Primer aerosol is a well of practicality
Primer in the form of a spray is perhaps the best choice for beginner primers who want to protect a certain surface from external influences, or simply align it. It is a container in which collected chemical elements are collected, during the spraying forming the necessary layer of the finished primer.
This material is not perfect, so it does not lack minuses, but it has a lot of advantages. Let's start with the positive side, the good of them is enough. The first plus is an easy and, not unimportant, uniform spraying of the , which is necessary for work when the number of free hands is limited, and work needs to be done quickly and efficiently.
The second plus is the versatility of the .Primer-aerosol in cans is ideal for both indoor and outdoor applications. In general, the material is quite versatile.
The third, and very significant plus - a good ability to align the surface of .This kind of primer ideally aligns the unsuccessful places, the main thing is not to rush and carefully observe the spraying process. Also, such a primer dries very quickly, and significantly
And this primer has gained immense popularity due to the fact that it can be applied in the most inaccessible places, which will simplify your work as much as possible and will shorten the time for work to a minimum, because one hard-to-reach site can take you several hours, and here - "pshik" andready.
Primer in cans - start working
Having decided on applying such a primer, you should do some preparatory work. They do not require special skills, but take some time. First of all, you need to clean the surface of all kinds of dirt and imperfections of the coating, such as rust, dust and grease stains. This is done with sandpaper, a vacuum cleaner and degreasing liquids.
Additional preparation steps depend on the nature of the material being processed. For example, if you need to process a tree, and it is not polished, then it needs to be ground, then cleaned thoroughly from the dust that has appeared. Now everything is ready for work, now the primer-spray begins to work.
Primer-spray is the secret of working in simplicity
After a complete cycle of preparatory work and the chosen primer, you can start applying it to the surface. To do this, open the can, it is quite ordinary, as we use everyday in everyday life and cosmetics, so there should not be any problems with its device.
Before work, we strongly shake the balloon, this allows us to make a better consistency of the primer, which will speed up your work and improve the properties of the primer itself. Intensively shorten the balloon up and down for 20-40 seconds.
Now it's time to spray it to the surface. This is done from a distance of 25-30 centimeters, which provides ideal primer layers. Do not forget that the primer is applied from the top down to avoid streaks. Press the button on the can and with uniform, rotational-translational movements, apply it to the surface.
After the entire surface has been primed, wait 30 minutes and start applying the second coat. It should be more subtle than the first, so to speak, semi-exclusive. Its application takes less time, but requires more care to more properly level the surface.
After this layer, proceed to applying the third, final layer. It is also done 30 minutes after the second. It is applied uniformly, in one approach, after that we look for irregularities and fill them with an additional quantity of a primer. That's the whole secret of the right primer from the can.