Home remedies
In order to remove the debris from the soles, it is not always necessary to turn off the iron, you can use a soft rag and wadded disc. In addition, do not rub the surface of the tin, as scratches can spoil the delicate fabric. Therefore, we provide a number of effective and proven in practice tools for caring for the working surface of the iron. We will conditionally divide the funds into two types: home and operational.
- vinegar;
- lemon;
- citric acid;
- hydrogen peroxide;
- soda;
- salt;
- newspaper;
- paraffin.
How do I clean the iron from the sludge with a soda solution? They wet a rag and just wipe the sole. You can also apply soda slurry to the preheated iron and hold for a few minutes. After a lot of rubbing on the burner and under this effect, it will be washed with water and a cloth. Remains of soda carefully cleaned, otherwise it will damage the tissues that will have to be ironed.
Also used as a solution with water. Complex and difficult to clean spots are erased by them. For him, the unpleasant smell remains negative, so cleaning should be done in a ventilated room. You can replace vinegar with citric acid, which also affects the smelting.
Dedovskiy, but this is no less effective way. A distinctive feature of the method of cleaning the iron with a newspaper is comparative softness, so the newspaper can clean sensitive surfaces without fear of damaging them with a hard abrasive.
The main thing is for the method to be really working, not to wait for the formation of a serious stash, but to carry out the procedure on a regular basis.
The iron should be heated to make the carbon deposit softer, after which the crumpled newspaper rubs the surface. The remaining stains should be easily removed with a damp cloth after the iron has cooled.
Apply a solution to the dense cloth and wipe the surface. Purifies the dark carbon and adherent villi from the tissues.
This agent is very effective for removing polyethylene residues or decorative plastic.
But how to clean the iron from the salt residue, you ask, and the answer is extremely simple. It is laid in gauze or paper and stitched over the folded lump until the prigar is on a lump of salt. Also, the salt is scattered on a piece of cloth and directly ground with a sole. Gradually, the salt begins to acquire a brown shade due to burning, which is rubbed off on the crystals of salt. The main thing, do not take in head to rub the Teflon coating over large crystals of salt.
Paraffin is used in this way. Wipe the surface with wax and put the iron so that the wax drips onto it. Then switch on the mains. Paraffin melts, with it melts and fumes.
How to clean the iron from the sting: operational methods
In modern household chemistry stores sell a chemical pencil, which acts as a kind of reagent with the heat and literally dissolves it. It is necessary to rub the warm soleplate of the iron with this remedy and leave it for a while. The pencil softens the fumes, and it is easily wiped off with a wet cloth. The method, firstly eliminates the pain of manual work with the problem, and secondly it is simple and quickly available( inexpensive), as there is in every store of manufactured goods. Also in these stores you can buy a non-stick pad that is cheap and long-serving. The principle of operation is obvious - it does not burn.
In addition to operational methods include a tablet of hydropyrites, which can also be bought in an industrial store. It acts on a warm iron in a ventilated room. It reacts chemically and releases harmful gases and odor to the body. But plus this method is that the mechanical effect on the device is reduced several times, and the smell is eliminated by 3% hydrogen peroxide solution applied previously to the sole.
Self-cleaning mode
Use the self-cleaning mode on the device. But if there is none, you can make a homemade cleaner for cleaning. To do this, pour water into the pan, add a descaling agent and citric acid to it, then put two sticks or cutlery. And on top of this design set the iron. Citric acid and water with the product dissolve the coating. The exposure time of this remedy is up to half an hour. Then the entire device is wiped off and brought to an absolute drying. To check it, you can pat the unnecessary thing to see if he can iron elegant fabrics.
