Installing a gas stove
The first thing you can never forget is accuracy. Otherwise, if you are not sure of it, it makes sense to invite a specialist whose work you will give not a small amount and no longer want to resort to his services.
The second is self-reliance. If it does not exist, contact the master. It is he who will know what the requirements are for the installation and what is worth paying attention to. The gas service offered to your home will help you find a specialist.
If the installation is made by a gas service employee, your costs will not be so great, it is important only to wait for your turn, the date of arrival of the master. The employee will come and take care that the warranty card and all relevant documents are in order and filled. In any case, if none of the proposed options suits you, you need to start the installation yourself.
Correct documentation
How to connect the gas cooker to the consent of all documents?
Each installation requires such a paper component:
- Documents for possession of the premises.
- State registration.
- Certificate of family composition.
- The contract of gift and purchase-sale of premises, if any.
- Paid receipts and subscriber's book with a passport to the counter.
- Maintenance.
- The passport for the house.
Self-connecting plate according to
instructions Important point in installation: the guarantee for it is indicated not by installation, but from the moment of purchase in the store and if it has stood in your garage for a year, then note that there may be consequences. And before connecting the gas stove, check what warranty period it has.
- Where to place?
After cleaning the device from packaging, having set the adjustment feet, it is worth putting it on the prepared area. It is necessary that there is a gap between the slab and the wall, which is defined by the instruction.
The gas cooker is installed with the help of the building level strictly horizontally. Also set 4 legs, so that the device stays steady against the wall.
- What is the toolkit?
For installation, it is necessary to have the gas wrench 1, the carabiner wrench and the adjustable wrench. Also need a brush and brush, a soap emulsion for quality control. In addition, it is difficult to imagine a plant without a gas hose, which must be in perfect condition and have a ball valve. To properly connect the rubber hose to the pipe, you need to purchase a sealant for sealing, for example for the Hephaestus plate, the Lockteight 55 sealing tape or the Fum tape is suitable. - How to disconnect the old cooker?
First of all, shut off the gas cock and turn off the burners. If the tap is closed, but it is made according to old standards, it should be replaced with a ball valve, because it is much more convenient to operate. It is necessary to have at hand a sealing tape, which is useful for changing the crane.
The diagram below shows the details of each kitchen gas reducer.
- How to connect a gas cooker and hoses to it?
The device itself can be installed independently with a flexible rubber hose. Its optimal length is 3 meters, but it is from 1 to 5. A flexible hose is optimal for installation, since it allows moving the plate if necessary, and this will guarantee safety against gas leaks.
On how to properly connect the plate, clearly and clearly shown in the video below. Study and observe safety precautions, start work. Good luck to you!
