What you need to finish the bathroom with plastic panels
In order to begin work on finishing the bathroom with plastic panels, you need to prepare a number of tools and materials:
- Panels made of polyvinylchloride.
- Strips for the crate.
- Mounting stapler.
- Mounting knife.
- Additional tools.
We sew the bathroom with plastic panels: the action plan
The work on finishing the bathroom with plastic panels consists of several step-by-step measures:
- Preparation for work.
- Creation of originality of bathroom interior.
- Fastening brackets.
- Preparation of PVC panels.
- Getting started.
- Work in the corner of the room.
- Using additional elements.
Step-by-step instruction: how to make a bathroom with plastic panels.
Step 1: prepare for finishing the bathroom
For the bathroom it is best to use plastic facing panels of light tones. Before starting, prepare all the elements necessary for the job. These elements are themselves plastic panels, wooden slats, pre-treated with a water repellent, fastening materials.
Step 2: think through the design of the finish
To achieve originality, you can use not only the variety of colors of panels, but also the combination of sizes. It means the alternation of wide and narrow PVC panels.
Step 3: fix the crate for plastic panels
Wooden strips, impregnated with a water repellent, must be fastened to the wall in such a way that they are parallel to the floor surface. To keep the bars at the same level, you need to use a level and a plumb line.
Step 4: Prepare PVC panels for fastening
Before using plastic panels, it is necessary to check them for any contaminants. Also, do not start the installation of PVC panels immediately after their transportation. Building materials should lie a little in the room after delivery and "get used to" the environment.
Step 5: proceed to finish the bathroom with plastic panels
Begin the installation of plastic panels from the doorway. They are worth attaching a groove in the direction of the next element. As fasteners, it is best to use self-tapping screws or a mounting stapler. Stapler greatly facilitates and speeds up the work.
Step 6: the cornerstone of the paneling - the corners of the
After the mounting has approached the corner of the room, you need to measure with a straight ruler the distance from the last element to the next, after which it is necessary to cut the material and attach it along the line.
Step 7: Accessories and accessories for installing
panels. Additional materials are considered to be materials such as skirting boards, treads, plastic corners and finishing rails. Materials should be fastened 20 minutes after the installation of plastic panels, pre-lubricated with waterproof glue.
Thus, the article described and described the process of installing plastic panels in the bathroom.
