Stairs in the garden with their own hands

Often, a plot of land located in the country or in the immediate vicinity of the residential building has a complex terrain. It is enough to make certain efforts with a minimum of costs for materials, so that as a result there is a spectacular staircase in the garden - not only functional, but also capable of decorating any home territory.

Step-by-step instruction on creating a ladder in the garden with your own hands

1. Initially, you should mark the site for a future garden staircase, for which you can apply wooden pegs up to 0, 5 m and twine. Breaking the stain under the erection of the stairs, you need to use a tape measure and a square to ensure the correct size.

2. By equipping a ladder in the garden on a slope, using a level and a tape measure, it is necessary to determine the elevation of the top point of the ladder above the bottom. This is required for correct calculation of the height and length of the future steps.

3. Using a shovel, carefully remove the top layer of the soil, cleaning it from the grass carpet.

4. Steps in the garden with their own hands to do simply. In the ground, you need to dig the grooves under the steps, for which you need to calculate the width and height of the steps. For this purpose, you can use the table of relations between the height of the step and the width of the tread. On average, the height of the step should be 15-17 cm, and the width - 30-35 cm.

5. When making steps in the garden, be sure to check the level of the excavated trenches with the help of a level.

6. From the gravel, sand and cement, it is necessary to prepare a concrete mixture for laying the base under the steps, then it should be laid using a trowel with a leveling surface and left for 24 hours to freeze.

7. It is necessary to lay out the steps of brick or concrete blocks, wiping the seams and verifying the level of verticality, as well as the horizontal nature of the masonry. For laying, you need to use cement mortar or ready-made building mixes based on cement.

8. The rest of the trenches on the level with the laying should be filled with small gravel with layered ramming by hand ramming.

9. Crushed stone must be laid with a slight lift from the surface of the brickwork. It is desirable to check with the help of a level.

10. Since slabs for equipping with treads have enough weight, they can not be laid alone alone. This stage must be performed together. Together with the assistant, you should lay the plates on the bed of the mortar.

11. The edges of each slab should protrude 40 mm from the brick. The slab itself should have a slope to the underside of about 10 mm, to drain water.

12. When stacking the next row of treads, it is required to control the accepted height of the steps with the help of a tape measure and a level. All joints must be carefully filled with mortar.

13. Using the level, you need to make sure that the edges of all the missteps are on the same straight line.

Having adopted the above recommendations on how to make steps in the garden, as well as thoroughly acquainted with the photos of the relevant stages of work presented on our website, you can arrange a beautiful and functional staircase on your house site. Such a ladder will not only provide comfortable movement along the slope of the site, but will also please with its reliability and durability. Well, the neighbors probably want to build something similar on their site, so there will always be an opportunity to give them a good advice.

Photo of stairs in the garden