The last ten years, the plastic panels that house the walls of the home have become incredibly popular. This is primarily because the cost of such products is relatively low, and the appearance of the premises can be made quite diverse. In addition, the cladding of PVC walls is a fairly simple process. At the same time, such work should take into account a lot of details, which should pay attention to all those who wish to decorate their house with similar material.

Features of plastic material

Some time ago, the popular opinion was that plastic has a negative effect on human health, especially if itchanges into a dwelling. It is worth noting that today there are practically no such problems. Manufacturers have modern technology that allows you to get rid of toxicity. Despite this, too cheap PVC panels for walls can have a sharp smell and other unpleasant features - such a product should be avoided.

One of the main advantages of such products is the diversity of the external component. In most building stores, plastic panels have hundreds of variations of shapes and graphic design.

The seamless shape of the materials makes it possible to use them in residential buildings without any problems. Figures and patterns on the panels can perfectly match with other elements of the interior. Now you can often meet the manufacturers, which without any problems will cover exactly the picture that you need. Despite this, the prices for such PVC panels for walls will not significantly differ from the cost of classical products. The appearance of the panels is limited only by the imagination of the owner, so this product can be safely considered universal.

The disadvantage of most finishing materials can be considered the fact that with their help it is very difficult to trim out hard-to-reach places. To such zones it is possible to carry various ledges, transitions, corners. Sheet PVC panels for walls have the simplest structure, which allows mounting even in the most difficult cases. Cutting material is very easy, and if necessary, you can replace one fragment with another, and at any time.

Many remember that the first plastic panels were quite fragile. Even small loads could seriously damage the material. Now the situation has changed. A special technology for the production of such a coating allows it to withstand heavy weight. Often the owners fix on the panel of massive paintings, as well as other elements of decor. Fixation of any objects is carried out according to the classical technology - with the help of brackets and other fastening elements.

Those who use plastic panels in their homes know that this material is wonderfully combined with other elements of the house. Plastic sockets, ventilation grilles and many other details of the home look great together with a similar coating. Metal attributes of the room are also well combined with this universal material.

Modern technological solutions allow plastic to serve several decades without losing its initial properties. It is also interesting that the PVC panels easily tolerate low temperatures, so that they can sew the walls on the balcony without unnecessary problems.

Controversy about the plastic panels

Many owners mistakenly believe that plastic elements are suitable for any surface. However, it is important to understand that to create smooth walls it is necessary to do some work. Not very high-quality crate can be a serious problem, after covering the wall with plastic, it will look slightly convex, and this should not be allowed. Experts advise to use the level to prevent even the slightest irregularities. The structure of most panels will immediately give out the disadvantages of the surface. Plastering can also be a source of problems, but unlike a billet, fixing the plaster will be much more difficult and more lasting.

Despite the fact that the plaster coating process is quite simple, a beginner with many tasks may not be able to cope. To do this, you just need to know certain subtleties that will help simplify some processes and install the panels in such a way that they look good and lasted as long as possible.

Negative PVC sides

Almost every building material has certain negative sides. Paneling the walls with PVC panels can also cause some problems. First of all, you need to know that plastic is unhygienic. It is for this reason that the given material practically does not finish children's rooms and premises in medical institutions. Also plastic polarizes reflected light.

To ensure that the coating does not harm anyone, you should clean it regularly. This is done extremely simply. You need only a cloth and a solution for washing. It is especially important to pay attention to the panels with massive seams, as they get very dirty if you do not clean regularly. Seamless coatings are extremely easy to clean. It is very important to install fragments so that no voids are formed - they become an attractive dwelling for insects. At the same time, sealing the material is also not a good solution. After a while, the panels and crate can significantly deform and become unusable.

Fire resistance properties of plastic are also not the best, to put it mildly. Of course, it will not be easy to set it on fire, but it should be understood that in the event of a fire, the panels will prove to be a serious source of fire, which will also give off dangerous gases. Obviously, with this scenario, it is not the best idea to finish the whole apartment with this material. Especially do not install PVC panels in the kitchen, because there is a source of fire.

Installation of PVC panels

The overall simplicity of installing panels and is one of the main features of the material. A large fixing shelf is attached to the crate by means of staples or self-tapping screws. On the other side of the material is a small fastening shelf that hangs over the crate. There are many profiles that help to fix fragments. The most popular are the classic corners, without them the entire amount of work will not work. Skirting boards are also important profiles that need to be fastened at the bottom of the panels - at the floor level. Most of the area that is trimmed with plastic, you need to equip the starting and finishing profiles. They do not need to have the same color as the panels, the main thing is that all the elements fit well.

Tools required for wall decoration with plastic

1. To fit the dimensions of individual elements, we need to use a jigsaw. This tool perfectly cuts any part of the panels, leaving no damage or burrs. Often used and a disk saw. In large-scale works, it is even preferable.
2. A construction stapler is required if the plastic fragments are attached to the wood crate.
3. The use of a jigsaw tool will come in handy with a stool that will help securely fix the cutting tool.
4. The need for a plaster trowel is that during the process it is possible to easily bend to him part of the finish profile. Often in this case, use other tools, but it is the spatula that will provide maximum convenience.
5. Rubber mallet will help to easily pull panels to the place. You will not be able to do this with your hands sufficiently reliably, as there will be a chance to pull out the main profile.

The process of mounting plastic panels

As mentioned earlier, the installation of plastic panels is a fairly simple process, but it includes many actions that should be remembered.

1. In the beginning of work it will be necessary to make a crate, on which panels will be fastened.
2. After that you need to set the profiles: guide, start and finish.
3. The first sheet of the panel is installed in the lower profile, then arched and installed in the upper profile.
4. With kyanki, the sheet is tightly assembled towards the starting profile.
5. The rest of the plastic fragments are also attached in the same way except the last one. When the turn of the remaining element comes, it is necessary to be especially careful. This panel must be cut off from the side of the large mounting shelf. You should make a small reserve for the expansion, which often occurs in the warm seasons.
6. Bending the panel of the finish profile, the bottom of the last element is installed. You need to make sure that it is tightly entered in the profile. This will require at least two people. First, a part of the finish profile is taken away, and then the panel is brought up to the upper corner. In the end, it will be necessary to bend the shelves of the mounting and finishing profiles and finally fix the plastic fragment.
7. Next, we need to fix the panel and the finish profile to the crate with a construction stapler.
8. After the main part of the work will need to equip the skirtings.

Features of the creation of the

crate Many people think that there is no special need for a crate, but it should be noted that with this element it will be possible to quickly replace plastic panels and secure them securely.

Do the crate of wood bars, less often - from a metal profile. Small cells that are located behind it can be used for applying insulating materials. To the surface of the wall the crate is attached with screws in dowels or with clamps.

Quite often you can find the use of such an element on the ceiling. This greatly simplifies the process of fixing plastic or metal profiles, as well as creating lighting. The fastening parts of the crate must be installed in increments of up to half a meter. The distance between the bars should be such that the coating of the insulation material is as simple as possible.

Other aspects of the process of plating the rooms with PVC panels

Unambiguously, the paneling of the walls with PVC panels is an excellent option that will save a lot of money and transform the dwelling. Also this product is incredibly practical, unlike tiles, decorative stones and many other materials.

Prices for PVC panels for walls are very diverse, however, you can always find the best option that would satisfy the quality and cost. In any case, the main feature of this product is a huge selection of options that no other finishing material has.