Recommendations for repairing the washing machine Bosch

To repair the washing machine Bosch you will need a standard set of tools, which must be present in each apartment, and the operating manual.

In recent decades, washing machines have become a familiar attribute in private homes and apartments.

The emergence of multifunctional washing machines greatly facilitated the work of housewives.

Washing at all times was considered a difficult affair, which requires a lot of physical effort.

The design of a modern washing machine includes units and assemblies for different purposes. When washing, abnormal situations may occur which require adjustment and repair.

Common types of faults

Today a wide range of washing machines.

The interested consumer has the opportunity to choose for himself the unit that meets his needs.

For a large family, a powerful washing machine is suitable, in which you can load 6-8 kg of laundry.

A single person living alone will have a fairly compact model that is designed for minimal loading.

In the range of household appliances manufactured by Bosch, there are models of different sizes, power and number of operations.

With proper operation, any machine is capable of fail-safe operation for many years.

Over time, the parts and assemblies of the washing machine wear out. This affects the quality of washing and overall performance.

As a rule, the following symptoms indicate the wear of the parts:

• the washing machine does not turn on;
• the water is not dialed;
• the water does not heat up;
• the water does not drain;The
• drum does not rotate.

In order to eliminate the malfunctions by one's own hands, it is necessary to have some experience in the repair work of complex household appliances.

When buying a washing machine, the owner is handed a voucher for warranty service. Within the specified period, in case of any failure, please contact the service center.

Diagnosis and repair

The video shows how to install and connect a washing machine. The installation and commissioning of the washing machine is carried out by the specialists of the service center.

Video:

All the requirements for this procedure are prescribed in the operating instructions. It is desirable for the owner of a washing machine to know all the details of the wiring diagram. Connect it to the regular wiring.

In old buildings, you have to build a special trunk from the switchboard on the site to the place where the washing machine is installed.

If this is not done, the electric wire of insufficient cross-section will heat up and eventually the insulation will be melted with all the sad consequences.

The first thing to look for when installing a Bosch washing machine is its stability.

Using the height adjustment of the legs, it is necessary to achieve a strictly horizontal position of the body.

In this case, no jiggle or swaying should not be.

Under the feet it is recommended to put hard gaskets made of metal or plastic that will prevent the machine from sliding on the smooth tiled floor.

If the machine is installed in a bathroom, then this room should be ventilated regularly. High humidity over time will adversely affect electrical contacts.

Electronic control units are also sensitive to high humidity.

At first the machine works without any failures and delays. Problems of different scale start after systematic violations of the rules of operation.

Video:

Among the typical violations can be attributed excessive loading of the drum. Incorrect selection of the washing schedule.

Even an overdose of washing powder can lead to premature breakage.

Before starting to repair the washing machine at home, you need to again study the instruction manual. Start the inspection of the washing machine from the water supply mechanism.

And the first thing to check is whether the hoses are not leaning. This happens rarely, but you can not rule out this possibility.

Washing machine does not turn on

When, for no apparent reason, the washer has stopped turning on, do not immediately remove the back panel and dig into the electrical circuit.

Bosch washing machine repair is performed in a certain sequence. This sequence should be observed in all situations.

The first thing to do is check the presence of voltage in the network. To do this, pull the plug out of the socket and make sure that everything is in order.

Video:

Then call the circuit until the motor contacts. Then insert the plug into the socket and restart the connection.

If the inclusion does not occur, then you need to remove and repair the electric motor.

The machine does not receive water

This fault occurs for various reasons. The first thing to check is the repair of the washing machine with your own hands, the correct connection and the presence of water in the main.

Sometimes this happens due to the failure of the intake valve.

Dirt, which was not delayed by the input filter, can disable it.

In this case, you have to change the valve to a new one, and at the same time flush the filter. Often, a simple flushing of the filter is sufficient.

If the water level switch is out of order, water will not flow either. And in this situation, the switch needs to be changed.

The water is slowly heated by the

. In case of such trouble, first of all it is necessary to check the serviceability of the thermostat.

The thermostat is designed for measuring the water temperature and switching off the heating when the set level is reached.

If the thermostat is faulty, the shutdown occurs earlier than the set time when the water has not yet warmed up.

Video:

In this case, the repair is to change the thermostat yourself and do not contact the service center.

Water is heated for a long time and when scale is formed on the heater. The video shows a video about how to perform descaling or replacement of a heating element.

The drum does not rotate

If such a breakdown occurs, it can be eliminated at home. To do this, you need to remove the drum and replace the bearings and seals in it. It is not difficult to remove the unwanted drum with one's own hands.

It is necessary to disassemble the machine sequentially, removing the rear wall. The most difficult operation is the removal of the defective bearing from the installation site.

Here it is necessary to exert physical efforts and apply a hammer. The video fixes the operation to replace the bearings on the drum.

Video:

Before installation, new bearings must be lubricated with a special compound that protects the metal against corrosion.

When the repair is completed, it is necessary to check the operability of all parts of the washing machine.

Errors in operation of the

Do not regularly operate the washing machine at maximum loads. This leads to a rapid wear of parts and assemblies.

When loading laundry into the drum, all solid objects must be removed from the pockets and folds. The video shows which items are in the drain filter.

Video:

You can not install programs and switch wash modes when the engine is on. It is necessary to choose and use only suitable detergents.

Incorrect use of washing powders does not contribute to reliable and long-term operation of the washing machine.

Any repair reduces the reliability of the machine as a whole.