We learn more about this type of shingles
There is no clear definition for such a tile, because it is a complex concept that includes several roofing materials. About everything in order.
Bituminous shingles Ruflex .It is represented on the market for about 10 years. During this time, thanks to its excellent performance and high resistance to weather disasters, gained popularity and won its buyer. In addition, this material is absolutely harmless to humans and the environment. Soft tiles are a product of high technology, which is the roofing material of the latest generation. Its advantages are beyond doubt:
- is based on non-woven fiberglass, which increases the tensile and bending strength;
- is used in the manufacture of SBS - modified bitumen, made from high-quality Venezuelan oil;
- increased wear resistance as a result of the application of stone granules as a fill;
- fully automated production with computer-controlled compliance monitoring.
Metal tiles
To prevent the appearance of counterfeits, the company applies the marking on the underside of its products with indelible ink with information about the material.
The main advantages of metal:
- Economy. The roofing life of this material is usually about 50 years. Such a roof does not require special care and repair work.
- Relative lightness of the material. Does not create additional load on the frame of the building. It is recommended if the foundation is not sufficiently reliable.
- Resistance to climatic factors.
- The aesthetic of the roof.
Disadvantages of metal tile:
- When laying on a complex roof, a great loss of material.
- Increased noise. But these are rather shortcomings in the installation of thermal insulation materials.
Bituminous shingles Shinglas is a tile based on oxidized bitumen, and shale crumb is used as a filler.
We lay tiles - preparatory works for
Have you decided to refine your roof? The choice is made - the Finnish tile, its laying is carried out by means of an ordinary hacksaw, a hammer, an acute knife, a tape measure for measurements and a sharpened pencil. Still need a trowel and a bay of chalk rope. BecauseAll work is carried out manually, it is necessary to stock up with working gloves.
Before proceeding, must be thoroughly prepared to prepare the material base.
- The location on which the tiles are to be installed must be cleaned, leveled and dry. Mounting on a wet surface is not permissible. The installation of the metal tile is carried out on the system in the form of a crate, the laying of a flexible tile implies a solid foundation. For these purposes, it is recommended to use moisture-proof plywood or OSB slabs.
- It is necessary to test the structure for deflections, otherwise in places with poor stiffness, the roofing can be destroyed and, as a result, the roof leaks.
- In addition, you need to check the slope of the roof. The minimum required gradient should be at least 11 degrees.
- Waterproofing and vapor barrier of soft roofing.
Tiles and the base are ready, we proceed to mounting
So, everything is ready for packing, you can start the most important one. Let's consider what features Finnish tile has, assembly of which is produced in three stages :
- Installation of the first sheet and, in fact, the cornice row.
The most difficult stage in laying roof tiles. At the very beginning, to improve the waterproofing, a shallow carpet on the ridge is laid. The carpet is chosen according to the color of the shingles. Laying the first sheet begins at the eaves. To do this, a first sheet with an already removed protective film is mounted along the eaves. It must be laid two centimeters above the cornice bend. The next sheet next to the next sheet and fixed in place of perforation nails. And so one by one the entire series is filled.
- Assembly of all other rows.
After laying the cornice series, proceed to mounting the main rows. Remove the protective film and glue the sheet in the direction of the end parts. Depending on the slope of the roof, fix it with 4 or 6 nails. The lower edge of this row should be about 10 mm from the same edge of the cornice row. All the following sheets are arranged in level with the petals of the first.
- Laying of "ridge" sheets.
Cornice tiles must be divided into 3 parts. After that, paste the divided sheet so that the short side is parallel to the ridge. The sheet is fastened with two nails, and these nails are hidden under the next petal, which lies overlapping.
As you can see, the tiles studied by us have a variety of shapes and sizes and is an ideal solution for creating a unique appearance of your house.
