How often to clean
Any blockage is easier to prevent than to remove. Every day, not only dirty water merges into the sewer, but also the remains of food, fat, hair and wool, garbage. All this settles on the pipes, clogging them.
Do not forget about cleaning the sewer. You can start with a weekly cleaning of pipes with boiling water and monthly cleaning with the use of specialized chemicals.
It is important not only to fight the blockage of pipes, but also to clean the sewage wells in time. This can be done as needed, or planned( 1-2 times a year).The cesspit can eventually not only become clogged, but microbial organisms can accumulate there. And in order to prevent the formation of mold, rot and infectious diseases, it is necessary to remove such contamination by cleaning the well in a timely manner.
Special equipment and methods for cleaning wells. Ilosos
Ilosos is a specialized device for the implementation of sewerage operations, consisting of a cistern and a vacuum pump.
The use of the sludge for pumping out cesspools is the most qualitative and convenient method. You can use it at any time of the year.
Ilosos pumped out various cesspools, concrete and plastic wells, septic tanks, as well as transported pumped waste.
It is best to use the silos for preventive pumping out cesspools.
Vacuum cleaning method
The vacuum method of cleaning the well consists of two parts: directly cleaning the sewerage, pumping out sewage. This is done by means of a vacuum pump of high power. At the end of harvesting, the waste is collected and disposed of. This pumping method meets the requirements of environmental services and does not harm the environment.
This method, as well as the previous one, is effective with regular scheduled use.
In order for the sewage system to work without failures and emergencies, and also in order to adhere to the sanitary norms, it is necessary to carry out regular, planned cleaning of the cesspools.
Hydrodynamic flushing of
Hydrodynamic flushing of the well consists in flushing the water, waste and debris from the walls of the cesspool with a powerful head. This allows you to eliminate any types of obstructions: organic, inorganic. After the walls are washed, the waste is collected and disposed of.
Sewage cleaning in this way will be effective, only with periodic application, according to the selected schedule, and not at all effective in emergency situations. It is advisable to choose a hydrodynamic washing method only if there is a lot of silt in the drainage pit on the walls.
Washing with chemical means
This method consists in using strong chemical preparations that dissolve fat and other contaminants, soften and transform sediments. It is very effective and does not carry any threats for a person, but because a large amount of such substances is required to flush a large volume system, it is not in demand in many respects because of the high cost of reagents.
The process of washing the well with this method is performed by a specialized device and a chemical substance that is pre-foamed. Foam treats surfaces even under a plumb, creating a mechanical impact.
Thermal rinsing
The thermal cleaning of the sewage system is very similar to the hydrodynamic, but with one difference - the water is very hot( 160̊C).As a result, all deposits, including fat, are dissolved and removed from the walls of the well.
This is one of the most effective professional methods of purification, but not often applicable in practice, as it requires complex technical implementation.
If you combine thermal and chemical methods of washing sewage wells, you can achieve good results already with the first application, several times improving the effectiveness of these facilities.
Water flushing of the
network If there are dense deposits in the household network, then to remove them, it is necessary to act on them mechanically, by means of a water jet. For this purpose, the opening of the manhole is covered with a cork and poured with water. The resulting pressure, after pulling out the plug, rinses the blockage.
Manual cleaning of the
After cleaning or flushing the drain hole, the process must be completed by manual cleaning. It is able to comprehensively and carefully remove small clogs and deposits. This method is included in the manual cleaning of the well without the use of automated systems.
