Contents
-
- ceiling wires
- external marking tips
- tips
wireless switching
internal masking internal wall wires
wires The wires on the room wall ruin its overall appearance,the best way is to hide them inward, you need:
- At the place where the wires pass neatly cut the wallpaper with a sharp knife.
- Cut the cut off wallpaper from both sides and fix them with needles.
- In the opened wall, make a groove where the wires will hide.
- Put the wire in the recess.
- It is possible to coat the wires with plaster, or it can be clamped with clay.
- Apply the adhesive in place of the hidden wires and glue the wallpaper back into place.
Wires on the floor
Also, how to hide the wires on the wall, you can do it under the floor. No one will even guess where all the wires in the house have disappeared. There are several options:
- For this, there are special skirting boards that are already sold with a niche for the cable. The central part of the plinth is removed, the cable is put there, and then put this part in place. This is the most convenient and dust-free way.
- If the wires are planned to be hidden during the repair in the floor, then you can break the groove in the floor with a puncher, wire it in the corrugation and put it into this recess. Top with cement.
- When leveling the floor with a cement screed, you will need to stretch the wire in the corrugation, lay it on the floor and from above to do as usual cement screed.
Wire on ceiling
It's easier to hide wires on the ceiling than to the wall. You can do this in different ways:
- Make a decorative niche from gypsum board, it should go along the perimeter of the entire ceiling. In it, you can put all the wires, before they pull them into one trunk. And that the ceiling also looked more aesthetically pleasing, it is possible to equip the same niche in the same niche, which will transform the room in the dark.
- If the ceiling is suspended, the wires are hidden in its niche. This method is good because the wires can be laid in any direction, at least diagonally.
External ways of marking the
If you are not a big fan of repair work and hide the wires in the wall and the floor seems like an impossible task for you, do not despair, it is quite possible to disguise the hated cable from the outside. To do this, came up with several methods:
- Plants - house plants can hide wires from a wall-mounted TV.High dracenas, monsters or ivy wickering on the wall are suitable here. However, you need to be very careful when watering them. You can place artificial flowers instead of live flowers, then you can not worry about watering. And you can not hide the wire, but disguise it, making it a detail of the interior.
- Furniture - if properly placed in the room furniture: a sofa, chairs, chairs, they will help disguise the ugly wires that connect home appliances. Best in this regard will help furniture that has a low clearance from the floor.
- Doors - if you lay the cable along the doors and casing, it will be less noticeable. You also need to watch how and where the shadow falls in the room near the doors, and play with the lighting. Of course, this method works if you only need to hide one wire.
- Carpet - it's good to hide the wires under the carpet, however, you only need to do it around the perimeter near the walls, otherwise you risk having ugly folds on the cover and stumbling on it.
- Special tools. This includes plinths with a removable part for laying the cable, pipe, box. With a reasonable approach, you can lay the cable so that it will be unnoticeable. Options for how to hide the wires can be seen on the photo
Useful tips
- Each cable needs to be labeled from both ends, so even after a while you will not get confused where from what and what wire.
- The wire that carries the data or signal( computer cables, audio and internet, antenna) must be routed separately from the AC mains wires. This way you minimize all noise and noise. The audio and video cable should have a short wiring, the smaller it is, the better the image and sound quality.
- The power cable should also be small in length, the bigger it is, the higher the probability of electric shock: insulation can damage the animal or child, the wire itself can get under the chair or table, and break. All of this can lead to fire or electric shock. So it's better that the cable is shorter and hidden more reliable. It is desirable not to bend the wire, even microcracks in the folding areas can lead to unpleasant consequences.
- Decorative but dangerous cable with fabric braiding. Firstly, with breakage, this fabric can catch fire, and secondly, it gets dirty very quickly and loses its neat appearance.
- The mains cable from the computer should be kept away from fluorescent lighting.
- Always buy and cut as many wires as you want, so that the remnants are not rolled up in a tangle of wires and do not spoil the appearance of the room. If the wires lie under the table, then they can be laid, attaching tape to the back of the countertop.
- Use special decorative boxes to hide the wires. Very often they have an unusual design and fit into almost any interior. The choice of such boxes in the store is very large.
Switching to a wireless network
To not only hide wires in your apartment, but also to limit their number, you need to think about wireless networks. To connect the computer to the Internet and messages with other computers, devices such as Wi-Fi routers have long been invented, and there are systems that transmit data using a conventional household electrical network consisting of already hidden wires in the house. For a landline phone, they also invented a cordless "extension cord" for a long time, as well as for a home theater.
If we talk about household equipment, then in the world of technology, too, there have been significant changes lately. There were wireless stands for TV and audio equipment. There are phone models that can be charged without a special wired device.
Every year, this technique is becoming more and more, and until it all goes to the wireless power supply system of the wire, it is necessary to think where to hide. By the way, experts recommend doing this around the perimeter of the room, so that the radiation that carries the wiring is evenly distributed throughout the room.