Installation skirting board in the kitchen

click fraud protection

Installation skirting board in the kitchen

The skirting board for the kitchen countertop is needed for the most part not to make the look of the kitchen furniture more finished and beautiful, but for a quite practical function - to fill the space between the wall and the table top.

Kitchen skirting for countertops must be in any kitchen, it does not matter, you do it completely with your own hands, order from the master with the subsequent installation or carry out the installation yourself.

In this article, we'll talk about what kind of kitchen skirting boards are, and also tell you how to attach the skirting board to the table top.

Detailed video instruction will help you to repeat this in your kitchen and save on attracting specialists.

Purpose and types of plinth

As already mentioned, the kitchen plinth is necessary to close the joint between the wall and the table top, which appears after the installation of the kitchen set.

This element of the kitchen is necessary, becauseit protects the furniture from getting moisture on it and then swelling, accumulating food pieces and other small particles behind the countertop, which are very difficult to remove.

As the microclimate in the kitchen, the garbage and crumbs that fall into the set, very quickly begin to decay and rot, which leads to an unpleasant smell, the appearance of mold and fungi, and possibly even greater trouble - for example, the appearance of cockroaches.

Plinth, in turn, will provide in the kitchen sterility, purity and freshness, which should be in this room.
Photo:

In addition, the kitchen plinth helps you to hide the defects of the built-in kitchen and make its position visually more even, which is not always so, because the walls in the apartments are often uneven, or the space device makes an even installation of the kitchen impossible and crevices appearclose with a kitchen skirting board.

This device will tightly seal the joints of the countertop with an apron and tightly connect the surface, so that the furniture organically fit the design of the kitchen and complement the interior.

If you bought a set on order, then it includes a kitchen skirting board, as well as the necessary accessories for its installation: stubs, docking parts.

Such skirting boards are made according to the color of the kitchen set and, as a rule, made of the same material. If you buy furniture yourself, then the choice of plinth will have to deal with you.

It's better that the device you bought is combined in color and material with the entire kitchen.

That is, if your countertop is made of material that mimics a stone, then the accessories must be selected from a similar material.

For wooden coverings, choose the material according to the type of wood from which the table top is made.

The third option is to choose accessories for the furniture texture - for example, metallic color, corresponding to the pens on the kitchen drawers.

You can choose in this case already finished aluminum skirting board, or plastic analog, which has the desired color.

Aluminum and plastic are the most popular materials for manufacturing kitchen skirting boards.

Video:

They are used in the event that it is impossible to choose fittings from a similar material for some reason.

Plastic skirting boards are made of PVC using a co-extrusion method.

First plastic is melted, and then mixed with the desired pigment to get the desired color, or laminate the surface by means of special films that mimic the textures of the materials under which the plinth is made.

The most common types of textures that simulate plastic accessories - stone, wood or metal.

Also the coatings differ in texture and are matte, glossy, shagreen or smooth.

Plastic material is resistant to moisture, it is inexpensive and environmentally friendly.

Similar designs come in a variety of colors and sizes, and it's easy to mount them yourself, because the plastic is easy to cut and bend.

This option is recommended to choose in cases where the wall is uneven, or it needs to be applied to complex shapes.

Aluminum skirting board is more durable, becauseprotected by an oxide film, which is located on top.

Thanks to it, it is resistant to various kinds of loads and applying harmful aggressive cleaning agents.

To serve the aluminum skirting board will be the same as the kitchen set, becausegenerally has no useful life. The most important advantage of aluminum fittings is heat resistance.

Photo:

These plinths are chosen when you need to insulate the countertop near the stove or oven. The price of aluminum materials is more expensive, but in general it is still very affordable.

Form and installation of the

The worktop fittings include shaped and shaped profiles, the length of which can be 3, 3.5 and 4 meters. The entire length of the structure is equipped with a sealant made of silicone.

When the plinth is fixed, the silicone insert fits tightly to the surface and makes the joint as tight as possible, and also protects the end parts of the countertop from water ingress.

The shape of the baseboard plinth repeats an equilateral rectangular triangle, or it can have the shape of a boot that is pulled upward.

Aluminum and plastic types of skirting boards have a base, which is attached to the table top using self-tapping screws, as well as a decorative insert, which must be fixed from the top on the base until it clicks.

To facilitate and accelerate the fastening of the plinth, complete with a blank cover for the left and right side, corners for external sides and other parts for installation.

Fasteners make the same color as the plinth itself.

Fastening the accessories is not difficult, but it is recommended to watch the video before the beginning of the work to clarify all the nuances and from the first time to do the work correctly.

Before you begin to install the accessories on the countertop, you need to divide the whip by removing the decorative base.

Before you begin the installation, you need to know the dimensions of the countertop( measure from the corner) and then transfer them to the profile and cut off the desired part with a hacksaw.

The ends are then cleaned using abrasive.

Before installing the material, it is necessary to treat the space between the table top and the apron with a silicone sealant, so that the material is better adhered to the surface.

The base of the skirting board should be applied to the junction point, and then screwed to the table top.

Video:

Likewise, you need to deal with the side parts: first measure the width of the working surface, and then fix the base from the sides.

To make the base of the kitchen material denser to the surface, it is better to use self-tapping screws with a hat width of 3 or 4.5 mm and a length of 18-25 mm for fixation.

If you bought a wall skirting from ceramics or stone, then to fix it, you need to use a special glue that has a color similar to the color of the profile.

After installation of the structure, it is necessary to fix the connecting angles. To do this, the back of the details made special grooves - with their help, the angle can simply snap on the basis.

So that the decorative insert of the baseboard should rise correctly: that is, it snugly entered the corners, but did not go beyond them, before cutting the material, it is necessary to subtract 3-5 mm from each side of the long side of the countertop. On the resulting figure, and you need to cut the bar.

The decorative part of the plinth must be accurately fixed in the corners and after that a little pressing.

When the bar is locked in the groove along its entire length, you will hear a characteristic click of the design.

After installing this element, you need to cut out the side pieces and install them in the same way.

The last step is to install the stubs. To ensure that they are correctly fixed and fit tightly to the site, before fixing them, you need to process all the details, as well as the ends of the hardware with silicone sealant, and wait until it grapples slightly.

After that, you can insert the stubs, pressing them and holding for a while for maximum fixation.

The installation of skirting on the adhesive is similar, and even faster, but it is less convenient, becauseunder such fittings it will be impossible to hide any communications, the baseboard will fit snugly against the wall.

Photo:

In addition, after removal on the wall will remain quite visible trace from the adhesive, which will not be easy to remove.

The rest of the installation skirting on the adhesive occurs in the same stages. Plugs and other elements are also put similarly.

Before you begin the installation of skirting, look at the auxiliary video - so you will avoid the most common mistakes, and installation of the design takes you no more than a couple of hours.

instagram viewer