How to glue vinyl wallpaper on non-woven basis

click fraud protection

Wallpapers, as a finishing material have been used for a very long time, and nowadays have become especially popular. Manufacturers do not get tired of making new products in this category of products, constantly improving, enhancing the appearance and improving the quality characteristics of this material. Vinyl wall-paper on a non-woven base is famous for its durability and strength. They not only look great, but it's also a pleasure to work with them. How to glue vinyl wallpaper on non-woven basis? This is what will be discussed later.

Contents

  1. What is necessary for the job?
  2. Vinyl wallpapering steps on non-woven basis
  3. Vinyl wallpaper wallpapering on a non-woven basis

What is necessary for work?

Getting started, you need to prepare the actual vinyl wallpaper on a non-woven basis and the glue suitable for them, and also you need a set of tools and materials:

  • Scissors and a sharp knife;
  • Bucket in which the glue will be made;
  • Spatula;
  • Plumb;
  • Rags;
  • Special roller for wallpaper;
  • Surface, where it will be possible to work with a cut wallpaper( for this the table will completely come down).

The process of pasting walls with wallpaper can not be called very simple and easy, as it will have to make some effort. But choosing in the store is vinyl wallpaper, this task is greatly simplified. It is important not to forget to buy immediately and high-quality glue, which is designed specifically for wallpaper of this type.

Steps of gluing vinyl wallpaper on non-woven basis

The finishing of the walls is a very important moment, because it affects the appearance of the room and the durability of the finish itself. Vinyl wallpapering on a non-woven base is a multi-stage process and consists of 7 steps.

1. Prepare the wallpaper. This means that it is necessary, first of all, to check each roll for color and shade matching, then you can start cutting the canvas. Cutting out the wallpaper, you need to make sure that the drawings are completely matched and create a complete pattern throughout the room. Before you deal with wallpaper you need to prepare the walls, completely eliminating all the defects.

2. Pasting of walls. Working with vinyl wallpaper on a non-woven basis, you can not overwork yourself by applying glue to the wallpaper itself, as it will be enough when applied only to the wall. True, it will not be superfluous to smear the edges prepared for the canvas, which will contribute to better fixation. In order for the wallpaper to lie flat on the wall, you need to make a markup for the future strip before using the level.

3. Angles require special attention. When working with vinyl wallpaper, do not use the technique "through the corner" or "in the corner."Leaving the allowance of one cloth in 5 cm it is necessary to place it in a corner, and the next strip to glue overlap. Passing the point of the knife on the double joint, you can connect them together.

4. Sockets and switches must be completely de-energized at the time of work. The boxes themselves should be removed and the wallpaper properly placed, and in the place of the socket or switch, make a cross-cut cross-section, bending the corners inwards. When the wallpaper is dry, you can set the removed items back.

Watch video how to glue vinyl wallpaper on a non-woven basis on our website, which will help you quickly and easily finish the finishing of the walls with your own hands. And finally, some useful tips.

It is important that the temperature in the room where the work is planned is the same. Also, care must be taken to ensure that there are no drafts.

Not respecting these simple rules can be reduced to "no" all the work, as the wallpaper will not stay on the wall.

Vinyl wallpaper adhesive wallpaper on a non-woven basis

instagram viewer