For calculating the amount of plasterboard, profile and related materials for the roofing of the ceiling, we recommend using the online calculator.
It will allow you to not only correctly select the right amount of material and related components, save money, but also tell you the assembly technology.
You do not need to think how much and what to buy to cover the required surface with sheets of plasterboard. All this for you will make an online calculator.
Online calculator allows you to calculate the number of gypsum boards, the number of profiles, screws, dowels and related materials.
Of the modern facing materials the most popular in recent years is considered drywall.
With its help you can independently obtain a surface that does not require additional preparation for further finishing.
But when starting to surface any surface, it is necessary to correctly calculate the need for the necessary material in order to avoid overspending.
The proposed online calculator describes the principle of calculating the surface finish of gypsum plasterboard in one layer.
KNAUF sheets are used as facing material.
Getting Started
Width, m |
Height, m |
Description | Consumption of the material | Unit.measurements of |
1 .Gypsum plasterboard KNAUF-GKL( GKLV) | sq. M | |
2. Ceiling profile PP 60/27 | according to meter | |
3 . Profile directing 28/27 | пог.m | |
4. Suspension straight 60/27 | pcs. | |
5. Sealing tape | пог.м | |
6. Plug "K" 6/35 | pcs. | |
7. Self-tapping screw LN 9 | pcs. | |
8a .Self-tapping screw TN 25 | pcs. | |
8 b Screw self-tapping TN 35 | pcs. | |
9 Profile of | pcs. | |
10 Extension of profiles | pcs. | |
11 Tape reinforcing | пог.m. | |
12 Putty "Fugenfüller"( "Unflot") | kg | |
13 .Primer deep universal Knauf-Tiefengrund | l | |
14 Mineral wool board | sq. M |
Online calculator is a program that allows you to make the necessary calculations of consumables, knowing the dimensions of the surface to be faced.
Entering the required parameters, you get the calculation of the need for all the main and related materials that provide the ceiling covering.
Calculation of
In order for the program to start calculations, two parameters must be entered in its fields: the length and height of the surface. When covering the ceiling surface, you need to measure the length and width of the ceiling of the room.
Calculation of the amount of plasterboard, profile begins with the measurement of the length and width of the ceiling of the room in which the ceiling is planned.
Calculate the obtained values into meters and insert them into the appropriate fields.
Do not forget that the values should be translated into meters with fractions separated by a comma.
After filling the fields with the surface dimensions, it remains to press the button "Calculate".
The result is instantaneous.
In the table you will be given the number of gypsum cardboard sheets required in m 2, the number of running meters of profiles, the number of dowels, screws and various associated materials.
To specify the number of sheets, profiles you need to know the size of the materials that you plan to purchase.
Example:
If you use Knauf plasterboard sheet, then do not forget that the sheets are available in size 1.2 × 2.5.The area of each sheet is equal to 3.0 m², respectively.
Knowing the surface area to be lined, divide it by the area of the sheet purchased for work. Get the required number of sheets.
Using an online calculator to calculate the amount of drywall and profile will tell you how much you need to spend to purchase the necessary materials.
The calculator indicates all the necessary materials that are required for high-quality plating of any area. But to use the advice of the calculator online or to calculate independently, you will have to decide for yourself.
I wish you success.