|
| code What is | What causes the | error? What to do |
| LE | Problem with | door The door is not closed tightly enough. | You need to open the door, and then close it tightly enough. |
| The lock of the hatch has failed. | Check the operability of the lock and, if this part is faulty, repair it. | ||
| OE | Water drainage problem | The drain hose was incorrectly installed or blocked( clogged or clogged). | Check that water is flowing through the drain system. Carry out a revision of the filter and drain hose. |
| The drain pump broke. | Check the operation of the pump, including its circuits. | ||
| UE |
| imbalance problem The laundry inside the drum is knocked down on one side. | Manually re-distribute the laundry inside the tank to eliminate the imbalance that appears. |
| The position of the washing machine is not adjusted. |
Check the position of the machine and adjust it if necessary. | ||
| IE | Problem with water supply | There is no water supply or the tap, through which water is supplied, is closed. | Check the valve and if it is closed, fix this problem. Also make sure that the water is fed into the apartment and its pressure is enough. |
| Water can not pass through a clogged drainage filter. | Inspect the strainer and clean it if it is dirty. | ||
| The solenoid valve has failed. | Test the valve and check the condition of its electrical circuits. | ||
| At too low a temperature, the water intake hose freezes. | After making sure that the reason is in low temperature, take measures to eliminate such a problem. | ||
| The pressure switch broke. | Evaluate the work of the pressure switch with the subsequent replacement of this unit or its repair. | ||
| H6 | Problem with heating element | There was a break in the electrical circuit of the heater. | Check the heater circuits and the operation of the heater itself. |
| E8 | Problem with the load sensor | There is no rotation of the drum due to a load sensor error. | Test the sensor and, if a breakage is detected, replace this part. |
| E9 | Problem with water supply | Malfunction of the pressure switch. | Check the pressostat and its pipes, paying attention to the connecting circuits. If a malfunction is detected, replace the pressure switch with a working unit. |
Although the Daewoo technique is not the most popular on the market, the washing machines of this manufacturer are on sale and are often bought by our compatriots. Such devices are very reliable, but they break like machines from other brands. Due to the presence of self-diagnosis system, the consumer can understand that the device is defective and understand what to do.
Error codes
Frequent faults
Most often, the owners of Daewoo equipment turn to the repair technicians of washing machines for the following reasons:
- The control unit is out of order. This can be manifested by various malfunctions during washing, for example, by increasing the duration of the machine, stopping during washing.
- Water level sensor breaks.
- The filter is clogged in the grouting path.
- Thermal sensor is out of order. At the same time, water does not heat up well and often the machine stops its work during washing.
- The drive belt wears.
- Heater is out of order. Most often, such a breakdown is associated with the formation of TANe scale or rust.
- The tank cuff starts to leak.
Advice and prevention of breakdowns of
- It is important to disconnect the machine from the network before cleaning the Daewoo washing machine.
- While the machine is working, it should not get splashed water to prevent a short circuit.
- Before each wash, check whether the detergent container is empty and remove the old powder or air conditioner residues in time. If there is water after washing in the container, drain it before the next wash before you wash the detergent into the machine.
- To clean the detergent container, turn it anti-clockwise and pull it slightly. After washing the container under running water, it is returned to its place.
- If a rusty object is trapped inside the drum for some time, rust may appear on the tank. To remove it, use special tools, but do not use metal tools or sponges to clean the drum.
- Top of the washing machine should be wiped with a damp cloth, using only acceptable detergents( non-abrasive and free of solvents or benzene).
- Check the incoming water filter regularly to make sure that its mesh is not clogged.
Many are interested in wall models of Daewoo washing machines. The process of washing you can see in the video of Vasily Tolkachev.
For the prevention of malfunctions, it is worth taking a few simple steps that will make life easier for you and extend the life of the washing machine. Details about them are told in the Ukrainian program "Everything will be good."
