Modern design technologies are becoming more relevant in conventional homes. And today what can be done by professionals only seems to be done independently. One of the easiest ways to create an unusual and luxurious interior is the use of technology such as epoxy self-leveling floors .On the merits, as well as the technology of their independent production will go further speech.
Contents
- Functionality and aesthetics with your own hands
- Filler film for epoxy flooring
Functionality and aesthetics with your own hands
Epoxy flooring is often called "liquid linoleum" due to the peculiarities of its application and appearance. Epoxy floor filler two-component was used only in industrial premises. Its peculiarity is that thanks to a special way of applying, namely - pouring, a perfectly flat surface is formed. Among other advantages, which distinguish epoxy self-leveling floors in the apartment, also stand out strength, resistance to abrasion, moisture and fire, hygiene and aesthetic appeal.
To make such a floor today is quite simple, without resorting to the services of specialists.
The device for epoxy self-leveling floors provides the following steps:
- Substrate preparation.
- Basic layer fabrication.
- Application of decorative base.
- Applying the last layer.
The first stage involves a thorough cleaning of the surface from any debris and domestic pollution. To do this, you can use a special vacuum cleaner, as well as various cleaning solutions. The ideal surface for applying the substrate is a concrete screed. You can also use a tile, but then the process of preliminary preparation will be delayed. All unevenness should be puttyed, otherwise they will immediately appear on the finished floor.
In order for the epoxy-based filler floor to be easier to apply, the surface must also be primed. If it is fairly porous, then it needs to be primed in several layers. But do not get carried away, because you can get puddles, which can not be allowed. To avoid these puddles, it is recommended to use a spray gun.
To qualitatively make epoxy self-leveling floors with your own hands, you need to use special polymer solutions for leveling. Direct application of the main layer is carried out not earlier than a day after the primer was applied.
To correctly determine the deviations from the horizontal, you can use the level. As a rule, these deviations do not exceed 10 mm. Then, with the help of a squeegee, the surface of the future floor is poured into the prepared mortar in 1-2 layers. In places that are hard to reach for the squeegee, it is better to use a spatula. Then on the surface you need to walk with an aeration roller.
To give a special aesthetics to epoxy fill floors as in the photo, for example, epoxy paint and polyurethane lacquer are used. They not only decorate, but also protect the surface. Apply this paint should not earlier than a week after the second layer was applied. This is the time it takes to dry it up.
The finishing touch in the technology of epoxy flooring is the application of the last layer and cutting of shrinkable seams. The latter are done to avoid possible shrinkage.
Today, the most popular and fashionable in the interior is a transparent epoxy filler floor, with or without decorative elements. With its help, special 3D effects are created in the rooms. Also, to create various decorative elements, chips are used in the process of applying the decorative layer.
In pursuit of the ideal floor, do not forget about the selection of quality materials that provide ease of application and, in the end, the desired effect.
