The main purpose of the special tool
The profile cutter for gypsum board is designed for the fastest, most convenient and inexpensive installation of metal profiles that form the supporting frame for gypsum board panels. The use of this special tool justifies itself:
- When finishing rough walls with gypsum boards;
- When manufacturing internal partitions from profiles;
- When reshaping residential and non-residential space in an apartment or a private house.
After applying this element to the frame, undesirable dents do not remain and the screws of the screws do not protrude, which interfere with the further installation of the finishing material. Important! When working with this device, it is necessary to avoid open contact with the junction of the profiles where burrs can form.
Types and subspecies of prosecters used in private construction
The dissector for gypsum board is intended for different materials and uses, which directly affects the number of different subspecies of a single tool. The most common type of tool is a gypsum plasterboard cutter reinforced, which can be used for any type of profile material used in private construction and repair.
This type of device is made of a high-quality metal alloy, which allows you to obtain the maximum period of operation without changing the cutting part. In addition, such a cutting part is easily replaced, which automatically transfers the device to the category of a reusable tool.
Important! Special knives should be selected in accordance with the type and type of the device, so as not to translate the profile material.
For professional construction works, a professional gypsum cardboard cutter is used, the quality and cost of which is higher than that of other analogues of the device. The purchase of this type for private repairs does not make sense, because the cost of the device will exceed the cost of the material that is to be installed.
Is it worth repairing the protector?
Like any construction tool, the cutter is amenable to wear and mechanical failure. As a rule, any malfunction of this device can be eliminated if it's worth it. In other words, when buying a cheap tool, its repair will cost more than the total cost. But if you bought a reinforced tool, the cost of which was quite noticeable, then you should replace the worn out part.
Important! The repair of this tool must be carried out in the correct form, excluding the self-updating of the device.
In order to strengthen the work of this element, you can replace the standard cutting parts for better and more durable. This will allow one knife to be used throughout the repair process. The handle of the cutter has rubber covers that can wear or tear. In this case, it is better to replace them, so that the tool is firmly held in hands, without distracting the master from the very process of construction or repair.