Mixer-waterfall cascade type: on-board bathtubs, models, types

click fraud protection

Waterfall Mixer
  • Features of
  • Basic models and types of
  • Advantages of
  • Disadvantages of
  • Installing on-board bath
  • How to cut a mixer into a wall?
  • Contemporary ideas from designers

Cascade mixers or faucet-waterfall - this is a modern and stylish solution for decorating bathrooms. The arrangement of such a mixer involves the flow of water through a wide plate of various shapes and configurations, thereby simulating a waterfall flow of water. The contemplation of such a man-made waterfall brings a huge aesthetic pleasure. Bathing under a powerful jet of cool water allows you to enjoy unforgettable sensations in a comfortable home environment. Waterfall mixers are so original design solutions that it is immediately very difficult to understand their true purpose.

Cascade bath mixer
Cascade basin mixer
Waterfall shower mixer

For the selection of the mixer and varieties that can be purchased, read our other article.

Features

The difference between waterfall mixers and conventional ones is in appearance - it's hard not to notice. The large dimensions of the cascade spout, the flat form of the gander, which forms a powerful jet of waterfall type, are used in the design of such mixers. The internal arrangement of mixers of all types operates on the same principle of supplying cold and hot water and mixing it for the required temperature.

The only nuance is that the water supply to the cascade mixers should have a high throughput, because a high-quality waterfall mixer must be able to flow large volumes of water.

Cascade mixers by increasing the width of the spout can pass through themselves 25-35 liters, and some more than 50 liters of water per minute, respectively, gaining a bath in 3-5 minutes. They are indispensable for large baths. In some models, designers focus not on the power of the jet, but on the interesting shape of the outside of the mixer.

Wide Waterfall Mixer

Basic models and types

Installation and installation of waterfall mixers is no more difficult than installing a standard mixer, and depends only on the type of attachment of the model itself. Most models of waterfall mixers are universal, they are suitable for mounting in any sink or bath. In expensive sets of baths, the mixer is prepared precisely for this model and is an integral part of this kit. These mixers are installed according to individual technologies.

Elite Waterfall Faucets

There are three main ways to install a waterfall mixer:

  • Surface-mounted bathtubs or sinks .The installation uses a flexible hose for water supply, which provides a wide variety of options for attaching the mixer to the plumbing. The mixer can be installed on the side of the bath in a convenient place for you, fix on the separate shelf not only the mixer itself, but also the shower attachment, choosing different options at your discretion.
  • Wall-mounted faucets. Installation of such a mixer involves pre-installation of hot and cold water in the wall, and careful disguise. At the outlets of the feeders, the mixer bar is mounted on which the mixer itself is mounted. This type of attachment mixer is the most convenient and popular.
  • Floor cascade mixers are a vertical stand , which is fixed to the floor, where the hot and cold water supply is hidden. It is on this rack that water is fed directly into the mixer. The design of these mixers is very original, but it assumes the presence of large areas of the bathroom.
Mixer cascaded on the side of the bathtub
Waterfall Wall-Mounted Mixer
Outdoor waterfall mixer

Advantages of

The design of modern baths primarily implies the presence of comfort and aesthetic design of sewage systems. This principle is also observed when installing mixers. The easiest way to hide the water supply system and all plumbing plumbing sites is to install everything that spoils the appearance of the room. Built-in mixers are so simple and convenient to use that they can satisfy the demands of any picky buyer.

A small waterfall mixer for the sink

The positive qualities of the built-in mixer can be safely attributed:

  • the ability to organically hide the flexible water supply that connects the mixer and the shower head without disturbing the overall design of the bathroom;
  • position the elements of the mixer in the places most convenient for the user;
  • the ability to take the shower hose to the required length and, if necessary, shorten it, which prevents unwanted splashes of water;
  • such mixers usually have a special button that allows you to limit the temperature and power of the water jet, which undoubtedly leads to good savings.
The crane is cascaded to the sink
Golden Waterfall Faucet
Universal waterfall mixer built into the wall

Disadvantages of

There are also disadvantages to this design, which primarily depend on the flexible water supply hose:

  • frequent operation of flexible hose, which consists in constant straightening and bending, which leads to rapid failure;
  • the built-in part must necessarily have high strength and tightness.
Quality Italian Cascade Mixer

Installation on the side of the bath

The requirements of the modern buyer for the stylish and comfortable decoration of bathrooms are constantly growing. A new-fangled competitor of an ordinary mixer appeared quite recently, but its popularity is rapidly gaining momentum. This novelty is attached to the bathtub or washbasin itself, which gives the bathroom design not only style and unusual look, but also maximum comfort. Especially spectacularly look cascade mixers, imitating a miniature waterfall and immediately fill the bath with water.

Unusual waterfall mixer
Mixer with wide spout
Mixer with narrow spout

When choosing the type of mixer to be installed, it must be remembered that as a result of frequent loads on the flexible hose, the possibility of malfunctions increases several times. That is why, a professional plumber advises to leave free access to the hidden water supply structures. The best option is to hide the pipes under the removable decorative panel.

Hidden in the wall of the pipe

Installing the mixer on the side of the sink will not take long for a professional plumber. An experienced master will cope with work in a few hours.

But if you decide to install the mixer yourself, good preparation is absolutely necessary: ​​

  • It should be remembered that the holes that are not planned for the model development can be cut out only in acrylic or plastic parts. Cast iron and steel baths, in order to avoid damage and chips, at home, it is better not to touch.
  • Prepare a tool that will come in handy for you: electric drill, screwdriver, wrench, milling cutter for cutting holes.
  • Carefully study the internal structure of your mixer and how to attach it.
Waterfall mixer in the package

Assembly steps

  • Select the place where the mixer will be mounted and mark it with a simple pencil;
  • Cut the hole of the required size with a diamond bit;
  • The mixer, with the attached silicone gasket, is installed in the hole and fixed with a fixing nut under the side of the bath;
  • We connect flexible feeders for hot and cold water to the mixer;
  • Install the mounting panel that comes with the mixer;
  • Turn on the water and check the quality of the mixer installation.

If any doubt arises during the installation of the integrated mixer, always consult a specialist to avoid an emergency.

How to cut a mixer into a wall?

Mounting the mixer in the wall must be carried out strictly according to the instructions. Modern mixers are easy to install, if thorough preparation for installation:

  • Provide hot and cold water supply to the mixer installation site;
  • In the wall, carefully prepare a niche for the internal elements of the mixer, or make a false - a panel of plasterboard, which will provide easier access to hidden items if repairs are necessary;
  • Connect the mixer elements to the water inlet, taking into account the features of the flexible or rigid connection;
  • After completing the installation, be sure to check the quality of the work performed. In the presence of water leakage, it is necessary to tighten the connections of the mixer nuts and eccentrics.
Installing a waterfall mixer in the wall
Mounting the cascade mixer in the wall
Wall-mounted mixer

Modern ideas from designers

Using cascading mixers is now at the height of fashion. Wide and flat spout has become a favorite of all leading plumbing designers. As a result, quite often the design models and closely resemble the classic faucets. Most often, the design of waterfall mixers involves the effect of "invisibility".

Decorative waterfall mixer

For example, a model such as a mixer-shelf. In the off state, this mixer perfectly copes with the role of the ordinary shelf, but it is worthwhile to turn the lever and a wide waterfall flow of water appears from the edge of the shelf.

Waterfall mixer-shelf
Waterfall mixer-shelf
Mixer-shelf

The mixer model built into the vertical panel is very popular. In this case, the waterfall flow flows directly from a vertical thin hole located in the center of the panel.

Waterfall mixer, built-in panel

Very interesting mixer - a plate made of tempered glass, which is located above the sink on the chrome leg, and in the center is attached a lever of the original shape. A stream of water flows into the sink through a special spout. Quite often in such models a multicolored backlight is used.

Mixer-plate
Waterfall Faucet
Sliding mixer

To increase the choice of models for buyers, designers use a variety of materials. This and high-strength glass, chrome-plated steel and brass, bronze and ceramics.

Quite often, its rightful place in the design is taken and illumination, because the contemplation of a colored waterfall relaxes and soothes. In addition to the beauty of the water, the light also has a safety function: the color intensity indicates the water temperature, the brighter the color, the hotter it is. This function is very convenient when there are small children in the house.

Waterfall mixers with LED backlight

If you decide to bring individuality and originality to your house, it is enough to take advantage of such a modern technological innovation as a waterfall mixer, because modern cranes have long become a decorative element of interior design. On sale there are many options for modern mixers for every taste and prosperity, from classic low-cost models to ultramodern design developments.

Водопадный смеситель "Каскад"
Designer Waterfall Mixer
Trendy Outdoor Waterfall Faucet

instagram viewer