Slopes on the windows with your own hands

Masters claim that the implementation of slopes on windows is one of the most complicated processes at the final stage of finishing works organization. Even with the most painstaking measures to change the window, the opening itself receives considerable damage and many are interested in the question of how to make slopes on windows with your own hands.

Slope variants

There are several technologies for sloping - plaster, leveling with plasterboard, creating plastic slopes, puttying. Each of the options is different for its technology, work process, advantages and disadvantages. In search of the question of how to make slopes with your own hands, most choose two options: plaster and the creation of plastic slopes. You can find below the video installation of slopes on the windows with your own hands, which allows the owners to save a little and do the proper work with their own efforts. However, one must understand, only the person who is slightly oriented in the construction sphere will be able to master the forthcoming volume. Only in this case it will be possible to talk about a qualitative and accurate slope.

Plastic slopes for windows

The process of installing slopes on plastic windows with your own hands begins with the preparation of the surface along the entire perimeter of the window. In the U-shaped form, wooden slats are installed. It should be noted that all work is carried out according to the building level, which will avoid errors. After, near the window a niche is knocked out, where self-cuts-bugs will be attached, on which the F-shaped groove is attached. The second step is the fastening of the next groove, which is part of the structure, which allows to tightly hold the strip covering the near part of the wall overlap. It turns out a certain niche, where the plastic slopes are mounted. Some prefer to fill the resulting niche with mineral wool or other heat-insulating materials. From the first time, plastic slopes on windows are far from perfect for everyone, but you can hide some defects with the help of transparent silicone. For plastic windows, choose materials that are resistant to the effects of ultraviolet rays and to mechanical damage.

Video installation of plastic slopes:

Plaster of slopes

This method of leveling slopes bribes with its simplicity. To perform the work you will need a plaster mix and putty. Dry mix, it must have a cement base, dilute to creamy consistency, after which you can proceed to leveling off the slope. Before starting work, a work surface should be prepared. Slopes are removed from the ledges, deep cracks and holes are pre-treated. After the beacons are installed. Here it is necessary to take into account a small slant from the window box directly to the corner of the window slope itself. Then you can start applying the solution. For greater adhesion, reinforcement is recommended - a fiberglass mesh is attached to the slope. Often, when plastering slopes on windows with their own hands, it is required to apply several layers of mortar. The next layer is applied after the first layer has dried a little. Once the final layer of the solution has dried, you can proceed to the finish of the slopes.

Slope plaster videos:

Assembly of plasterboard slopes

For clarity, we suggest you see the video for installing a slope of plasterboard on plastic windows with your own hands :