Snowplower with own hands
Manual snowplowers of brand-name manufacture are quite large sums. Here for this and consider what we can use to harvest snow.
Often you can notice on the streets of the city a special technique for cleaning snow. For example, a tractor.
For a homemade snowplow, we need to use some engine of the unit( it is possible from the motoblock), it is usually purchased separately. It is worth remembering that for the whole winter the snowplower is used once 6-8, so when choosing a motoblock, we do not use the method more expensive means better. But the power should not be less than 4.8 kW.It is also possible to use an air-cooled engine, here it is important not to forget the protection of air removal from snow while it is better to make a drawing of the future device. The most optimal device width is about 50 cm.
The device design consists of the following parts:
- Screw housing
- side frames
- frame
- handle
- screw shaft End-cutting in the middle of the tube in which the metal plate is.
During the rotation of the shaft, the metal plate must throw snow. To secure the snow-removal self-made auger from the ice, you need to think about the safety pin. After the construction of the shaft, you need to think over the shape of the bucket so that the snow is easily rammed and not touched by the master, it will be enough to be a simple bucket, but with a quality sheet of iron.
You can paint your own snowplower and it will get a more pleasant look, as an example of a technique in a photo.
There are three generally accepted designs made by self cleaners for snow. And this is such a technique:
- Screw snow thrower
- Rotary snow cleaner
- Snowplows from chainsaw
The first construction we reviewed above. The construction of a self-made rotary snow thrower. The lathe and the welding machine are required as tools. Such a device consists of an electric motor with a silencer, a gas tank and a cable for controlling the damper. As part of the snow-picker, a trimmer often gets to it, but at the same time, the safety requirements also increase, especially my hands often suffer.
The wizard who made the snow-removing machine, gets the opportunity to change the scrapers and adjust the width of the grip. Self-construction of a snow cleaner on video.
How to make a snowplow from a chainsaw "Friendship"
This will require a chainsaw and the following sequence of actions for the video.
How to make a snowplower from the calm
Detailed instructions in the video.
Snowplow using the Neva motor block
More about this type of snow removal without using a shovel on video.
Very often, household equipment owners use a variety of vehicles for snow removal. Using UAZ as a snowplow can be seen on the video.
