How to connect a dishwasher: step by step instruction

click fraud protection

Step-by-step installation of the

  1. Step of the power supply installation and the necessary socket for the device.
  2. Stage of preparation of water supply and supply to it.
  3. Step of connecting the drain to the sewer.
  4. Step of monitoring the operation of the dishwashing device.

Below is a diagram for connecting the machine to the above mandatory elements. The order of their installation is determined arbitrarily, but each sequential action should be disassembled into components.
Installing the dishwasher

Power connection

The first thing you need to connect any electrical appliance, including a dishwasher, is to plug it into an outlet that is prepared in advance. In the absence of such a new device, the energy can be provided only by additional efforts.

Each installation process must comply with a number of safety rules:

  1. Do not use tees and extension cords for connection, as they can cause a malfunction and fire of the device due to its high power.
  2. It is not necessary to use a socket from the electric cooker to connect it.
  3. It is necessary to connect a wire 2 mm in diameter from the electrical panel to the socket outlet. In turn, automatic shutdown of electricity when exceeding the load in the electrical panel provides a protective switch for 16 A.
  4. Before connecting the dishwasher it is very important to ensure the grounding of the device. To do this, you must use a three-core cable to connect to the outlet. You can not ground electrical appliances to gas supplies and water supply, as this can be life threatening.

Safety precautions

How to draw water?

A special tap is required to supply water to the dishwasher.

Water supply

The water must be connected to the device in the following order:

  • A water filter is installed on the machine to drain the sand and rust.
  • Then you need to install a shut-off valve in front of the filter, which will resist leaks. It will also become a protection against water ingress, which often leads to flooding of lower floors and apartments.

To not close the shut-off valve after each award, you can use the Aqua-Control and Aqua-Stop system. They will resist the ingress of liquid into the system and will not tolerate the consequences that cause breakdowns and flooding.

  • The set of the dishwasher includes different lengths of hoses, which can be extended with the help of lengths if necessary.
  • Strangely enough, but only some devices can be connected to hot water supply. Electricity is saved in this case.

For Russian homes, it is not worthwhile to connect the centralized water supply to hot water, due to harmful additives in the water that prevent rust formation. And this negatively affects the performance of the device.

Monitoring the operation of the

How do I connect the dishwasher according to the rules for effective operation? Any monitoring of the operation of the dishwasher connection involves attaching it to water and sewerage, and then unloading the unit, at which it is checked:

  1. How quickly water is poured into the appliance;
  2. How the water gets warmed inside;
  3. What modes of drying dishes wash supports the device.

It is recommended not to check the machine modes with the inside of the dishes, but be sure to use the washing and recovery products according to the guidelines. In addition, it is worth checking the tightness of the pipe joint.

When the machine is connected and all the installation recommendations are met, you can move the kitchen furniture to it and fix the closets and countertops on the device.

instagram viewer