Upholstery lining: briefly about the main thing for an exceptional result

click fraud protection

Variety of lining and characteristics

Lining is a type of decoration decorative material that is used for covering walls, ceilings and much more. In fact, a modern lining is a thin upholstery slide with a groove joint, which allows seamless jointing of the lining boards. Facing lining, first of all, differs material from which it is made.

According to this criterion, it can be divided into two main types: wooden and plastic. Wooden is used mainly for interior finishing of country houses, saunas and so on, and plastic is used for finishing offices, balconies, kitchens, bathrooms. Upholstery of the house with a lining made of wood has a number of advantages.

For example, wooden slats are economical, very user-friendly and easy to install. It is resistant to mechanical damage and has a natural origin, which means that it is environmentally safe and has excellent heat and sound insulation properties.

The disadvantage of this kind of finishing is that for the preservation of its properties and the prolongation of the service life, regular treatment with special solutions is necessary.

Cladding with clapboard made of plastic is distinguished by a huge choice of colors and textures. It can also be used for exterior surfaces. This material is able to give the room a cozy and original. Its main disadvantage is the susceptibility to mechanical influences.

What should I take into account before the upholstery of the house by the clapboard?

Before you enclose the house with a lining made of wood, it should be remembered that the quality and the presence of defects, it is divided into several classes. Extra class( best) - no knots and defects, class C( the lowest grade) - the presence of cracks, depressions, holes and knots. After buying a wooden lining must be stacked, shifting with wooden blocks, and dried.

Upholstery lining with their own hands - the process is simple. Even an inexperienced master can cope with this. If you want to cover a concrete or brick wall, you must first collect a frame of wooden bars.

Throughout the process you may need a hammer, drill, nails, dowels, screws, hydraulic level, hacksaw. Also take care of the space around you, you should not be pressurized, and the entire tool should be within reach.

We proceed to the lining with the clapboard

. For a smooth wall, you can use thin enough bars, which should be nailed or glued to the base, so as not to reduce the useful area of ​​the room. For uneven surfaces, bars of a thicker section will be needed, which will be pinned to the wall by dowels.

With the help of the construction level and the plumb bob, it is necessary to check that the whole frame is in the same plane. If necessary, wooden wedges are placed under the bars to level the plane. The bars can be fixed horizontally, vertically and diagonally. The main thing is that the lining is perpendicular to the frame. The step between the bars is 50-100 cm.

When the lath is ready, proceed to the installation of the lining. Cutting the bar along the length, if necessary, you need to start fixing from the corner. Further, moving in the right direction, place the slats in the grooves. To the frame they are fastened with nails or staples. If only nails are used on the front side, they must be clogged until they stop, so that they can not be seen. If a construction stapler is used, the staple at an angle must enter the spike of the rail.

To the corners, you need to nail or glue special decorative corners, which will hide the seams on the outer and inner corners. If painting is required, then it must be done before lining the room to avoid streaks. At this work is finished, the installation of plastic panels is made using the same technology.

instagram viewer