facade with a glue PVA and fix it with furniture studs.
5. Approximately the same way, decorative facade linings are attached to the front side of the shoe cabinet.
6. To eliminate small chips, scratches, potholes and other defects, there is a tint grout and a polish for furniture. Damage spots shpaklyutsya, rubbed, decorated with a cosmetic pencil and polished special furniture polish.