Dimensions booth for the German Shepherd and the stages of construction

click fraud protection

How to build a box for a shepherd - choose a place for the enclosure

The area for the enclosure is chosen in a place sufficiently remote from the apartment house, outbuildings, drain pits, roads and toilets. Ideal is a small hill, protected from the wind and scorching sun by garden trees and thick bushes. It is not recommended to keep a shepherd along with other pets or near stables, pig houses and poultry premises, since an unpleasant smell adversely affects the health of the dog and its performance.

Booths are of two types: classical and refined. A habitual and generally accepted option is a one-room structure. Another type of dog kennel is a room with a tambour. The sheep-dog booth with its own hands is most often constructed according to the second variant and is considered the most suitable for its maintenance.

Materials and dimensions of the booth for the German shepherd

The most suitable material for construction is high quality pine wood. A solid sheep-dog booth, the dimensions of which are given below, is assembled from the bars and is covered with plywood. The joints are stitched with a narrow plinth, which reliably protects the material from deformation. Next, consider how to build a box for a shepherd, in which it will be warm and cozy. In order to correctly determine the size of the structure, it is necessary to take measurements from the dog:

  • to measure the area it occupies during sleep is the minimum size of the booth;
  • height of the withers will serve as a guide for determining the height of the kennel.

Experienced breeders recommend the following dimensions when building a booth for a German shepherd:

  • width - 1350 mm;
  • depth - 1000 mm;
  • height - 950 mm.

Dimensions of the foot:

  • width - 400 mm;
  • height - 600 mm.

For the construction of a wooden box, an ordinary carpentry tool is used, which can be found in any owner, namely: a hammer, a hacksaw, a tape measure, a chisel, a screwdriver, a carpentry corner, screws, nails. Next, we will describe in more detail how to make a sheepdog box for .

How to make an enclosure for a shepherd - technical advice

From the previous text you already know that for the construction you will need high-quality pine bars from which the frame is built. It is desirable to make the plywood trim on both sides.

As a heater, it is best to use foam plastic. The floor is laid from solid boards with a thickness of 40 mm. The roof is folded - so much easier to do cleaning and regular disinfection of the kennel. The finished house is installed on a wooden shield inside the enclosure, the rules of construction of which you will learn in the next section.

Now it's time to consider, how to make an enclosure for the sheepdog , and also its optimal dimensions. A properly constructed indoor fence reliably protects the dog from rain, wind, heat and cold at any time of the year. The optimal size of the enclosure for a German shepherd is from 8 to 10 m2.The floor is made of thick boards or asphalt. In order to provide the dog with sufficient visibility, one side of the fence should be equipped with a grating made of steel pipes. All metal parts of the structure are covered with a primer.

Other walling walls are erected from corrugated board, edging board or flat slate. Also, you can recommend using wooden panels, a thickness of at least 1 inch, assembled from sheeted boards and treated with antiseptic solution. The roof is made of a single-edged type from an edging board, as a roofing material use corrugated board or roofing material. The door to the enclosure is installed from the front side.

instagram viewer