Locking the lock in the interior door with your own hands

click fraud protection

Mounting of the locking mechanism in the interior door allows to increase the comfort of living. A small number of tools are needed for the installation: a drill, a screwdriver. Any landlord can work. Takes the lock of the lock in the interior door with his hands for about 15-30 minutes.

Contents of

  1. What tools are needed to mount the lock?
  2. Step-by-step instruction for installing the lock in the interior door
  3. Tips for specialists
  4. Video locking the lock in the interior door with your own hands

What tools are needed to mount the lock?

The careful installation of the lock in the interior door depends on the correct preparation, the tools and components used. The use of amateur or professional equipment will increase the reliability of performance and simplify the installation procedure. To work the owner will need:

  • set of handles and lock mechanism;
  • chisel;
  • self-tapping screws( included) and screwdriver;Fountain drill bit 23 mm;
  • drill and crown cutter for wood( diameter 5 cm).

In the absence of tools it is recommended to take them from friends or neighbors. Careful work without the use of auxiliary equipment will not work. Find out how to insert a lock into the interior door will help in the detailed study of photo instructions and the advice of masters.

Step-by-step instruction for installing the lock in the interior door

After purchasing the kit, preparing the tools, you can immediately start working. Additionally it is recommended to study the requirements and recommendations of the lock manufacturer. Direct locking of the lock is performed according to the following instruction:

1. 95 cm from the bottom of the web, 6 cm from the edge. The point of intersection is marked with a pencil on the canvas itself.

2. The mark from the canvas is transferred to the center of the end part( using a square).

3. At the marked point on the end using a drill-pen and a drill hole for the lock mechanism is drilled.

4. On the canvas with the help of the crown cutter in the previously installed mark the hole under the handles is prepared.

5. A lock is inserted into the hole prepared at the butt end of the door, around the perimeter is penciled around, removed from the hole.

6. Using the chisel in the end part, the area under lock is prepared( at the marked perimeter of the outer part of the mechanism).The thickness of the cut out section should be equal to the thickness of the lock latch( approximately 0.5 cm).

7. The lock is installed and fixed in the prepared hole using self-tapping screws.

8. The first is the handle with screws. First, the screws are unscrewed, then the handle is installed in the door.

9. With the second part of the element itself removes the handle and decorative pad( using the key from the kit).This procedure is well demonstrated in the attached video instruction.

10. The second part of the handle is inserted into the door, fixed with screws. The decorative cover, the handle itself is installed. The installation work is complete.

After executing the installation, the executor will only have to check the work of the elements and remove the generated garbage. In the future, it will be necessary to periodically adjust the handles( once every 3-4 years) because of their dilution as a result of operation. Lubrication of the lock is carried out in case of its strong jamming( dust, garbage).The mechanism is dismantled and processed in accordance with the manufacturer's instructions.

Advice from

When carrying out a self-assembly of the lock in the interior door, remember to carefully drill the holes and cut the area under the latch. Drilling holes with a milling cutter should be performed on both sides of the blade. This will help to prepare the desired diameter and easy to install components. Equally important is the gradual tightening of the screws holding the handles. With a strong twist, the probability of overly tight fitting of the elements increases and the difficulty of opening the door. Compliance with these requirements will help to break the lock without professional help. Video of locking the lock in the interior door with your own hands

instagram viewer