Diamond drilling of reinforced concrete
One of the most common works that is performed by diamond tools is diamond drilling of reinforced concrete. This is a highly effective technology that allows you to make holes of any shape. Having such advantages, this kind of work is simply indispensable in any construction site where it is required to drill reinforced concrete.
The use of this technology quickly solves the problem of drilling the required number of holes in a short time. It is produced in horizontal and vertical positions with an angle of inclination from 45 to 90 degrees. The diameter of the holes is from 20 to 500 millimeters. The drilling speed is 2-6 cm per minute, depending on the material and diameter. Power is supplied from the network with a voltage of 220 or 380 volts.
Important! To ensure normal and efficient operation, there must be access to water supply and a stable power source.
Pros of working with a diamond tool for reinforced concrete
Diamond drilling of reinforced concrete is by far the most reliable and safe way to solve drilling problems. The essence of the technology is as follows: the drilling rig consists of a crown with a diamond segment, an electric motor, a supporting base and a post. This method is unstressed, allowing holes to be made without damaging the load-bearing elements. This is the main advantage of diamond drilling before the work of a jackhammer.
During operation, the construction does not receive destructive vibrations that adversely affect its integrity. The big plus of this method is the absence of any special conditions. Diamond drill for reinforced concrete makes holes quickly and with metric precision. In comparison with it, all other drilling methods are considered obsolete.
Note! Drilling reinforced concrete with a diamond tool is harmless to the operator.
Advantages of the method:
- No dust, vibration and noise;
- Dimensional accuracy and smooth round shape;
- Work is done quickly;
- Ability to use in hard-to-reach places;
- Drilling at an angle and deep;
- Allows you to solve complex tasks.
Dismantling and recycling of reinforced concrete
In addition to drilling operations, many other operations are carried out with reinforced concrete. One of the most difficult is its disposal. Its strength becomes a problem when it comes time to disassemble this material. When demolishing buildings from reinforced concrete, because of crowding, old methods, for example, undermining, are far from always acceptable. In such a situation, hydroshells, hydraulic hammers, poslers and crushing machines are used.
Shears for reinforced concrete - this is an excellent tool for disassembling old structures. They have powerful blades and teeth that easily snack the armature and break the concrete. This is an effective, reliable and accurate method for demolishing buildings.
After the stones and fittings remain from the building, a concrete crusher enters the case. Often these are jaw crushers. They have a reliable design, are easy to operate, produce a high degree of grinding, produce a minimum of dust and noise. The most common are mobile crushers. There are 4 types: mobile jaw, mobile rotary, roller and hydraulic.
Note! There are crushers with a complex and simple movement of the cheeks. Mobile crushers are often equipped with a complex option, as they are more versatile.