How to Install the Lifting Gates for Your Garage by Your Own Hands

click fraud protection

We are accustomed to the traditional execution of the garage door leaf - a swing type. However, the lifting gates are becoming more popular. Those who use the car every day and appreciate their time, consider them more convenient.

They differ in their design features and can be of several types. Rolling ones are rarely used, so it makes no sense to stop them. The most common models of lifting gates for the garage are sectional and one-piece( lifting-rotary).

In the first they consist of several sections( 40 - 60 cm) long, in the frame of which can be stacked panels of different materials: metal, plastic, even wood. Joints between them are sealed + additional insulation is made. The fastening of the components is articulated.

goal

Lifting and rotary structures are more reliable( in terms of ensuring the safety of the garage) and are considered the most convenient in terms of self-manufacturing.

But the general principle of work is the same. During the opening of the garage, the gate leaf rises upwards, under the ceiling, which saves space considerably.

It is worthwhile to clarify that experts do not advise you to make lifting gates from scratch. This is due to many difficulties, including, and in calculations. Mainly, the assumed loads, the sizes of springs( or counterweights) and many other "nuances".It is also important how reliable the mechanism of fixing the leaf in a certain position is.




Therefore, it is more expedient to use elements of factory production and mount them yourself. Moreover, a specialized organization, even if the product is purchased from her, installs the gate for a fee. Installation of the entire structure can reach 10 - 12 000 rubles, and the price for the installation of elements of mechanics and automation - from 3 600 rubles, depending on the "bells and whistles."Therefore, if you put it yourself, you can save a lot.

Different Manufacturers offer a variety of gate options that differ in many ways. Each assembly is accompanied by the installation instructions. However, sometimes it may not reflect the individual points about which the future owner should know. Yes, and the criteria for selecting the model should also be indicated.

rsd

What to look for

Frame structure

A metal frame is better than a wooden frame. In some types of gates there is a gate, however such "model" will complicate not only the installation, but also the further operation. Although on the other hand, if the car costs "in the middle" in winter, the heat loss will be significantly reduced, since in order to get into the garage( for example, go down to the cellar), you do not have to lift the entire leaf. On the insulation of the gate read in this article.

But the wicket leads to an increase in price, and the amount is decent - up to 10 - 14 thousand rubles.

Fastening of

guides It should be noted that the weight of the lifting gate leaf is quite significant. In addition, additional axial loads will be created in the dynamics( opening / closing).Therefore, from the fixation of the rail elements depends not only the reliability of the operation of the mechanisms, but also personal safety.

The rotary-rotary model is considered preferable. And not only in terms of ensuring the security of the premises. The presence of sections implies their connection with hinges. Consequently, there is a risk of failure of one of the fixtures. In other words, sectional type gates are less reliable in terms of intensive operation.

In addition, the lifting and tilting model of the door works almost silently, which can not be said about the doors, especially when the sliding elements wear heavily.

Lifting and garage doors

Panel

The door leaf must be securely( hermetically sealed) during the closing of the entire opening. This is necessary not only to prevent unauthorized entry inside, but also to maintain a certain microclimate. This is one way to extend the life of the car without any repairs. In addition, we must not forget about the cellar, which is practically in every garage.

In

's Content

All load-bearing elements of the structure are made of metal that does not corrode, or are carefully treated with anti-corrosive compounds. Couplings, rollers - plastic + steel is allowed.

Mechanics

Manual drive reduces the total cost of the kit by about 4 - 5 000 rubles. It is less convenient, but more reliable. The probability of failure is minimal. The swivel mechanism is preferable, since it is more practical.

The construction on counterweights should be chosen for large panel sizes( and therefore, its impressive weight).

What to Foresee

Repairability of

The fact that failure is inevitable over time is understandable. However, not every mechanism is repairable. Sometimes it happens that you have to change the whole assembly or a separate node, and this turns out to be a pretty penny.

In addition, is it possible to purchase new parts? What, where, delivery time? The question is far from idle.

warranty terms First of all, , does it exist at all and for how long?

Secondly, , under what conditions is it canceled? This is an important detail. Is not the installation of the gate itself a violation of its conditions?

On what you can save

  • On the dimensions of the canvas.
  • On the exterior design. Additional coatings, fashionable colors entail an increase in the final cost.

instagram viewer